| //===- GVNHoist.cpp - Hoist scalar and load expressions -------------------===// | |
| // | |
| // The LLVM Compiler Infrastructure | |
| // | |
| // This file is distributed under the University of Illinois Open Source | |
| // License. See LICENSE.TXT for details. | |
| // | |
| //===----------------------------------------------------------------------===// | |
| // | |
| // This pass hoists expressions from branches to a common dominator. It uses | |
| // GVN (global value numbering) to discover expressions computing the same | |
| // values. The primary goals of code-hoisting are: | |
| // 1. To reduce the code size. | |
| // 2. In some cases reduce critical path (by exposing more ILP). | |
| // | |
| // The algorithm factors out the reachability of values such that multiple | |
| // queries to find reachability of values are fast. This is based on finding the | |
| // ANTIC points in the CFG which do not change during hoisting. The ANTIC points | |
| // are basically the dominance-frontiers in the inverse graph. So we introduce a | |
| // data structure (CHI nodes) to keep track of values flowing out of a basic | |
| // block. We only do this for values with multiple occurrences in the function | |
| // as they are the potential hoistable candidates. This approach allows us to | |
| // hoist instructions to a basic block with more than two successors, as well as | |
| // deal with infinite loops in a trivial way. | |
| // | |
| // Limitations: This pass does not hoist fully redundant expressions because | |
| // they are already handled by GVN-PRE. It is advisable to run gvn-hoist before | |
| // and after gvn-pre because gvn-pre creates opportunities for more instructions | |
| // to be hoisted. | |
| // | |
| // Hoisting may affect the performance in some cases. To mitigate that, hoisting | |
| // is disabled in the following cases. | |
| // 1. Scalars across calls. | |
| // 2. geps when corresponding load/store cannot be hoisted. | |
| //===----------------------------------------------------------------------===// | |
| #include "llvm/ADT/DenseMap.h" | |
| #include "llvm/ADT/DenseSet.h" | |
| #include "llvm/ADT/STLExtras.h" | |
| #include "llvm/ADT/SmallPtrSet.h" | |
| #include "llvm/ADT/SmallVector.h" | |
| #include "llvm/ADT/Statistic.h" | |
| #include "llvm/ADT/iterator_range.h" | |
| #include "llvm/Analysis/AliasAnalysis.h" | |
| #include "llvm/Analysis/GlobalsModRef.h" | |
| #include "llvm/Analysis/IteratedDominanceFrontier.h" | |
| #include "llvm/Analysis/MemoryDependenceAnalysis.h" | |
| #include "llvm/Analysis/MemorySSA.h" | |
| #include "llvm/Analysis/MemorySSAUpdater.h" | |
| #include "llvm/Analysis/PostDominators.h" | |
| #include "llvm/Transforms/Utils/Local.h" | |
| #include "llvm/Analysis/ValueTracking.h" | |
| #include "llvm/IR/Argument.h" | |
| #include "llvm/IR/BasicBlock.h" | |
| #include "llvm/IR/CFG.h" | |
| #include "llvm/IR/Constants.h" | |
| #include "llvm/IR/Dominators.h" | |
| #include "llvm/IR/Function.h" | |
| #include "llvm/IR/InstrTypes.h" | |
| #include "llvm/IR/Instruction.h" | |
| #include "llvm/IR/Instructions.h" | |
| #include "llvm/IR/IntrinsicInst.h" | |
| #include "llvm/IR/Intrinsics.h" | |
| #include "llvm/IR/LLVMContext.h" | |
| #include "llvm/IR/PassManager.h" | |
| #include "llvm/IR/Use.h" | |
| #include "llvm/IR/User.h" | |
| #include "llvm/IR/Value.h" | |
| #include "llvm/Pass.h" | |
| #include "llvm/Support/Casting.h" | |
| #include "llvm/Support/CommandLine.h" | |
| #include "llvm/Support/Debug.h" | |
| #include "llvm/Support/raw_ostream.h" | |
| #include "llvm/Transforms/Scalar.h" | |
| #include "llvm/Transforms/Scalar/GVN.h" | |
| #include <algorithm> | |
| #include <cassert> | |
| #include <iterator> | |
| #include <memory> | |
| #include <utility> | |
| #include <vector> | |
| using namespace llvm; | |
| #define DEBUG_TYPE "gvn-hoist" | |
| STATISTIC(NumHoisted, "Number of instructions hoisted"); | |
| STATISTIC(NumRemoved, "Number of instructions removed"); | |
| STATISTIC(NumLoadsHoisted, "Number of loads hoisted"); | |
| STATISTIC(NumLoadsRemoved, "Number of loads removed"); | |
| STATISTIC(NumStoresHoisted, "Number of stores hoisted"); | |
| STATISTIC(NumStoresRemoved, "Number of stores removed"); | |
| STATISTIC(NumCallsHoisted, "Number of calls hoisted"); | |
| STATISTIC(NumCallsRemoved, "Number of calls removed"); | |
| static cl::opt<int> | |
| MaxHoistedThreshold("gvn-max-hoisted", cl::Hidden, cl::init(-1), | |
| cl::desc("Max number of instructions to hoist " | |
| "(default unlimited = -1)")); | |
| static cl::opt<int> MaxNumberOfBBSInPath( | |
| "gvn-hoist-max-bbs", cl::Hidden, cl::init(4), | |
| cl::desc("Max number of basic blocks on the path between " | |
| "hoisting locations (default = 4, unlimited = -1)")); | |
| static cl::opt<int> MaxDepthInBB( | |
| "gvn-hoist-max-depth", cl::Hidden, cl::init(100), | |
| cl::desc("Hoist instructions from the beginning of the BB up to the " | |
| "maximum specified depth (default = 100, unlimited = -1)")); | |
| static cl::opt<int> | |
| MaxChainLength("gvn-hoist-max-chain-length", cl::Hidden, cl::init(10), | |
| cl::desc("Maximum length of dependent chains to hoist " | |
| "(default = 10, unlimited = -1)")); | |
| namespace llvm { | |
| using BBSideEffectsSet = DenseMap<const BasicBlock *, bool>; | |
| using SmallVecInsn = SmallVector<Instruction *, 4>; | |
| using SmallVecImplInsn = SmallVectorImpl<Instruction *>; | |
| // Each element of a hoisting list contains the basic block where to hoist and | |
| // a list of instructions to be hoisted. | |
| using HoistingPointInfo = std::pair<BasicBlock *, SmallVecInsn>; | |
| using HoistingPointList = SmallVector<HoistingPointInfo, 4>; | |
| // A map from a pair of VNs to all the instructions with those VNs. | |
| using VNType = std::pair<unsigned, unsigned>; | |
| using VNtoInsns = DenseMap<VNType, SmallVector<Instruction *, 4>>; | |
| // CHI keeps information about values flowing out of a basic block. It is | |
| // similar to PHI but in the inverse graph, and used for outgoing values on each | |
| // edge. For conciseness, it is computed only for instructions with multiple | |
| // occurrences in the CFG because they are the only hoistable candidates. | |
| // A (CHI[{V, B, I1}, {V, C, I2}] | |
| // / \ | |
| // / \ | |
| // B(I1) C (I2) | |
| // The Value number for both I1 and I2 is V, the CHI node will save the | |
| // instruction as well as the edge where the value is flowing to. | |
| struct CHIArg { | |
| VNType VN; | |
| // Edge destination (shows the direction of flow), may not be where the I is. | |
| BasicBlock *Dest; | |
| // The instruction (VN) which uses the values flowing out of CHI. | |
| Instruction *I; | |
| bool operator==(const CHIArg &A) { return VN == A.VN; } | |
| bool operator!=(const CHIArg &A) { return !(*this == A); } | |
| }; | |
| using CHIIt = SmallVectorImpl<CHIArg>::iterator; | |
| using CHIArgs = iterator_range<CHIIt>; | |
| using OutValuesType = DenseMap<BasicBlock *, SmallVector<CHIArg, 2>>; | |
| using InValuesType = | |
| DenseMap<BasicBlock *, SmallVector<std::pair<VNType, Instruction *>, 2>>; | |
| // An invalid value number Used when inserting a single value number into | |
| // VNtoInsns. | |
| enum : unsigned { InvalidVN = ~2U }; | |
| // Records all scalar instructions candidate for code hoisting. | |
| class InsnInfo { | |
| VNtoInsns VNtoScalars; | |
| public: | |
| // Inserts I and its value number in VNtoScalars. | |
| void insert(Instruction *I, GVN::ValueTable &VN) { | |
| // Scalar instruction. | |
| unsigned V = VN.lookupOrAdd(I); | |
| VNtoScalars[{V, InvalidVN}].push_back(I); | |
| } | |
| const VNtoInsns &getVNTable() const { return VNtoScalars; } | |
| }; | |
| // Records all load instructions candidate for code hoisting. | |
| class LoadInfo { | |
| VNtoInsns VNtoLoads; | |
| public: | |
| // Insert Load and the value number of its memory address in VNtoLoads. | |
| void insert(LoadInst *Load, GVN::ValueTable &VN) { | |
| if (Load->isSimple()) { | |
| unsigned V = VN.lookupOrAdd(Load->getPointerOperand()); | |
| VNtoLoads[{V, InvalidVN}].push_back(Load); | |
| } | |
| } | |
| const VNtoInsns &getVNTable() const { return VNtoLoads; } | |
| }; | |
| // Records all store instructions candidate for code hoisting. | |
| class StoreInfo { | |
| VNtoInsns VNtoStores; | |
| public: | |
| // Insert the Store and a hash number of the store address and the stored | |
| // value in VNtoStores. | |
| void insert(StoreInst *Store, GVN::ValueTable &VN) { | |
| if (!Store->isSimple()) | |
| return; | |
| // Hash the store address and the stored value. | |
| Value *Ptr = Store->getPointerOperand(); | |
| Value *Val = Store->getValueOperand(); | |
| VNtoStores[{VN.lookupOrAdd(Ptr), VN.lookupOrAdd(Val)}].push_back(Store); | |
| } | |
| const VNtoInsns &getVNTable() const { return VNtoStores; } | |
| }; | |
| // Records all call instructions candidate for code hoisting. | |
| class CallInfo { | |
| VNtoInsns VNtoCallsScalars; | |
| VNtoInsns VNtoCallsLoads; | |
| VNtoInsns VNtoCallsStores; | |
| public: | |
| // Insert Call and its value numbering in one of the VNtoCalls* containers. | |
| void insert(CallInst *Call, GVN::ValueTable &VN) { | |
| // A call that doesNotAccessMemory is handled as a Scalar, | |
| // onlyReadsMemory will be handled as a Load instruction, | |
| // all other calls will be handled as stores. | |
| unsigned V = VN.lookupOrAdd(Call); | |
| auto Entry = std::make_pair(V, InvalidVN); | |
| if (Call->doesNotAccessMemory()) | |
| VNtoCallsScalars[Entry].push_back(Call); | |
| else if (Call->onlyReadsMemory()) | |
| VNtoCallsLoads[Entry].push_back(Call); | |
| else | |
| VNtoCallsStores[Entry].push_back(Call); | |
| } | |
| const VNtoInsns &getScalarVNTable() const { return VNtoCallsScalars; } | |
| const VNtoInsns &getLoadVNTable() const { return VNtoCallsLoads; } | |
| const VNtoInsns &getStoreVNTable() const { return VNtoCallsStores; } | |
| }; | |
| static void combineKnownMetadata(Instruction *ReplInst, Instruction *I) { | |
| static const unsigned KnownIDs[] = { | |
| LLVMContext::MD_tbaa, LLVMContext::MD_alias_scope, | |
| LLVMContext::MD_noalias, LLVMContext::MD_range, | |
| LLVMContext::MD_fpmath, LLVMContext::MD_invariant_load, | |
| LLVMContext::MD_invariant_group}; | |
| combineMetadata(ReplInst, I, KnownIDs); | |
| } | |
| // This pass hoists common computations across branches sharing common | |
| // dominator. The primary goal is to reduce the code size, and in some | |
| // cases reduce critical path (by exposing more ILP). | |
| class GVNHoist { | |
| public: | |
| GVNHoist(DominatorTree *DT, PostDominatorTree *PDT, AliasAnalysis *AA, | |
| MemoryDependenceResults *MD, MemorySSA *MSSA) | |
| : DT(DT), PDT(PDT), AA(AA), MD(MD), MSSA(MSSA), | |
| MSSAUpdater(llvm::make_unique<MemorySSAUpdater>(MSSA)) {} | |
| bool run(Function &F) { | |
| NumFuncArgs = F.arg_size(); | |
| VN.setDomTree(DT); | |
| VN.setAliasAnalysis(AA); | |
| VN.setMemDep(MD); | |
| bool Res = false; | |
| // Perform DFS Numbering of instructions. | |
| unsigned BBI = 0; | |
| for (const BasicBlock *BB : depth_first(&F.getEntryBlock())) { | |
| DFSNumber[BB] = ++BBI; | |
| unsigned I = 0; | |
| for (auto &Inst : *BB) | |
| DFSNumber[&Inst] = ++I; | |
| } | |
| int ChainLength = 0; | |
| // FIXME: use lazy evaluation of VN to avoid the fix-point computation. | |
| while (true) { | |
| if (MaxChainLength != -1 && ++ChainLength >= MaxChainLength) | |
| return Res; | |
| auto HoistStat = hoistExpressions(F); | |
| if (HoistStat.first + HoistStat.second == 0) | |
| return Res; | |
| if (HoistStat.second > 0) | |
| // To address a limitation of the current GVN, we need to rerun the | |
| // hoisting after we hoisted loads or stores in order to be able to | |
| // hoist all scalars dependent on the hoisted ld/st. | |
| VN.clear(); | |
| Res = true; | |
| } | |
| return Res; | |
| } | |
| // Copied from NewGVN.cpp | |
| // This function provides global ranking of operations so that we can place | |
| // them in a canonical order. Note that rank alone is not necessarily enough | |
| // for a complete ordering, as constants all have the same rank. However, | |
| // generally, we will simplify an operation with all constants so that it | |
| // doesn't matter what order they appear in. | |
| unsigned int rank(const Value *V) const { | |
| // Prefer constants to undef to anything else | |
| // Undef is a constant, have to check it first. | |
| // Prefer smaller constants to constantexprs | |
| if (isa<ConstantExpr>(V)) | |
| return 2; | |
| if (isa<UndefValue>(V)) | |
| return 1; | |
| if (isa<Constant>(V)) | |
| return 0; | |
| else if (auto *A = dyn_cast<Argument>(V)) | |
| return 3 + A->getArgNo(); | |
| // Need to shift the instruction DFS by number of arguments + 3 to account | |
| // for the constant and argument ranking above. | |
| auto Result = DFSNumber.lookup(V); | |
| if (Result > 0) | |
| return 4 + NumFuncArgs + Result; | |
| // Unreachable or something else, just return a really large number. | |
| return ~0; | |
| } | |
| private: | |
| GVN::ValueTable VN; | |
| DominatorTree *DT; | |
| PostDominatorTree *PDT; | |
| AliasAnalysis *AA; | |
| MemoryDependenceResults *MD; | |
| MemorySSA *MSSA; | |
| std::unique_ptr<MemorySSAUpdater> MSSAUpdater; | |
| DenseMap<const Value *, unsigned> DFSNumber; | |
| BBSideEffectsSet BBSideEffects; | |
| DenseSet<const BasicBlock *> HoistBarrier; | |
| SmallVector<BasicBlock *, 32> IDFBlocks; | |
| unsigned NumFuncArgs; | |
| const bool HoistingGeps = false; | |
| enum InsKind { Unknown, Scalar, Load, Store }; | |
| // Return true when there are exception handling in BB. | |
| bool hasEH(const BasicBlock *BB) { | |
| auto It = BBSideEffects.find(BB); | |
| if (It != BBSideEffects.end()) | |
| return It->second; | |
| if (BB->isEHPad() || BB->hasAddressTaken()) { | |
| BBSideEffects[BB] = true; | |
| return true; | |
| } | |
| if (BB->getTerminator()->mayThrow()) { | |
| BBSideEffects[BB] = true; | |
| return true; | |
| } | |
| BBSideEffects[BB] = false; | |
| return false; | |
| } | |
| // Return true when a successor of BB dominates A. | |
| bool successorDominate(const BasicBlock *BB, const BasicBlock *A) { | |
| for (const BasicBlock *Succ : BB->getTerminator()->successors()) | |
| if (DT->dominates(Succ, A)) | |
| return true; | |
| return false; | |
| } | |
| // Return true when I1 appears before I2 in the instructions of BB. | |
| bool firstInBB(const Instruction *I1, const Instruction *I2) { | |
| assert(I1->getParent() == I2->getParent()); | |
| unsigned I1DFS = DFSNumber.lookup(I1); | |
| unsigned I2DFS = DFSNumber.lookup(I2); | |
| assert(I1DFS && I2DFS); | |
| return I1DFS < I2DFS; | |
| } | |
| // Return true when there are memory uses of Def in BB. | |
| bool hasMemoryUse(const Instruction *NewPt, MemoryDef *Def, | |
| const BasicBlock *BB) { | |
| const MemorySSA::AccessList *Acc = MSSA->getBlockAccesses(BB); | |
| if (!Acc) | |
| return false; | |
| Instruction *OldPt = Def->getMemoryInst(); | |
| const BasicBlock *OldBB = OldPt->getParent(); | |
| const BasicBlock *NewBB = NewPt->getParent(); | |
| bool ReachedNewPt = false; | |
| for (const MemoryAccess &MA : *Acc) | |
| if (const MemoryUse *MU = dyn_cast<MemoryUse>(&MA)) { | |
| Instruction *Insn = MU->getMemoryInst(); | |
| // Do not check whether MU aliases Def when MU occurs after OldPt. | |
| if (BB == OldBB && firstInBB(OldPt, Insn)) | |
| break; | |
| // Do not check whether MU aliases Def when MU occurs before NewPt. | |
| if (BB == NewBB) { | |
| if (!ReachedNewPt) { | |
| if (firstInBB(Insn, NewPt)) | |
| continue; | |
| ReachedNewPt = true; | |
| } | |
| } | |
| if (MemorySSAUtil::defClobbersUseOrDef(Def, MU, *AA)) | |
| return true; | |
| } | |
| return false; | |
| } | |
| bool hasEHhelper(const BasicBlock *BB, const BasicBlock *SrcBB, | |
| int &NBBsOnAllPaths) { | |
| // Stop walk once the limit is reached. | |
| if (NBBsOnAllPaths == 0) | |
| return true; | |
| // Impossible to hoist with exceptions on the path. | |
| if (hasEH(BB)) | |
| return true; | |
| // No such instruction after HoistBarrier in a basic block was | |
| // selected for hoisting so instructions selected within basic block with | |
| // a hoist barrier can be hoisted. | |
| if ((BB != SrcBB) && HoistBarrier.count(BB)) | |
| return true; | |
| return false; | |
| } | |
| // Return true when there are exception handling or loads of memory Def | |
| // between Def and NewPt. This function is only called for stores: Def is | |
| // the MemoryDef of the store to be hoisted. | |
| // Decrement by 1 NBBsOnAllPaths for each block between HoistPt and BB, and | |
| // return true when the counter NBBsOnAllPaths reaces 0, except when it is | |
| // initialized to -1 which is unlimited. | |
| bool hasEHOrLoadsOnPath(const Instruction *NewPt, MemoryDef *Def, | |
| int &NBBsOnAllPaths) { | |
| const BasicBlock *NewBB = NewPt->getParent(); | |
| const BasicBlock *OldBB = Def->getBlock(); | |
| assert(DT->dominates(NewBB, OldBB) && "invalid path"); | |
| assert(DT->dominates(Def->getDefiningAccess()->getBlock(), NewBB) && | |
| "def does not dominate new hoisting point"); | |
| // Walk all basic blocks reachable in depth-first iteration on the inverse | |
| // CFG from OldBB to NewBB. These blocks are all the blocks that may be | |
| // executed between the execution of NewBB and OldBB. Hoisting an expression | |
| // from OldBB into NewBB has to be safe on all execution paths. | |
| for (auto I = idf_begin(OldBB), E = idf_end(OldBB); I != E;) { | |
| const BasicBlock *BB = *I; | |
| if (BB == NewBB) { | |
| // Stop traversal when reaching HoistPt. | |
| I.skipChildren(); | |
| continue; | |
| } | |
| if (hasEHhelper(BB, OldBB, NBBsOnAllPaths)) | |
| return true; | |
| // Check that we do not move a store past loads. | |
| if (hasMemoryUse(NewPt, Def, BB)) | |
| return true; | |
| // -1 is unlimited number of blocks on all paths. | |
| if (NBBsOnAllPaths != -1) | |
| --NBBsOnAllPaths; | |
| ++I; | |
| } | |
| return false; | |
| } | |
| // Return true when there are exception handling between HoistPt and BB. | |
| // Decrement by 1 NBBsOnAllPaths for each block between HoistPt and BB, and | |
| // return true when the counter NBBsOnAllPaths reaches 0, except when it is | |
| // initialized to -1 which is unlimited. | |
| bool hasEHOnPath(const BasicBlock *HoistPt, const BasicBlock *SrcBB, | |
| int &NBBsOnAllPaths) { | |
| assert(DT->dominates(HoistPt, SrcBB) && "Invalid path"); | |
| // Walk all basic blocks reachable in depth-first iteration on | |
| // the inverse CFG from BBInsn to NewHoistPt. These blocks are all the | |
| // blocks that may be executed between the execution of NewHoistPt and | |
| // BBInsn. Hoisting an expression from BBInsn into NewHoistPt has to be safe | |
| // on all execution paths. | |
| for (auto I = idf_begin(SrcBB), E = idf_end(SrcBB); I != E;) { | |
| const BasicBlock *BB = *I; | |
| if (BB == HoistPt) { | |
| // Stop traversal when reaching NewHoistPt. | |
| I.skipChildren(); | |
| continue; | |
| } | |
| if (hasEHhelper(BB, SrcBB, NBBsOnAllPaths)) | |
| return true; | |
| // -1 is unlimited number of blocks on all paths. | |
| if (NBBsOnAllPaths != -1) | |
| --NBBsOnAllPaths; | |
| ++I; | |
| } | |
| return false; | |
| } | |
| // Return true when it is safe to hoist a memory load or store U from OldPt | |
| // to NewPt. | |
| bool safeToHoistLdSt(const Instruction *NewPt, const Instruction *OldPt, | |
| MemoryUseOrDef *U, InsKind K, int &NBBsOnAllPaths) { | |
| // In place hoisting is safe. | |
| if (NewPt == OldPt) | |
| return true; | |
| const BasicBlock *NewBB = NewPt->getParent(); | |
| const BasicBlock *OldBB = OldPt->getParent(); | |
| const BasicBlock *UBB = U->getBlock(); | |
| // Check for dependences on the Memory SSA. | |
| MemoryAccess *D = U->getDefiningAccess(); | |
| BasicBlock *DBB = D->getBlock(); | |
| if (DT->properlyDominates(NewBB, DBB)) | |
| // Cannot move the load or store to NewBB above its definition in DBB. | |
| return false; | |
| if (NewBB == DBB && !MSSA->isLiveOnEntryDef(D)) | |
| if (auto *UD = dyn_cast<MemoryUseOrDef>(D)) | |
| if (!firstInBB(UD->getMemoryInst(), NewPt)) | |
| // Cannot move the load or store to NewPt above its definition in D. | |
| return false; | |
| // Check for unsafe hoistings due to side effects. | |
| if (K == InsKind::Store) { | |
| if (hasEHOrLoadsOnPath(NewPt, dyn_cast<MemoryDef>(U), NBBsOnAllPaths)) | |
| return false; | |
| } else if (hasEHOnPath(NewBB, OldBB, NBBsOnAllPaths)) | |
| return false; | |
| if (UBB == NewBB) { | |
| if (DT->properlyDominates(DBB, NewBB)) | |
| return true; | |
| assert(UBB == DBB); | |
| assert(MSSA->locallyDominates(D, U)); | |
| } | |
| // No side effects: it is safe to hoist. | |
| return true; | |
| } | |
| // Return true when it is safe to hoist scalar instructions from all blocks in | |
| // WL to HoistBB. | |
| bool safeToHoistScalar(const BasicBlock *HoistBB, const BasicBlock *BB, | |
| int &NBBsOnAllPaths) { | |
| return !hasEHOnPath(HoistBB, BB, NBBsOnAllPaths); | |
| } | |
| // In the inverse CFG, the dominance frontier of basic block (BB) is the | |
| // point where ANTIC needs to be computed for instructions which are going | |
| // to be hoisted. Since this point does not change during gvn-hoist, | |
| // we compute it only once (on demand). | |
| // The ides is inspired from: | |
| // "Partial Redundancy Elimination in SSA Form" | |
| // ROBERT KENNEDY, SUN CHAN, SHIN-MING LIU, RAYMOND LO, PENG TU and FRED CHOW | |
| // They use similar idea in the forward graph to find fully redundant and | |
| // partially redundant expressions, here it is used in the inverse graph to | |
| // find fully anticipable instructions at merge point (post-dominator in | |
| // the inverse CFG). | |
| // Returns the edge via which an instruction in BB will get the values from. | |
| // Returns true when the values are flowing out to each edge. | |
| bool valueAnticipable(CHIArgs C, TerminatorInst *TI) const { | |
| if (TI->getNumSuccessors() > (unsigned)size(C)) | |
| return false; // Not enough args in this CHI. | |
| for (auto CHI : C) { | |
| BasicBlock *Dest = CHI.Dest; | |
| // Find if all the edges have values flowing out of BB. | |
| bool Found = llvm::any_of(TI->successors(), [Dest](const BasicBlock *BB) { | |
| return BB == Dest; }); | |
| if (!Found) | |
| return false; | |
| } | |
| return true; | |
| } | |
| // Check if it is safe to hoist values tracked by CHI in the range | |
| // [Begin, End) and accumulate them in Safe. | |
| void checkSafety(CHIArgs C, BasicBlock *BB, InsKind K, | |
| SmallVectorImpl<CHIArg> &Safe) { | |
| int NumBBsOnAllPaths = MaxNumberOfBBSInPath; | |
| for (auto CHI : C) { | |
| Instruction *Insn = CHI.I; | |
| if (!Insn) // No instruction was inserted in this CHI. | |
| continue; | |
| if (K == InsKind::Scalar) { | |
| if (safeToHoistScalar(BB, Insn->getParent(), NumBBsOnAllPaths)) | |
| Safe.push_back(CHI); | |
| } else { | |
| MemoryUseOrDef *UD = MSSA->getMemoryAccess(Insn); | |
| if (safeToHoistLdSt(BB->getTerminator(), Insn, UD, K, NumBBsOnAllPaths)) | |
| Safe.push_back(CHI); | |
| } | |
| } | |
| } | |
| using RenameStackType = DenseMap<VNType, SmallVector<Instruction *, 2>>; | |
| // Push all the VNs corresponding to BB into RenameStack. | |
| void fillRenameStack(BasicBlock *BB, InValuesType &ValueBBs, | |
| RenameStackType &RenameStack) { | |
| auto it1 = ValueBBs.find(BB); | |
| if (it1 != ValueBBs.end()) { | |
| // Iterate in reverse order to keep lower ranked values on the top. | |
| for (std::pair<VNType, Instruction *> &VI : reverse(it1->second)) { | |
| // Get the value of instruction I | |
| LLVM_DEBUG(dbgs() << "\nPushing on stack: " << *VI.second); | |
| RenameStack[VI.first].push_back(VI.second); | |
| } | |
| } | |
| } | |
| void fillChiArgs(BasicBlock *BB, OutValuesType &CHIBBs, | |
| RenameStackType &RenameStack) { | |
| // For each *predecessor* (because Post-DOM) of BB check if it has a CHI | |
| for (auto Pred : predecessors(BB)) { | |
| auto P = CHIBBs.find(Pred); | |
| if (P == CHIBBs.end()) { | |
| continue; | |
| } | |
| LLVM_DEBUG(dbgs() << "\nLooking at CHIs in: " << Pred->getName();); | |
| // A CHI is found (BB -> Pred is an edge in the CFG) | |
| // Pop the stack until Top(V) = Ve. | |
| auto &VCHI = P->second; | |
| for (auto It = VCHI.begin(), E = VCHI.end(); It != E;) { | |
| CHIArg &C = *It; | |
| if (!C.Dest) { | |
| auto si = RenameStack.find(C.VN); | |
| // The Basic Block where CHI is must dominate the value we want to | |
| // track in a CHI. In the PDom walk, there can be values in the | |
| // stack which are not control dependent e.g., nested loop. | |
| if (si != RenameStack.end() && si->second.size() && | |
| DT->properlyDominates(Pred, si->second.back()->getParent())) { | |
| C.Dest = BB; // Assign the edge | |
| C.I = si->second.pop_back_val(); // Assign the argument | |
| LLVM_DEBUG(dbgs() | |
| << "\nCHI Inserted in BB: " << C.Dest->getName() << *C.I | |
| << ", VN: " << C.VN.first << ", " << C.VN.second); | |
| } | |
| // Move to next CHI of a different value | |
| It = std::find_if(It, VCHI.end(), | |
| [It](CHIArg &A) { return A != *It; }); | |
| } else | |
| ++It; | |
| } | |
| } | |
| } | |
| // Walk the post-dominator tree top-down and use a stack for each value to | |
| // store the last value you see. When you hit a CHI from a given edge, the | |
| // value to use as the argument is at the top of the stack, add the value to | |
| // CHI and pop. | |
| void insertCHI(InValuesType &ValueBBs, OutValuesType &CHIBBs) { | |
| auto Root = PDT->getNode(nullptr); | |
| if (!Root) | |
| return; | |
| // Depth first walk on PDom tree to fill the CHIargs at each PDF. | |
| RenameStackType RenameStack; | |
| for (auto Node : depth_first(Root)) { | |
| BasicBlock *BB = Node->getBlock(); | |
| if (!BB) | |
| continue; | |
| // Collect all values in BB and push to stack. | |
| fillRenameStack(BB, ValueBBs, RenameStack); | |
| // Fill outgoing values in each CHI corresponding to BB. | |
| fillChiArgs(BB, CHIBBs, RenameStack); | |
| } | |
| } | |
| // Walk all the CHI-nodes to find ones which have a empty-entry and remove | |
| // them Then collect all the instructions which are safe to hoist and see if | |
| // they form a list of anticipable values. OutValues contains CHIs | |
| // corresponding to each basic block. | |
| void findHoistableCandidates(OutValuesType &CHIBBs, InsKind K, | |
| HoistingPointList &HPL) { | |
| auto cmpVN = [](const CHIArg &A, const CHIArg &B) { return A.VN < B.VN; }; | |
| // CHIArgs now have the outgoing values, so check for anticipability and | |
| // accumulate hoistable candidates in HPL. | |
| for (std::pair<BasicBlock *, SmallVector<CHIArg, 2>> &A : CHIBBs) { | |
| BasicBlock *BB = A.first; | |
| SmallVectorImpl<CHIArg> &CHIs = A.second; | |
| // Vector of PHIs contains PHIs for different instructions. | |
| // Sort the args according to their VNs, such that identical | |
| // instructions are together. | |
| std::stable_sort(CHIs.begin(), CHIs.end(), cmpVN); | |
| auto TI = BB->getTerminator(); | |
| auto B = CHIs.begin(); | |
| // [PreIt, PHIIt) form a range of CHIs which have identical VNs. | |
| auto PHIIt = std::find_if(CHIs.begin(), CHIs.end(), | |
| [B](CHIArg &A) { return A != *B; }); | |
| auto PrevIt = CHIs.begin(); | |
| while (PrevIt != PHIIt) { | |
| // Collect values which satisfy safety checks. | |
| SmallVector<CHIArg, 2> Safe; | |
| // We check for safety first because there might be multiple values in | |
| // the same path, some of which are not safe to be hoisted, but overall | |
| // each edge has at least one value which can be hoisted, making the | |
| // value anticipable along that path. | |
| checkSafety(make_range(PrevIt, PHIIt), BB, K, Safe); | |
| // List of safe values should be anticipable at TI. | |
| if (valueAnticipable(make_range(Safe.begin(), Safe.end()), TI)) { | |
| HPL.push_back({BB, SmallVecInsn()}); | |
| SmallVecInsn &V = HPL.back().second; | |
| for (auto B : Safe) | |
| V.push_back(B.I); | |
| } | |
| // Check other VNs | |
| PrevIt = PHIIt; | |
| PHIIt = std::find_if(PrevIt, CHIs.end(), | |
| [PrevIt](CHIArg &A) { return A != *PrevIt; }); | |
| } | |
| } | |
| } | |
| // Compute insertion points for each values which can be fully anticipated at | |
| // a dominator. HPL contains all such values. | |
| void computeInsertionPoints(const VNtoInsns &Map, HoistingPointList &HPL, | |
| InsKind K) { | |
| // Sort VNs based on their rankings | |
| std::vector<VNType> Ranks; | |
| for (const auto &Entry : Map) { | |
| Ranks.push_back(Entry.first); | |
| } | |
| // TODO: Remove fully-redundant expressions. | |
| // Get instruction from the Map, assume that all the Instructions | |
| // with same VNs have same rank (this is an approximation). | |
| llvm::sort(Ranks.begin(), Ranks.end(), | |
| [this, &Map](const VNType &r1, const VNType &r2) { | |
| return (rank(*Map.lookup(r1).begin()) < | |
| rank(*Map.lookup(r2).begin())); | |
| }); | |
| // - Sort VNs according to their rank, and start with lowest ranked VN | |
| // - Take a VN and for each instruction with same VN | |
| // - Find the dominance frontier in the inverse graph (PDF) | |
| // - Insert the chi-node at PDF | |
| // - Remove the chi-nodes with missing entries | |
| // - Remove values from CHI-nodes which do not truly flow out, e.g., | |
| // modified along the path. | |
| // - Collect the remaining values that are still anticipable | |
| SmallVector<BasicBlock *, 2> IDFBlocks; | |
| ReverseIDFCalculator IDFs(*PDT); | |
| OutValuesType OutValue; | |
| InValuesType InValue; | |
| for (const auto &R : Ranks) { | |
| const SmallVecInsn &V = Map.lookup(R); | |
| if (V.size() < 2) | |
| continue; | |
| const VNType &VN = R; | |
| SmallPtrSet<BasicBlock *, 2> VNBlocks; | |
| for (auto &I : V) { | |
| BasicBlock *BBI = I->getParent(); | |
| if (!hasEH(BBI)) | |
| VNBlocks.insert(BBI); | |
| } | |
| // Compute the Post Dominance Frontiers of each basic block | |
| // The dominance frontier of a live block X in the reverse | |
| // control graph is the set of blocks upon which X is control | |
| // dependent. The following sequence computes the set of blocks | |
| // which currently have dead terminators that are control | |
| // dependence sources of a block which is in NewLiveBlocks. | |
| IDFs.setDefiningBlocks(VNBlocks); | |
| IDFs.calculate(IDFBlocks); | |
| // Make a map of BB vs instructions to be hoisted. | |
| for (unsigned i = 0; i < V.size(); ++i) { | |
| InValue[V[i]->getParent()].push_back(std::make_pair(VN, V[i])); | |
| } | |
| // Insert empty CHI node for this VN. This is used to factor out | |
| // basic blocks where the ANTIC can potentially change. | |
| for (auto IDFB : IDFBlocks) { // TODO: Prune out useless CHI insertions. | |
| for (unsigned i = 0; i < V.size(); ++i) { | |
| CHIArg C = {VN, nullptr, nullptr}; | |
| // Ignore spurious PDFs. | |
| if (DT->properlyDominates(IDFB, V[i]->getParent())) { | |
| OutValue[IDFB].push_back(C); | |
| LLVM_DEBUG(dbgs() << "\nInsertion a CHI for BB: " << IDFB->getName() | |
| << ", for Insn: " << *V[i]); | |
| } | |
| } | |
| } | |
| } | |
| // Insert CHI args at each PDF to iterate on factored graph of | |
| // control dependence. | |
| insertCHI(InValue, OutValue); | |
| // Using the CHI args inserted at each PDF, find fully anticipable values. | |
| findHoistableCandidates(OutValue, K, HPL); | |
| } | |
| // Return true when all operands of Instr are available at insertion point | |
| // HoistPt. When limiting the number of hoisted expressions, one could hoist | |
| // a load without hoisting its access function. So before hoisting any | |
| // expression, make sure that all its operands are available at insert point. | |
| bool allOperandsAvailable(const Instruction *I, | |
| const BasicBlock *HoistPt) const { | |
| for (const Use &Op : I->operands()) | |
| if (const auto *Inst = dyn_cast<Instruction>(&Op)) | |
| if (!DT->dominates(Inst->getParent(), HoistPt)) | |
| return false; | |
| return true; | |
| } | |
| // Same as allOperandsAvailable with recursive check for GEP operands. | |
| bool allGepOperandsAvailable(const Instruction *I, | |
| const BasicBlock *HoistPt) const { | |
| for (const Use &Op : I->operands()) | |
| if (const auto *Inst = dyn_cast<Instruction>(&Op)) | |
| if (!DT->dominates(Inst->getParent(), HoistPt)) { | |
| if (const GetElementPtrInst *GepOp = | |
| dyn_cast<GetElementPtrInst>(Inst)) { | |
| if (!allGepOperandsAvailable(GepOp, HoistPt)) | |
| return false; | |
| // Gep is available if all operands of GepOp are available. | |
| } else { | |
| // Gep is not available if it has operands other than GEPs that are | |
| // defined in blocks not dominating HoistPt. | |
| return false; | |
| } | |
| } | |
| return true; | |
| } | |
| // Make all operands of the GEP available. | |
| void makeGepsAvailable(Instruction *Repl, BasicBlock *HoistPt, | |
| const SmallVecInsn &InstructionsToHoist, | |
| Instruction *Gep) const { | |
| assert(allGepOperandsAvailable(Gep, HoistPt) && | |
| "GEP operands not available"); | |
| Instruction *ClonedGep = Gep->clone(); | |
| for (unsigned i = 0, e = Gep->getNumOperands(); i != e; ++i) | |
| if (Instruction *Op = dyn_cast<Instruction>(Gep->getOperand(i))) { | |
| // Check whether the operand is already available. | |
| if (DT->dominates(Op->getParent(), HoistPt)) | |
| continue; | |
| // As a GEP can refer to other GEPs, recursively make all the operands | |
| // of this GEP available at HoistPt. | |
| if (GetElementPtrInst *GepOp = dyn_cast<GetElementPtrInst>(Op)) | |
| makeGepsAvailable(ClonedGep, HoistPt, InstructionsToHoist, GepOp); | |
| } | |
| // Copy Gep and replace its uses in Repl with ClonedGep. | |
| ClonedGep->insertBefore(HoistPt->getTerminator()); | |
| // Conservatively discard any optimization hints, they may differ on the | |
| // other paths. | |
| ClonedGep->dropUnknownNonDebugMetadata(); | |
| // If we have optimization hints which agree with each other along different | |
| // paths, preserve them. | |
| for (const Instruction *OtherInst : InstructionsToHoist) { | |
| const GetElementPtrInst *OtherGep; | |
| if (auto *OtherLd = dyn_cast<LoadInst>(OtherInst)) | |
| OtherGep = cast<GetElementPtrInst>(OtherLd->getPointerOperand()); | |
| else | |
| OtherGep = cast<GetElementPtrInst>( | |
| cast<StoreInst>(OtherInst)->getPointerOperand()); | |
| ClonedGep->andIRFlags(OtherGep); | |
| } | |
| // Replace uses of Gep with ClonedGep in Repl. | |
| Repl->replaceUsesOfWith(Gep, ClonedGep); | |
| } | |
| void updateAlignment(Instruction *I, Instruction *Repl) { | |
| if (auto *ReplacementLoad = dyn_cast<LoadInst>(Repl)) { | |
| ReplacementLoad->setAlignment( | |
| std::min(ReplacementLoad->getAlignment(), | |
| cast<LoadInst>(I)->getAlignment())); | |
| ++NumLoadsRemoved; | |
| } else if (auto *ReplacementStore = dyn_cast<StoreInst>(Repl)) { | |
| ReplacementStore->setAlignment( | |
| std::min(ReplacementStore->getAlignment(), | |
| cast<StoreInst>(I)->getAlignment())); | |
| ++NumStoresRemoved; | |
| } else if (auto *ReplacementAlloca = dyn_cast<AllocaInst>(Repl)) { | |
| ReplacementAlloca->setAlignment( | |
| std::max(ReplacementAlloca->getAlignment(), | |
| cast<AllocaInst>(I)->getAlignment())); | |
| } else if (isa<CallInst>(Repl)) { | |
| ++NumCallsRemoved; | |
| } | |
| } | |
| // Remove all the instructions in Candidates and replace their usage with Repl. | |
| // Returns the number of instructions removed. | |
| unsigned rauw(const SmallVecInsn &Candidates, Instruction *Repl, | |
| MemoryUseOrDef *NewMemAcc) { | |
| unsigned NR = 0; | |
| for (Instruction *I : Candidates) { | |
| if (I != Repl) { | |
| ++NR; | |
| updateAlignment(I, Repl); | |
| if (NewMemAcc) { | |
| // Update the uses of the old MSSA access with NewMemAcc. | |
| MemoryAccess *OldMA = MSSA->getMemoryAccess(I); | |
| OldMA->replaceAllUsesWith(NewMemAcc); | |
| MSSAUpdater->removeMemoryAccess(OldMA); | |
| } | |
| Repl->andIRFlags(I); | |
| combineKnownMetadata(Repl, I); | |
| I->replaceAllUsesWith(Repl); | |
| // Also invalidate the Alias Analysis cache. | |
| MD->removeInstruction(I); | |
| I->eraseFromParent(); | |
| } | |
| } | |
| return NR; | |
| } | |
| // Replace all Memory PHI usage with NewMemAcc. | |
| void raMPHIuw(MemoryUseOrDef *NewMemAcc) { | |
| SmallPtrSet<MemoryPhi *, 4> UsePhis; | |
| for (User *U : NewMemAcc->users()) | |
| if (MemoryPhi *Phi = dyn_cast<MemoryPhi>(U)) | |
| UsePhis.insert(Phi); | |
| for (MemoryPhi *Phi : UsePhis) { | |
| auto In = Phi->incoming_values(); | |
| if (llvm::all_of(In, [&](Use &U) { return U == NewMemAcc; })) { | |
| Phi->replaceAllUsesWith(NewMemAcc); | |
| MSSAUpdater->removeMemoryAccess(Phi); | |
| } | |
| } | |
| } | |
| // Remove all other instructions and replace them with Repl. | |
| unsigned removeAndReplace(const SmallVecInsn &Candidates, Instruction *Repl, | |
| BasicBlock *DestBB, bool MoveAccess) { | |
| MemoryUseOrDef *NewMemAcc = MSSA->getMemoryAccess(Repl); | |
| if (MoveAccess && NewMemAcc) { | |
| // The definition of this ld/st will not change: ld/st hoisting is | |
| // legal when the ld/st is not moved past its current definition. | |
| MSSAUpdater->moveToPlace(NewMemAcc, DestBB, MemorySSA::End); | |
| } | |
| // Replace all other instructions with Repl with memory access NewMemAcc. | |
| unsigned NR = rauw(Candidates, Repl, NewMemAcc); | |
| // Remove MemorySSA phi nodes with the same arguments. | |
| if (NewMemAcc) | |
| raMPHIuw(NewMemAcc); | |
| return NR; | |
| } | |
| // In the case Repl is a load or a store, we make all their GEPs | |
| // available: GEPs are not hoisted by default to avoid the address | |
| // computations to be hoisted without the associated load or store. | |
| bool makeGepOperandsAvailable(Instruction *Repl, BasicBlock *HoistPt, | |
| const SmallVecInsn &InstructionsToHoist) const { | |
| // Check whether the GEP of a ld/st can be synthesized at HoistPt. | |
| GetElementPtrInst *Gep = nullptr; | |
| Instruction *Val = nullptr; | |
| if (auto *Ld = dyn_cast<LoadInst>(Repl)) { | |
| Gep = dyn_cast<GetElementPtrInst>(Ld->getPointerOperand()); | |
| } else if (auto *St = dyn_cast<StoreInst>(Repl)) { | |
| Gep = dyn_cast<GetElementPtrInst>(St->getPointerOperand()); | |
| Val = dyn_cast<Instruction>(St->getValueOperand()); | |
| // Check that the stored value is available. | |
| if (Val) { | |
| if (isa<GetElementPtrInst>(Val)) { | |
| // Check whether we can compute the GEP at HoistPt. | |
| if (!allGepOperandsAvailable(Val, HoistPt)) | |
| return false; | |
| } else if (!DT->dominates(Val->getParent(), HoistPt)) | |
| return false; | |
| } | |
| } | |
| // Check whether we can compute the Gep at HoistPt. | |
| if (!Gep || !allGepOperandsAvailable(Gep, HoistPt)) | |
| return false; | |
| makeGepsAvailable(Repl, HoistPt, InstructionsToHoist, Gep); | |
| if (Val && isa<GetElementPtrInst>(Val)) | |
| makeGepsAvailable(Repl, HoistPt, InstructionsToHoist, Val); | |
| return true; | |
| } | |
| std::pair<unsigned, unsigned> hoist(HoistingPointList &HPL) { | |
| unsigned NI = 0, NL = 0, NS = 0, NC = 0, NR = 0; | |
| for (const HoistingPointInfo &HP : HPL) { | |
| // Find out whether we already have one of the instructions in HoistPt, | |
| // in which case we do not have to move it. | |
| BasicBlock *DestBB = HP.first; | |
| const SmallVecInsn &InstructionsToHoist = HP.second; | |
| Instruction *Repl = nullptr; | |
| for (Instruction *I : InstructionsToHoist) | |
| if (I->getParent() == DestBB) | |
| // If there are two instructions in HoistPt to be hoisted in place: | |
| // update Repl to be the first one, such that we can rename the uses | |
| // of the second based on the first. | |
| if (!Repl || firstInBB(I, Repl)) | |
| Repl = I; | |
| // Keep track of whether we moved the instruction so we know whether we | |
| // should move the MemoryAccess. | |
| bool MoveAccess = true; | |
| if (Repl) { | |
| // Repl is already in HoistPt: it remains in place. | |
| assert(allOperandsAvailable(Repl, DestBB) && | |
| "instruction depends on operands that are not available"); | |
| MoveAccess = false; | |
| } else { | |
| // When we do not find Repl in HoistPt, select the first in the list | |
| // and move it to HoistPt. | |
| Repl = InstructionsToHoist.front(); | |
| // We can move Repl in HoistPt only when all operands are available. | |
| // The order in which hoistings are done may influence the availability | |
| // of operands. | |
| if (!allOperandsAvailable(Repl, DestBB)) { | |
| // When HoistingGeps there is nothing more we can do to make the | |
| // operands available: just continue. | |
| if (HoistingGeps) | |
| continue; | |
| // When not HoistingGeps we need to copy the GEPs. | |
| if (!makeGepOperandsAvailable(Repl, DestBB, InstructionsToHoist)) | |
| continue; | |
| } | |
| // Move the instruction at the end of HoistPt. | |
| Instruction *Last = DestBB->getTerminator(); | |
| MD->removeInstruction(Repl); | |
| Repl->moveBefore(Last); | |
| DFSNumber[Repl] = DFSNumber[Last]++; | |
| } | |
| NR += removeAndReplace(InstructionsToHoist, Repl, DestBB, MoveAccess); | |
| if (isa<LoadInst>(Repl)) | |
| ++NL; | |
| else if (isa<StoreInst>(Repl)) | |
| ++NS; | |
| else if (isa<CallInst>(Repl)) | |
| ++NC; | |
| else // Scalar | |
| ++NI; | |
| } | |
| NumHoisted += NL + NS + NC + NI; | |
| NumRemoved += NR; | |
| NumLoadsHoisted += NL; | |
| NumStoresHoisted += NS; | |
| NumCallsHoisted += NC; | |
| return {NI, NL + NC + NS}; | |
| } | |
| // Hoist all expressions. Returns Number of scalars hoisted | |
| // and number of non-scalars hoisted. | |
| std::pair<unsigned, unsigned> hoistExpressions(Function &F) { | |
| InsnInfo II; | |
| LoadInfo LI; | |
| StoreInfo SI; | |
| CallInfo CI; | |
| for (BasicBlock *BB : depth_first(&F.getEntryBlock())) { | |
| int InstructionNb = 0; | |
| for (Instruction &I1 : *BB) { | |
| // If I1 cannot guarantee progress, subsequent instructions | |
| // in BB cannot be hoisted anyways. | |
| if (!isGuaranteedToTransferExecutionToSuccessor(&I1)) { | |
| HoistBarrier.insert(BB); | |
| break; | |
| } | |
| // Only hoist the first instructions in BB up to MaxDepthInBB. Hoisting | |
| // deeper may increase the register pressure and compilation time. | |
| if (MaxDepthInBB != -1 && InstructionNb++ >= MaxDepthInBB) | |
| break; | |
| // Do not value number terminator instructions. | |
| if (isa<TerminatorInst>(&I1)) | |
| break; | |
| if (auto *Load = dyn_cast<LoadInst>(&I1)) | |
| LI.insert(Load, VN); | |
| else if (auto *Store = dyn_cast<StoreInst>(&I1)) | |
| SI.insert(Store, VN); | |
| else if (auto *Call = dyn_cast<CallInst>(&I1)) { | |
| if (auto *Intr = dyn_cast<IntrinsicInst>(Call)) { | |
| if (isa<DbgInfoIntrinsic>(Intr) || | |
| Intr->getIntrinsicID() == Intrinsic::assume || | |
| Intr->getIntrinsicID() == Intrinsic::sideeffect) | |
| continue; | |
| } | |
| if (Call->mayHaveSideEffects()) | |
| break; | |
| if (Call->isConvergent()) | |
| break; | |
| CI.insert(Call, VN); | |
| } else if (HoistingGeps || !isa<GetElementPtrInst>(&I1)) | |
| // Do not hoist scalars past calls that may write to memory because | |
| // that could result in spills later. geps are handled separately. | |
| // TODO: We can relax this for targets like AArch64 as they have more | |
| // registers than X86. | |
| II.insert(&I1, VN); | |
| } | |
| } | |
| HoistingPointList HPL; | |
| computeInsertionPoints(II.getVNTable(), HPL, InsKind::Scalar); | |
| computeInsertionPoints(LI.getVNTable(), HPL, InsKind::Load); | |
| computeInsertionPoints(SI.getVNTable(), HPL, InsKind::Store); | |
| computeInsertionPoints(CI.getScalarVNTable(), HPL, InsKind::Scalar); | |
| computeInsertionPoints(CI.getLoadVNTable(), HPL, InsKind::Load); | |
| computeInsertionPoints(CI.getStoreVNTable(), HPL, InsKind::Store); | |
| return hoist(HPL); | |
| } | |
| }; | |
| class GVNHoistLegacyPass : public FunctionPass { | |
| public: | |
| static char ID; | |
| GVNHoistLegacyPass() : FunctionPass(ID) { | |
| initializeGVNHoistLegacyPassPass(*PassRegistry::getPassRegistry()); | |
| } | |
| bool runOnFunction(Function &F) override { | |
| if (skipFunction(F)) | |
| return false; | |
| auto &DT = getAnalysis<DominatorTreeWrapperPass>().getDomTree(); | |
| auto &PDT = getAnalysis<PostDominatorTreeWrapperPass>().getPostDomTree(); | |
| auto &AA = getAnalysis<AAResultsWrapperPass>().getAAResults(); | |
| auto &MD = getAnalysis<MemoryDependenceWrapperPass>().getMemDep(); | |
| auto &MSSA = getAnalysis<MemorySSAWrapperPass>().getMSSA(); | |
| GVNHoist G(&DT, &PDT, &AA, &MD, &MSSA); | |
| return G.run(F); | |
| } | |
| void getAnalysisUsage(AnalysisUsage &AU) const override { | |
| AU.addRequired<DominatorTreeWrapperPass>(); | |
| AU.addRequired<PostDominatorTreeWrapperPass>(); | |
| AU.addRequired<AAResultsWrapperPass>(); | |
| AU.addRequired<MemoryDependenceWrapperPass>(); | |
| AU.addRequired<MemorySSAWrapperPass>(); | |
| AU.addPreserved<DominatorTreeWrapperPass>(); | |
| AU.addPreserved<MemorySSAWrapperPass>(); | |
| AU.addPreserved<GlobalsAAWrapperPass>(); | |
| } | |
| }; | |
| } // end namespace llvm | |
| PreservedAnalyses GVNHoistPass::run(Function &F, FunctionAnalysisManager &AM) { | |
| DominatorTree &DT = AM.getResult<DominatorTreeAnalysis>(F); | |
| PostDominatorTree &PDT = AM.getResult<PostDominatorTreeAnalysis>(F); | |
| AliasAnalysis &AA = AM.getResult<AAManager>(F); | |
| MemoryDependenceResults &MD = AM.getResult<MemoryDependenceAnalysis>(F); | |
| MemorySSA &MSSA = AM.getResult<MemorySSAAnalysis>(F).getMSSA(); | |
| GVNHoist G(&DT, &PDT, &AA, &MD, &MSSA); | |
| if (!G.run(F)) | |
| return PreservedAnalyses::all(); | |
| PreservedAnalyses PA; | |
| PA.preserve<DominatorTreeAnalysis>(); | |
| PA.preserve<MemorySSAAnalysis>(); | |
| PA.preserve<GlobalsAA>(); | |
| return PA; | |
| } | |
| char GVNHoistLegacyPass::ID = 0; | |
| INITIALIZE_PASS_BEGIN(GVNHoistLegacyPass, "gvn-hoist", | |
| "Early GVN Hoisting of Expressions", false, false) | |
| INITIALIZE_PASS_DEPENDENCY(MemoryDependenceWrapperPass) | |
| INITIALIZE_PASS_DEPENDENCY(MemorySSAWrapperPass) | |
| INITIALIZE_PASS_DEPENDENCY(DominatorTreeWrapperPass) | |
| INITIALIZE_PASS_DEPENDENCY(PostDominatorTreeWrapperPass) | |
| INITIALIZE_PASS_DEPENDENCY(AAResultsWrapperPass) | |
| INITIALIZE_PASS_END(GVNHoistLegacyPass, "gvn-hoist", | |
| "Early GVN Hoisting of Expressions", false, false) | |
| FunctionPass *llvm::createGVNHoistPass() { return new GVNHoistLegacyPass(); } |