| //==--- InstrEmitter.cpp - Emit MachineInstrs for the SelectionDAG class ---==// | |
| // | |
| // The LLVM Compiler Infrastructure | |
| // | |
| // This file is distributed under the University of Illinois Open Source | |
| // License. See LICENSE.TXT for details. | |
| // | |
| //===----------------------------------------------------------------------===// | |
| // | |
| // This implements the Emit routines for the SelectionDAG class, which creates | |
| // MachineInstrs based on the decisions of the SelectionDAG instruction | |
| // selection. | |
| // | |
| //===----------------------------------------------------------------------===// | |
| #include "InstrEmitter.h" | |
| #include "SDNodeDbgValue.h" | |
| #include "llvm/ADT/Statistic.h" | |
| #include "llvm/CodeGen/MachineConstantPool.h" | |
| #include "llvm/CodeGen/MachineFunction.h" | |
| #include "llvm/CodeGen/MachineInstrBuilder.h" | |
| #include "llvm/CodeGen/MachineRegisterInfo.h" | |
| #include "llvm/CodeGen/StackMaps.h" | |
| #include "llvm/CodeGen/TargetInstrInfo.h" | |
| #include "llvm/CodeGen/TargetLowering.h" | |
| #include "llvm/CodeGen/TargetSubtargetInfo.h" | |
| #include "llvm/IR/DataLayout.h" | |
| #include "llvm/IR/DebugInfo.h" | |
| #include "llvm/Support/Debug.h" | |
| #include "llvm/Support/ErrorHandling.h" | |
| #include "llvm/Support/MathExtras.h" | |
| using namespace llvm; | |
| #define DEBUG_TYPE "instr-emitter" | |
| /// MinRCSize - Smallest register class we allow when constraining virtual | |
| /// registers. If satisfying all register class constraints would require | |
| /// using a smaller register class, emit a COPY to a new virtual register | |
| /// instead. | |
| const unsigned MinRCSize = 4; | |
| /// CountResults - The results of target nodes have register or immediate | |
| /// operands first, then an optional chain, and optional glue operands (which do | |
| /// not go into the resulting MachineInstr). | |
| unsigned InstrEmitter::CountResults(SDNode *Node) { | |
| unsigned N = Node->getNumValues(); | |
| while (N && Node->getValueType(N - 1) == MVT::Glue) | |
| --N; | |
| if (N && Node->getValueType(N - 1) == MVT::Other) | |
| --N; // Skip over chain result. | |
| return N; | |
| } | |
| /// countOperands - The inputs to target nodes have any actual inputs first, | |
| /// followed by an optional chain operand, then an optional glue operand. | |
| /// Compute the number of actual operands that will go into the resulting | |
| /// MachineInstr. | |
| /// | |
| /// Also count physreg RegisterSDNode and RegisterMaskSDNode operands preceding | |
| /// the chain and glue. These operands may be implicit on the machine instr. | |
| static unsigned countOperands(SDNode *Node, unsigned NumExpUses, | |
| unsigned &NumImpUses) { | |
| unsigned N = Node->getNumOperands(); | |
| while (N && Node->getOperand(N - 1).getValueType() == MVT::Glue) | |
| --N; | |
| if (N && Node->getOperand(N - 1).getValueType() == MVT::Other) | |
| --N; // Ignore chain if it exists. | |
| // Count RegisterSDNode and RegisterMaskSDNode operands for NumImpUses. | |
| NumImpUses = N - NumExpUses; | |
| for (unsigned I = N; I > NumExpUses; --I) { | |
| if (isa<RegisterMaskSDNode>(Node->getOperand(I - 1))) | |
| continue; | |
| if (RegisterSDNode *RN = dyn_cast<RegisterSDNode>(Node->getOperand(I - 1))) | |
| if (TargetRegisterInfo::isPhysicalRegister(RN->getReg())) | |
| continue; | |
| NumImpUses = N - I; | |
| break; | |
| } | |
| return N; | |
| } | |
| /// EmitCopyFromReg - Generate machine code for an CopyFromReg node or an | |
| /// implicit physical register output. | |
| void InstrEmitter:: | |
| EmitCopyFromReg(SDNode *Node, unsigned ResNo, bool IsClone, bool IsCloned, | |
| unsigned SrcReg, DenseMap<SDValue, unsigned> &VRBaseMap) { | |
| unsigned VRBase = 0; | |
| if (TargetRegisterInfo::isVirtualRegister(SrcReg)) { | |
| // Just use the input register directly! | |
| SDValue Op(Node, ResNo); | |
| if (IsClone) | |
| VRBaseMap.erase(Op); | |
| bool isNew = VRBaseMap.insert(std::make_pair(Op, SrcReg)).second; | |
| (void)isNew; // Silence compiler warning. | |
| assert(isNew && "Node emitted out of order - early"); | |
| return; | |
| } | |
| // If the node is only used by a CopyToReg and the dest reg is a vreg, use | |
| // the CopyToReg'd destination register instead of creating a new vreg. | |
| bool MatchReg = true; | |
| const TargetRegisterClass *UseRC = nullptr; | |
| MVT VT = Node->getSimpleValueType(ResNo); | |
| // Stick to the preferred register classes for legal types. | |
| if (TLI->isTypeLegal(VT)) | |
| UseRC = TLI->getRegClassFor(VT); | |
| if (!IsClone && !IsCloned) | |
| for (SDNode *User : Node->uses()) { | |
| bool Match = true; | |
| if (User->getOpcode() == ISD::CopyToReg && | |
| User->getOperand(2).getNode() == Node && | |
| User->getOperand(2).getResNo() == ResNo) { | |
| unsigned DestReg = cast<RegisterSDNode>(User->getOperand(1))->getReg(); | |
| if (TargetRegisterInfo::isVirtualRegister(DestReg)) { | |
| VRBase = DestReg; | |
| Match = false; | |
| } else if (DestReg != SrcReg) | |
| Match = false; | |
| } else { | |
| for (unsigned i = 0, e = User->getNumOperands(); i != e; ++i) { | |
| SDValue Op = User->getOperand(i); | |
| if (Op.getNode() != Node || Op.getResNo() != ResNo) | |
| continue; | |
| MVT VT = Node->getSimpleValueType(Op.getResNo()); | |
| if (VT == MVT::Other || VT == MVT::Glue) | |
| continue; | |
| Match = false; | |
| if (User->isMachineOpcode()) { | |
| const MCInstrDesc &II = TII->get(User->getMachineOpcode()); | |
| const TargetRegisterClass *RC = nullptr; | |
| if (i+II.getNumDefs() < II.getNumOperands()) { | |
| RC = TRI->getAllocatableClass( | |
| TII->getRegClass(II, i+II.getNumDefs(), TRI, *MF)); | |
| } | |
| if (!UseRC) | |
| UseRC = RC; | |
| else if (RC) { | |
| const TargetRegisterClass *ComRC = | |
| TRI->getCommonSubClass(UseRC, RC, VT.SimpleTy); | |
| // If multiple uses expect disjoint register classes, we emit | |
| // copies in AddRegisterOperand. | |
| if (ComRC) | |
| UseRC = ComRC; | |
| } | |
| } | |
| } | |
| } | |
| MatchReg &= Match; | |
| if (VRBase) | |
| break; | |
| } | |
| const TargetRegisterClass *SrcRC = nullptr, *DstRC = nullptr; | |
| SrcRC = TRI->getMinimalPhysRegClass(SrcReg, VT); | |
| // Figure out the register class to create for the destreg. | |
| if (VRBase) { | |
| DstRC = MRI->getRegClass(VRBase); | |
| } else if (UseRC) { | |
| assert(TRI->isTypeLegalForClass(*UseRC, VT) && | |
| "Incompatible phys register def and uses!"); | |
| DstRC = UseRC; | |
| } else { | |
| DstRC = TLI->getRegClassFor(VT); | |
| } | |
| // If all uses are reading from the src physical register and copying the | |
| // register is either impossible or very expensive, then don't create a copy. | |
| if (MatchReg && SrcRC->getCopyCost() < 0) { | |
| VRBase = SrcReg; | |
| } else { | |
| // Create the reg, emit the copy. | |
| VRBase = MRI->createVirtualRegister(DstRC); | |
| BuildMI(*MBB, InsertPos, Node->getDebugLoc(), TII->get(TargetOpcode::COPY), | |
| VRBase).addReg(SrcReg); | |
| } | |
| SDValue Op(Node, ResNo); | |
| if (IsClone) | |
| VRBaseMap.erase(Op); | |
| bool isNew = VRBaseMap.insert(std::make_pair(Op, VRBase)).second; | |
| (void)isNew; // Silence compiler warning. | |
| assert(isNew && "Node emitted out of order - early"); | |
| } | |
| /// getDstOfCopyToRegUse - If the only use of the specified result number of | |
| /// node is a CopyToReg, return its destination register. Return 0 otherwise. | |
| unsigned InstrEmitter::getDstOfOnlyCopyToRegUse(SDNode *Node, | |
| unsigned ResNo) const { | |
| if (!Node->hasOneUse()) | |
| return 0; | |
| SDNode *User = *Node->use_begin(); | |
| if (User->getOpcode() == ISD::CopyToReg && | |
| User->getOperand(2).getNode() == Node && | |
| User->getOperand(2).getResNo() == ResNo) { | |
| unsigned Reg = cast<RegisterSDNode>(User->getOperand(1))->getReg(); | |
| if (TargetRegisterInfo::isVirtualRegister(Reg)) | |
| return Reg; | |
| } | |
| return 0; | |
| } | |
| void InstrEmitter::CreateVirtualRegisters(SDNode *Node, | |
| MachineInstrBuilder &MIB, | |
| const MCInstrDesc &II, | |
| bool IsClone, bool IsCloned, | |
| DenseMap<SDValue, unsigned> &VRBaseMap) { | |
| assert(Node->getMachineOpcode() != TargetOpcode::IMPLICIT_DEF && | |
| "IMPLICIT_DEF should have been handled as a special case elsewhere!"); | |
| unsigned NumResults = CountResults(Node); | |
| for (unsigned i = 0; i < II.getNumDefs(); ++i) { | |
| // If the specific node value is only used by a CopyToReg and the dest reg | |
| // is a vreg in the same register class, use the CopyToReg'd destination | |
| // register instead of creating a new vreg. | |
| unsigned VRBase = 0; | |
| const TargetRegisterClass *RC = | |
| TRI->getAllocatableClass(TII->getRegClass(II, i, TRI, *MF)); | |
| // Always let the value type influence the used register class. The | |
| // constraints on the instruction may be too lax to represent the value | |
| // type correctly. For example, a 64-bit float (X86::FR64) can't live in | |
| // the 32-bit float super-class (X86::FR32). | |
| if (i < NumResults && TLI->isTypeLegal(Node->getSimpleValueType(i))) { | |
| const TargetRegisterClass *VTRC = | |
| TLI->getRegClassFor(Node->getSimpleValueType(i)); | |
| if (RC) | |
| VTRC = TRI->getCommonSubClass(RC, VTRC); | |
| if (VTRC) | |
| RC = VTRC; | |
| } | |
| if (II.OpInfo[i].isOptionalDef()) { | |
| // Optional def must be a physical register. | |
| VRBase = cast<RegisterSDNode>(Node->getOperand(i-NumResults))->getReg(); | |
| assert(TargetRegisterInfo::isPhysicalRegister(VRBase)); | |
| MIB.addReg(VRBase, RegState::Define); | |
| } | |
| if (!VRBase && !IsClone && !IsCloned) | |
| for (SDNode *User : Node->uses()) { | |
| if (User->getOpcode() == ISD::CopyToReg && | |
| User->getOperand(2).getNode() == Node && | |
| User->getOperand(2).getResNo() == i) { | |
| unsigned Reg = cast<RegisterSDNode>(User->getOperand(1))->getReg(); | |
| if (TargetRegisterInfo::isVirtualRegister(Reg)) { | |
| const TargetRegisterClass *RegRC = MRI->getRegClass(Reg); | |
| if (RegRC == RC) { | |
| VRBase = Reg; | |
| MIB.addReg(VRBase, RegState::Define); | |
| break; | |
| } | |
| } | |
| } | |
| } | |
| // Create the result registers for this node and add the result regs to | |
| // the machine instruction. | |
| if (VRBase == 0) { | |
| assert(RC && "Isn't a register operand!"); | |
| VRBase = MRI->createVirtualRegister(RC); | |
| MIB.addReg(VRBase, RegState::Define); | |
| } | |
| // If this def corresponds to a result of the SDNode insert the VRBase into | |
| // the lookup map. | |
| if (i < NumResults) { | |
| SDValue Op(Node, i); | |
| if (IsClone) | |
| VRBaseMap.erase(Op); | |
| bool isNew = VRBaseMap.insert(std::make_pair(Op, VRBase)).second; | |
| (void)isNew; // Silence compiler warning. | |
| assert(isNew && "Node emitted out of order - early"); | |
| } | |
| } | |
| } | |
| /// getVR - Return the virtual register corresponding to the specified result | |
| /// of the specified node. | |
| unsigned InstrEmitter::getVR(SDValue Op, | |
| DenseMap<SDValue, unsigned> &VRBaseMap) { | |
| if (Op.isMachineOpcode() && | |
| Op.getMachineOpcode() == TargetOpcode::IMPLICIT_DEF) { | |
| // Add an IMPLICIT_DEF instruction before every use. | |
| unsigned VReg = getDstOfOnlyCopyToRegUse(Op.getNode(), Op.getResNo()); | |
| // IMPLICIT_DEF can produce any type of result so its MCInstrDesc | |
| // does not include operand register class info. | |
| if (!VReg) { | |
| const TargetRegisterClass *RC = | |
| TLI->getRegClassFor(Op.getSimpleValueType()); | |
| VReg = MRI->createVirtualRegister(RC); | |
| } | |
| BuildMI(*MBB, InsertPos, Op.getDebugLoc(), | |
| TII->get(TargetOpcode::IMPLICIT_DEF), VReg); | |
| return VReg; | |
| } | |
| DenseMap<SDValue, unsigned>::iterator I = VRBaseMap.find(Op); | |
| assert(I != VRBaseMap.end() && "Node emitted out of order - late"); | |
| return I->second; | |
| } | |
| /// AddRegisterOperand - Add the specified register as an operand to the | |
| /// specified machine instr. Insert register copies if the register is | |
| /// not in the required register class. | |
| void | |
| InstrEmitter::AddRegisterOperand(MachineInstrBuilder &MIB, | |
| SDValue Op, | |
| unsigned IIOpNum, | |
| const MCInstrDesc *II, | |
| DenseMap<SDValue, unsigned> &VRBaseMap, | |
| bool IsDebug, bool IsClone, bool IsCloned) { | |
| assert(Op.getValueType() != MVT::Other && | |
| Op.getValueType() != MVT::Glue && | |
| "Chain and glue operands should occur at end of operand list!"); | |
| // Get/emit the operand. | |
| unsigned VReg = getVR(Op, VRBaseMap); | |
| const MCInstrDesc &MCID = MIB->getDesc(); | |
| bool isOptDef = IIOpNum < MCID.getNumOperands() && | |
| MCID.OpInfo[IIOpNum].isOptionalDef(); | |
| // If the instruction requires a register in a different class, create | |
| // a new virtual register and copy the value into it, but first attempt to | |
| // shrink VReg's register class within reason. For example, if VReg == GR32 | |
| // and II requires a GR32_NOSP, just constrain VReg to GR32_NOSP. | |
| if (II) { | |
| const TargetRegisterClass *OpRC = nullptr; | |
| if (IIOpNum < II->getNumOperands()) | |
| OpRC = TII->getRegClass(*II, IIOpNum, TRI, *MF); | |
| if (OpRC) { | |
| const TargetRegisterClass *ConstrainedRC | |
| = MRI->constrainRegClass(VReg, OpRC, MinRCSize); | |
| if (!ConstrainedRC) { | |
| OpRC = TRI->getAllocatableClass(OpRC); | |
| assert(OpRC && "Constraints cannot be fulfilled for allocation"); | |
| unsigned NewVReg = MRI->createVirtualRegister(OpRC); | |
| BuildMI(*MBB, InsertPos, Op.getNode()->getDebugLoc(), | |
| TII->get(TargetOpcode::COPY), NewVReg).addReg(VReg); | |
| VReg = NewVReg; | |
| } else { | |
| assert(ConstrainedRC->isAllocatable() && | |
| "Constraining an allocatable VReg produced an unallocatable class?"); | |
| } | |
| } | |
| } | |
| // If this value has only one use, that use is a kill. This is a | |
| // conservative approximation. InstrEmitter does trivial coalescing | |
| // with CopyFromReg nodes, so don't emit kill flags for them. | |
| // Avoid kill flags on Schedule cloned nodes, since there will be | |
| // multiple uses. | |
| // Tied operands are never killed, so we need to check that. And that | |
| // means we need to determine the index of the operand. | |
| bool isKill = Op.hasOneUse() && | |
| Op.getNode()->getOpcode() != ISD::CopyFromReg && | |
| !IsDebug && | |
| !(IsClone || IsCloned); | |
| if (isKill) { | |
| unsigned Idx = MIB->getNumOperands(); | |
| while (Idx > 0 && | |
| MIB->getOperand(Idx-1).isReg() && | |
| MIB->getOperand(Idx-1).isImplicit()) | |
| --Idx; | |
| bool isTied = MCID.getOperandConstraint(Idx, MCOI::TIED_TO) != -1; | |
| if (isTied) | |
| isKill = false; | |
| } | |
| MIB.addReg(VReg, getDefRegState(isOptDef) | getKillRegState(isKill) | | |
| getDebugRegState(IsDebug)); | |
| } | |
| /// AddOperand - Add the specified operand to the specified machine instr. II | |
| /// specifies the instruction information for the node, and IIOpNum is the | |
| /// operand number (in the II) that we are adding. | |
| void InstrEmitter::AddOperand(MachineInstrBuilder &MIB, | |
| SDValue Op, | |
| unsigned IIOpNum, | |
| const MCInstrDesc *II, | |
| DenseMap<SDValue, unsigned> &VRBaseMap, | |
| bool IsDebug, bool IsClone, bool IsCloned) { | |
| if (Op.isMachineOpcode()) { | |
| AddRegisterOperand(MIB, Op, IIOpNum, II, VRBaseMap, | |
| IsDebug, IsClone, IsCloned); | |
| } else if (ConstantSDNode *C = dyn_cast<ConstantSDNode>(Op)) { | |
| MIB.addImm(C->getSExtValue()); | |
| } else if (ConstantFPSDNode *F = dyn_cast<ConstantFPSDNode>(Op)) { | |
| MIB.addFPImm(F->getConstantFPValue()); | |
| } else if (RegisterSDNode *R = dyn_cast<RegisterSDNode>(Op)) { | |
| unsigned VReg = R->getReg(); | |
| MVT OpVT = Op.getSimpleValueType(); | |
| const TargetRegisterClass *OpRC = | |
| TLI->isTypeLegal(OpVT) ? TLI->getRegClassFor(OpVT) : nullptr; | |
| const TargetRegisterClass *IIRC = | |
| II ? TRI->getAllocatableClass(TII->getRegClass(*II, IIOpNum, TRI, *MF)) | |
| : nullptr; | |
| if (OpRC && IIRC && OpRC != IIRC && | |
| TargetRegisterInfo::isVirtualRegister(VReg)) { | |
| unsigned NewVReg = MRI->createVirtualRegister(IIRC); | |
| BuildMI(*MBB, InsertPos, Op.getNode()->getDebugLoc(), | |
| TII->get(TargetOpcode::COPY), NewVReg).addReg(VReg); | |
| VReg = NewVReg; | |
| } | |
| // Turn additional physreg operands into implicit uses on non-variadic | |
| // instructions. This is used by call and return instructions passing | |
| // arguments in registers. | |
| bool Imp = II && (IIOpNum >= II->getNumOperands() && !II->isVariadic()); | |
| MIB.addReg(VReg, getImplRegState(Imp)); | |
| } else if (RegisterMaskSDNode *RM = dyn_cast<RegisterMaskSDNode>(Op)) { | |
| MIB.addRegMask(RM->getRegMask()); | |
| } else if (GlobalAddressSDNode *TGA = dyn_cast<GlobalAddressSDNode>(Op)) { | |
| MIB.addGlobalAddress(TGA->getGlobal(), TGA->getOffset(), | |
| TGA->getTargetFlags()); | |
| } else if (BasicBlockSDNode *BBNode = dyn_cast<BasicBlockSDNode>(Op)) { | |
| MIB.addMBB(BBNode->getBasicBlock()); | |
| } else if (FrameIndexSDNode *FI = dyn_cast<FrameIndexSDNode>(Op)) { | |
| MIB.addFrameIndex(FI->getIndex()); | |
| } else if (JumpTableSDNode *JT = dyn_cast<JumpTableSDNode>(Op)) { | |
| MIB.addJumpTableIndex(JT->getIndex(), JT->getTargetFlags()); | |
| } else if (ConstantPoolSDNode *CP = dyn_cast<ConstantPoolSDNode>(Op)) { | |
| int Offset = CP->getOffset(); | |
| unsigned Align = CP->getAlignment(); | |
| Type *Type = CP->getType(); | |
| // MachineConstantPool wants an explicit alignment. | |
| if (Align == 0) { | |
| Align = MF->getDataLayout().getPrefTypeAlignment(Type); | |
| if (Align == 0) { | |
| // Alignment of vector types. FIXME! | |
| Align = MF->getDataLayout().getTypeAllocSize(Type); | |
| } | |
| } | |
| unsigned Idx; | |
| MachineConstantPool *MCP = MF->getConstantPool(); | |
| if (CP->isMachineConstantPoolEntry()) | |
| Idx = MCP->getConstantPoolIndex(CP->getMachineCPVal(), Align); | |
| else | |
| Idx = MCP->getConstantPoolIndex(CP->getConstVal(), Align); | |
| MIB.addConstantPoolIndex(Idx, Offset, CP->getTargetFlags()); | |
| } else if (ExternalSymbolSDNode *ES = dyn_cast<ExternalSymbolSDNode>(Op)) { | |
| MIB.addExternalSymbol(ES->getSymbol(), ES->getTargetFlags()); | |
| } else if (auto *SymNode = dyn_cast<MCSymbolSDNode>(Op)) { | |
| MIB.addSym(SymNode->getMCSymbol()); | |
| } else if (BlockAddressSDNode *BA = dyn_cast<BlockAddressSDNode>(Op)) { | |
| MIB.addBlockAddress(BA->getBlockAddress(), | |
| BA->getOffset(), | |
| BA->getTargetFlags()); | |
| } else if (TargetIndexSDNode *TI = dyn_cast<TargetIndexSDNode>(Op)) { | |
| MIB.addTargetIndex(TI->getIndex(), TI->getOffset(), TI->getTargetFlags()); | |
| } else { | |
| assert(Op.getValueType() != MVT::Other && | |
| Op.getValueType() != MVT::Glue && | |
| "Chain and glue operands should occur at end of operand list!"); | |
| AddRegisterOperand(MIB, Op, IIOpNum, II, VRBaseMap, | |
| IsDebug, IsClone, IsCloned); | |
| } | |
| } | |
| unsigned InstrEmitter::ConstrainForSubReg(unsigned VReg, unsigned SubIdx, | |
| MVT VT, const DebugLoc &DL) { | |
| const TargetRegisterClass *VRC = MRI->getRegClass(VReg); | |
| const TargetRegisterClass *RC = TRI->getSubClassWithSubReg(VRC, SubIdx); | |
| // RC is a sub-class of VRC that supports SubIdx. Try to constrain VReg | |
| // within reason. | |
| if (RC && RC != VRC) | |
| RC = MRI->constrainRegClass(VReg, RC, MinRCSize); | |
| // VReg has been adjusted. It can be used with SubIdx operands now. | |
| if (RC) | |
| return VReg; | |
| // VReg couldn't be reasonably constrained. Emit a COPY to a new virtual | |
| // register instead. | |
| RC = TRI->getSubClassWithSubReg(TLI->getRegClassFor(VT), SubIdx); | |
| assert(RC && "No legal register class for VT supports that SubIdx"); | |
| unsigned NewReg = MRI->createVirtualRegister(RC); | |
| BuildMI(*MBB, InsertPos, DL, TII->get(TargetOpcode::COPY), NewReg) | |
| .addReg(VReg); | |
| return NewReg; | |
| } | |
| /// EmitSubregNode - Generate machine code for subreg nodes. | |
| /// | |
| void InstrEmitter::EmitSubregNode(SDNode *Node, | |
| DenseMap<SDValue, unsigned> &VRBaseMap, | |
| bool IsClone, bool IsCloned) { | |
| unsigned VRBase = 0; | |
| unsigned Opc = Node->getMachineOpcode(); | |
| // If the node is only used by a CopyToReg and the dest reg is a vreg, use | |
| // the CopyToReg'd destination register instead of creating a new vreg. | |
| for (SDNode *User : Node->uses()) { | |
| if (User->getOpcode() == ISD::CopyToReg && | |
| User->getOperand(2).getNode() == Node) { | |
| unsigned DestReg = cast<RegisterSDNode>(User->getOperand(1))->getReg(); | |
| if (TargetRegisterInfo::isVirtualRegister(DestReg)) { | |
| VRBase = DestReg; | |
| break; | |
| } | |
| } | |
| } | |
| if (Opc == TargetOpcode::EXTRACT_SUBREG) { | |
| // EXTRACT_SUBREG is lowered as %dst = COPY %src:sub. There are no | |
| // constraints on the %dst register, COPY can target all legal register | |
| // classes. | |
| unsigned SubIdx = cast<ConstantSDNode>(Node->getOperand(1))->getZExtValue(); | |
| const TargetRegisterClass *TRC = | |
| TLI->getRegClassFor(Node->getSimpleValueType(0)); | |
| unsigned Reg; | |
| MachineInstr *DefMI; | |
| RegisterSDNode *R = dyn_cast<RegisterSDNode>(Node->getOperand(0)); | |
| if (R && TargetRegisterInfo::isPhysicalRegister(R->getReg())) { | |
| Reg = R->getReg(); | |
| DefMI = nullptr; | |
| } else { | |
| Reg = getVR(Node->getOperand(0), VRBaseMap); | |
| DefMI = MRI->getVRegDef(Reg); | |
| } | |
| unsigned SrcReg, DstReg, DefSubIdx; | |
| if (DefMI && | |
| TII->isCoalescableExtInstr(*DefMI, SrcReg, DstReg, DefSubIdx) && | |
| SubIdx == DefSubIdx && | |
| TRC == MRI->getRegClass(SrcReg)) { | |
| // Optimize these: | |
| // r1025 = s/zext r1024, 4 | |
| // r1026 = extract_subreg r1025, 4 | |
| // to a copy | |
| // r1026 = copy r1024 | |
| VRBase = MRI->createVirtualRegister(TRC); | |
| BuildMI(*MBB, InsertPos, Node->getDebugLoc(), | |
| TII->get(TargetOpcode::COPY), VRBase).addReg(SrcReg); | |
| MRI->clearKillFlags(SrcReg); | |
| } else { | |
| // Reg may not support a SubIdx sub-register, and we may need to | |
| // constrain its register class or issue a COPY to a compatible register | |
| // class. | |
| if (TargetRegisterInfo::isVirtualRegister(Reg)) | |
| Reg = ConstrainForSubReg(Reg, SubIdx, | |
| Node->getOperand(0).getSimpleValueType(), | |
| Node->getDebugLoc()); | |
| // Create the destreg if it is missing. | |
| if (VRBase == 0) | |
| VRBase = MRI->createVirtualRegister(TRC); | |
| // Create the extract_subreg machine instruction. | |
| MachineInstrBuilder CopyMI = | |
| BuildMI(*MBB, InsertPos, Node->getDebugLoc(), | |
| TII->get(TargetOpcode::COPY), VRBase); | |
| if (TargetRegisterInfo::isVirtualRegister(Reg)) | |
| CopyMI.addReg(Reg, 0, SubIdx); | |
| else | |
| CopyMI.addReg(TRI->getSubReg(Reg, SubIdx)); | |
| } | |
| } else if (Opc == TargetOpcode::INSERT_SUBREG || | |
| Opc == TargetOpcode::SUBREG_TO_REG) { | |
| SDValue N0 = Node->getOperand(0); | |
| SDValue N1 = Node->getOperand(1); | |
| SDValue N2 = Node->getOperand(2); | |
| unsigned SubIdx = cast<ConstantSDNode>(N2)->getZExtValue(); | |
| // Figure out the register class to create for the destreg. It should be | |
| // the largest legal register class supporting SubIdx sub-registers. | |
| // RegisterCoalescer will constrain it further if it decides to eliminate | |
| // the INSERT_SUBREG instruction. | |
| // | |
| // %dst = INSERT_SUBREG %src, %sub, SubIdx | |
| // | |
| // is lowered by TwoAddressInstructionPass to: | |
| // | |
| // %dst = COPY %src | |
| // %dst:SubIdx = COPY %sub | |
| // | |
| // There is no constraint on the %src register class. | |
| // | |
| const TargetRegisterClass *SRC = TLI->getRegClassFor(Node->getSimpleValueType(0)); | |
| SRC = TRI->getSubClassWithSubReg(SRC, SubIdx); | |
| assert(SRC && "No register class supports VT and SubIdx for INSERT_SUBREG"); | |
| if (VRBase == 0 || !SRC->hasSubClassEq(MRI->getRegClass(VRBase))) | |
| VRBase = MRI->createVirtualRegister(SRC); | |
| // Create the insert_subreg or subreg_to_reg machine instruction. | |
| MachineInstrBuilder MIB = | |
| BuildMI(*MF, Node->getDebugLoc(), TII->get(Opc), VRBase); | |
| // If creating a subreg_to_reg, then the first input operand | |
| // is an implicit value immediate, otherwise it's a register | |
| if (Opc == TargetOpcode::SUBREG_TO_REG) { | |
| const ConstantSDNode *SD = cast<ConstantSDNode>(N0); | |
| MIB.addImm(SD->getZExtValue()); | |
| } else | |
| AddOperand(MIB, N0, 0, nullptr, VRBaseMap, /*IsDebug=*/false, | |
| IsClone, IsCloned); | |
| // Add the subregister being inserted | |
| AddOperand(MIB, N1, 0, nullptr, VRBaseMap, /*IsDebug=*/false, | |
| IsClone, IsCloned); | |
| MIB.addImm(SubIdx); | |
| MBB->insert(InsertPos, MIB); | |
| } else | |
| llvm_unreachable("Node is not insert_subreg, extract_subreg, or subreg_to_reg"); | |
| SDValue Op(Node, 0); | |
| bool isNew = VRBaseMap.insert(std::make_pair(Op, VRBase)).second; | |
| (void)isNew; // Silence compiler warning. | |
| assert(isNew && "Node emitted out of order - early"); | |
| } | |
| /// EmitCopyToRegClassNode - Generate machine code for COPY_TO_REGCLASS nodes. | |
| /// COPY_TO_REGCLASS is just a normal copy, except that the destination | |
| /// register is constrained to be in a particular register class. | |
| /// | |
| void | |
| InstrEmitter::EmitCopyToRegClassNode(SDNode *Node, | |
| DenseMap<SDValue, unsigned> &VRBaseMap) { | |
| unsigned VReg = getVR(Node->getOperand(0), VRBaseMap); | |
| // Create the new VReg in the destination class and emit a copy. | |
| unsigned DstRCIdx = cast<ConstantSDNode>(Node->getOperand(1))->getZExtValue(); | |
| const TargetRegisterClass *DstRC = | |
| TRI->getAllocatableClass(TRI->getRegClass(DstRCIdx)); | |
| unsigned NewVReg = MRI->createVirtualRegister(DstRC); | |
| BuildMI(*MBB, InsertPos, Node->getDebugLoc(), TII->get(TargetOpcode::COPY), | |
| NewVReg).addReg(VReg); | |
| SDValue Op(Node, 0); | |
| bool isNew = VRBaseMap.insert(std::make_pair(Op, NewVReg)).second; | |
| (void)isNew; // Silence compiler warning. | |
| assert(isNew && "Node emitted out of order - early"); | |
| } | |
| /// EmitRegSequence - Generate machine code for REG_SEQUENCE nodes. | |
| /// | |
| void InstrEmitter::EmitRegSequence(SDNode *Node, | |
| DenseMap<SDValue, unsigned> &VRBaseMap, | |
| bool IsClone, bool IsCloned) { | |
| unsigned DstRCIdx = cast<ConstantSDNode>(Node->getOperand(0))->getZExtValue(); | |
| const TargetRegisterClass *RC = TRI->getRegClass(DstRCIdx); | |
| unsigned NewVReg = MRI->createVirtualRegister(TRI->getAllocatableClass(RC)); | |
| const MCInstrDesc &II = TII->get(TargetOpcode::REG_SEQUENCE); | |
| MachineInstrBuilder MIB = BuildMI(*MF, Node->getDebugLoc(), II, NewVReg); | |
| unsigned NumOps = Node->getNumOperands(); | |
| assert((NumOps & 1) == 1 && | |
| "REG_SEQUENCE must have an odd number of operands!"); | |
| for (unsigned i = 1; i != NumOps; ++i) { | |
| SDValue Op = Node->getOperand(i); | |
| if ((i & 1) == 0) { | |
| RegisterSDNode *R = dyn_cast<RegisterSDNode>(Node->getOperand(i-1)); | |
| // Skip physical registers as they don't have a vreg to get and we'll | |
| // insert copies for them in TwoAddressInstructionPass anyway. | |
| if (!R || !TargetRegisterInfo::isPhysicalRegister(R->getReg())) { | |
| unsigned SubIdx = cast<ConstantSDNode>(Op)->getZExtValue(); | |
| unsigned SubReg = getVR(Node->getOperand(i-1), VRBaseMap); | |
| const TargetRegisterClass *TRC = MRI->getRegClass(SubReg); | |
| const TargetRegisterClass *SRC = | |
| TRI->getMatchingSuperRegClass(RC, TRC, SubIdx); | |
| if (SRC && SRC != RC) { | |
| MRI->setRegClass(NewVReg, SRC); | |
| RC = SRC; | |
| } | |
| } | |
| } | |
| AddOperand(MIB, Op, i+1, &II, VRBaseMap, /*IsDebug=*/false, | |
| IsClone, IsCloned); | |
| } | |
| MBB->insert(InsertPos, MIB); | |
| SDValue Op(Node, 0); | |
| bool isNew = VRBaseMap.insert(std::make_pair(Op, NewVReg)).second; | |
| (void)isNew; // Silence compiler warning. | |
| assert(isNew && "Node emitted out of order - early"); | |
| } | |
| /// EmitDbgValue - Generate machine instruction for a dbg_value node. | |
| /// | |
| MachineInstr * | |
| InstrEmitter::EmitDbgValue(SDDbgValue *SD, | |
| DenseMap<SDValue, unsigned> &VRBaseMap) { | |
| MDNode *Var = SD->getVariable(); | |
| MDNode *Expr = SD->getExpression(); | |
| DebugLoc DL = SD->getDebugLoc(); | |
| assert(cast<DILocalVariable>(Var)->isValidLocationForIntrinsic(DL) && | |
| "Expected inlined-at fields to agree"); | |
| if (SD->getKind() == SDDbgValue::FRAMEIX) { | |
| // Stack address; this needs to be lowered in target-dependent fashion. | |
| // EmitTargetCodeForFrameDebugValue is responsible for allocation. | |
| auto FrameMI = BuildMI(*MF, DL, TII->get(TargetOpcode::DBG_VALUE)) | |
| .addFrameIndex(SD->getFrameIx()); | |
| if (SD->isIndirect()) | |
| // Push [fi + 0] onto the DIExpression stack. | |
| FrameMI.addImm(0); | |
| else | |
| // Push fi onto the DIExpression stack. | |
| FrameMI.addReg(0); | |
| return FrameMI.addMetadata(Var).addMetadata(Expr); | |
| } | |
| // Otherwise, we're going to create an instruction here. | |
| const MCInstrDesc &II = TII->get(TargetOpcode::DBG_VALUE); | |
| MachineInstrBuilder MIB = BuildMI(*MF, DL, II); | |
| if (SD->getKind() == SDDbgValue::SDNODE) { | |
| SDNode *Node = SD->getSDNode(); | |
| SDValue Op = SDValue(Node, SD->getResNo()); | |
| // It's possible we replaced this SDNode with other(s) and therefore | |
| // didn't generate code for it. It's better to catch these cases where | |
| // they happen and transfer the debug info, but trying to guarantee that | |
| // in all cases would be very fragile; this is a safeguard for any | |
| // that were missed. | |
| DenseMap<SDValue, unsigned>::iterator I = VRBaseMap.find(Op); | |
| if (I==VRBaseMap.end()) | |
| MIB.addReg(0U); // undef | |
| else | |
| AddOperand(MIB, Op, (*MIB).getNumOperands(), &II, VRBaseMap, | |
| /*IsDebug=*/true, /*IsClone=*/false, /*IsCloned=*/false); | |
| } else if (SD->getKind() == SDDbgValue::VREG) { | |
| MIB.addReg(SD->getVReg(), RegState::Debug); | |
| } else if (SD->getKind() == SDDbgValue::CONST) { | |
| const Value *V = SD->getConst(); | |
| if (const ConstantInt *CI = dyn_cast<ConstantInt>(V)) { | |
| if (CI->getBitWidth() > 64) | |
| MIB.addCImm(CI); | |
| else | |
| MIB.addImm(CI->getSExtValue()); | |
| } else if (const ConstantFP *CF = dyn_cast<ConstantFP>(V)) { | |
| MIB.addFPImm(CF); | |
| } else { | |
| // Could be an Undef. In any case insert an Undef so we can see what we | |
| // dropped. | |
| MIB.addReg(0U); | |
| } | |
| } else { | |
| // Insert an Undef so we can see what we dropped. | |
| MIB.addReg(0U); | |
| } | |
| // Indirect addressing is indicated by an Imm as the second parameter. | |
| if (SD->isIndirect()) | |
| MIB.addImm(0U); | |
| else | |
| MIB.addReg(0U, RegState::Debug); | |
| MIB.addMetadata(Var); | |
| MIB.addMetadata(Expr); | |
| return &*MIB; | |
| } | |
| MachineInstr * | |
| InstrEmitter::EmitDbgLabel(SDDbgLabel *SD) { | |
| MDNode *Label = SD->getLabel(); | |
| DebugLoc DL = SD->getDebugLoc(); | |
| assert(cast<DILabel>(Label)->isValidLocationForIntrinsic(DL) && | |
| "Expected inlined-at fields to agree"); | |
| const MCInstrDesc &II = TII->get(TargetOpcode::DBG_LABEL); | |
| MachineInstrBuilder MIB = BuildMI(*MF, DL, II); | |
| MIB.addMetadata(Label); | |
| return &*MIB; | |
| } | |
| /// EmitMachineNode - Generate machine code for a target-specific node and | |
| /// needed dependencies. | |
| /// | |
| void InstrEmitter:: | |
| EmitMachineNode(SDNode *Node, bool IsClone, bool IsCloned, | |
| DenseMap<SDValue, unsigned> &VRBaseMap) { | |
| unsigned Opc = Node->getMachineOpcode(); | |
| // Handle subreg insert/extract specially | |
| if (Opc == TargetOpcode::EXTRACT_SUBREG || | |
| Opc == TargetOpcode::INSERT_SUBREG || | |
| Opc == TargetOpcode::SUBREG_TO_REG) { | |
| EmitSubregNode(Node, VRBaseMap, IsClone, IsCloned); | |
| return; | |
| } | |
| // Handle COPY_TO_REGCLASS specially. | |
| if (Opc == TargetOpcode::COPY_TO_REGCLASS) { | |
| EmitCopyToRegClassNode(Node, VRBaseMap); | |
| return; | |
| } | |
| // Handle REG_SEQUENCE specially. | |
| if (Opc == TargetOpcode::REG_SEQUENCE) { | |
| EmitRegSequence(Node, VRBaseMap, IsClone, IsCloned); | |
| return; | |
| } | |
| if (Opc == TargetOpcode::IMPLICIT_DEF) | |
| // We want a unique VR for each IMPLICIT_DEF use. | |
| return; | |
| const MCInstrDesc &II = TII->get(Opc); | |
| unsigned NumResults = CountResults(Node); | |
| unsigned NumDefs = II.getNumDefs(); | |
| const MCPhysReg *ScratchRegs = nullptr; | |
| // Handle STACKMAP and PATCHPOINT specially and then use the generic code. | |
| if (Opc == TargetOpcode::STACKMAP || Opc == TargetOpcode::PATCHPOINT) { | |
| // Stackmaps do not have arguments and do not preserve their calling | |
| // convention. However, to simplify runtime support, they clobber the same | |
| // scratch registers as AnyRegCC. | |
| unsigned CC = CallingConv::AnyReg; | |
| if (Opc == TargetOpcode::PATCHPOINT) { | |
| CC = Node->getConstantOperandVal(PatchPointOpers::CCPos); | |
| NumDefs = NumResults; | |
| } | |
| ScratchRegs = TLI->getScratchRegisters((CallingConv::ID) CC); | |
| } | |
| unsigned NumImpUses = 0; | |
| unsigned NodeOperands = | |
| countOperands(Node, II.getNumOperands() - NumDefs, NumImpUses); | |
| bool HasPhysRegOuts = NumResults > NumDefs && II.getImplicitDefs()!=nullptr; | |
| #ifndef NDEBUG | |
| unsigned NumMIOperands = NodeOperands + NumResults; | |
| if (II.isVariadic()) | |
| assert(NumMIOperands >= II.getNumOperands() && | |
| "Too few operands for a variadic node!"); | |
| else | |
| assert(NumMIOperands >= II.getNumOperands() && | |
| NumMIOperands <= II.getNumOperands() + II.getNumImplicitDefs() + | |
| NumImpUses && | |
| "#operands for dag node doesn't match .td file!"); | |
| #endif | |
| // Create the new machine instruction. | |
| MachineInstrBuilder MIB = BuildMI(*MF, Node->getDebugLoc(), II); | |
| // Add result register values for things that are defined by this | |
| // instruction. | |
| if (NumResults) { | |
| CreateVirtualRegisters(Node, MIB, II, IsClone, IsCloned, VRBaseMap); | |
| // Transfer any IR flags from the SDNode to the MachineInstr | |
| MachineInstr *MI = MIB.getInstr(); | |
| const SDNodeFlags Flags = Node->getFlags(); | |
| if (Flags.hasNoSignedZeros()) | |
| MI->setFlag(MachineInstr::MIFlag::FmNsz); | |
| if (Flags.hasAllowReciprocal()) | |
| MI->setFlag(MachineInstr::MIFlag::FmArcp); | |
| if (Flags.hasNoNaNs()) | |
| MI->setFlag(MachineInstr::MIFlag::FmNoNans); | |
| if (Flags.hasNoInfs()) | |
| MI->setFlag(MachineInstr::MIFlag::FmNoInfs); | |
| if (Flags.hasAllowContract()) | |
| MI->setFlag(MachineInstr::MIFlag::FmContract); | |
| if (Flags.hasApproximateFuncs()) | |
| MI->setFlag(MachineInstr::MIFlag::FmAfn); | |
| if (Flags.hasAllowReassociation()) | |
| MI->setFlag(MachineInstr::MIFlag::FmReassoc); | |
| } | |
| // Emit all of the actual operands of this instruction, adding them to the | |
| // instruction as appropriate. | |
| bool HasOptPRefs = NumDefs > NumResults; | |
| assert((!HasOptPRefs || !HasPhysRegOuts) && | |
| "Unable to cope with optional defs and phys regs defs!"); | |
| unsigned NumSkip = HasOptPRefs ? NumDefs - NumResults : 0; | |
| for (unsigned i = NumSkip; i != NodeOperands; ++i) | |
| AddOperand(MIB, Node->getOperand(i), i-NumSkip+NumDefs, &II, | |
| VRBaseMap, /*IsDebug=*/false, IsClone, IsCloned); | |
| // Add scratch registers as implicit def and early clobber | |
| if (ScratchRegs) | |
| for (unsigned i = 0; ScratchRegs[i]; ++i) | |
| MIB.addReg(ScratchRegs[i], RegState::ImplicitDefine | | |
| RegState::EarlyClobber); | |
| // Transfer all of the memory reference descriptions of this instruction. | |
| MIB.setMemRefs(cast<MachineSDNode>(Node)->memoperands_begin(), | |
| cast<MachineSDNode>(Node)->memoperands_end()); | |
| // Insert the instruction into position in the block. This needs to | |
| // happen before any custom inserter hook is called so that the | |
| // hook knows where in the block to insert the replacement code. | |
| MBB->insert(InsertPos, MIB); | |
| // The MachineInstr may also define physregs instead of virtregs. These | |
| // physreg values can reach other instructions in different ways: | |
| // | |
| // 1. When there is a use of a Node value beyond the explicitly defined | |
| // virtual registers, we emit a CopyFromReg for one of the implicitly | |
| // defined physregs. This only happens when HasPhysRegOuts is true. | |
| // | |
| // 2. A CopyFromReg reading a physreg may be glued to this instruction. | |
| // | |
| // 3. A glued instruction may implicitly use a physreg. | |
| // | |
| // 4. A glued instruction may use a RegisterSDNode operand. | |
| // | |
| // Collect all the used physreg defs, and make sure that any unused physreg | |
| // defs are marked as dead. | |
| SmallVector<unsigned, 8> UsedRegs; | |
| // Additional results must be physical register defs. | |
| if (HasPhysRegOuts) { | |
| for (unsigned i = NumDefs; i < NumResults; ++i) { | |
| unsigned Reg = II.getImplicitDefs()[i - NumDefs]; | |
| if (!Node->hasAnyUseOfValue(i)) | |
| continue; | |
| // This implicitly defined physreg has a use. | |
| UsedRegs.push_back(Reg); | |
| EmitCopyFromReg(Node, i, IsClone, IsCloned, Reg, VRBaseMap); | |
| } | |
| } | |
| // Scan the glue chain for any used physregs. | |
| if (Node->getValueType(Node->getNumValues()-1) == MVT::Glue) { | |
| for (SDNode *F = Node->getGluedUser(); F; F = F->getGluedUser()) { | |
| if (F->getOpcode() == ISD::CopyFromReg) { | |
| UsedRegs.push_back(cast<RegisterSDNode>(F->getOperand(1))->getReg()); | |
| continue; | |
| } else if (F->getOpcode() == ISD::CopyToReg) { | |
| // Skip CopyToReg nodes that are internal to the glue chain. | |
| continue; | |
| } | |
| // Collect declared implicit uses. | |
| const MCInstrDesc &MCID = TII->get(F->getMachineOpcode()); | |
| UsedRegs.append(MCID.getImplicitUses(), | |
| MCID.getImplicitUses() + MCID.getNumImplicitUses()); | |
| // In addition to declared implicit uses, we must also check for | |
| // direct RegisterSDNode operands. | |
| for (unsigned i = 0, e = F->getNumOperands(); i != e; ++i) | |
| if (RegisterSDNode *R = dyn_cast<RegisterSDNode>(F->getOperand(i))) { | |
| unsigned Reg = R->getReg(); | |
| if (TargetRegisterInfo::isPhysicalRegister(Reg)) | |
| UsedRegs.push_back(Reg); | |
| } | |
| } | |
| } | |
| // Finally mark unused registers as dead. | |
| if (!UsedRegs.empty() || II.getImplicitDefs()) | |
| MIB->setPhysRegsDeadExcept(UsedRegs, *TRI); | |
| // Run post-isel target hook to adjust this instruction if needed. | |
| if (II.hasPostISelHook()) | |
| TLI->AdjustInstrPostInstrSelection(*MIB, Node); | |
| } | |
| /// EmitSpecialNode - Generate machine code for a target-independent node and | |
| /// needed dependencies. | |
| void InstrEmitter:: | |
| EmitSpecialNode(SDNode *Node, bool IsClone, bool IsCloned, | |
| DenseMap<SDValue, unsigned> &VRBaseMap) { | |
| switch (Node->getOpcode()) { | |
| default: | |
| #ifndef NDEBUG | |
| Node->dump(); | |
| #endif | |
| llvm_unreachable("This target-independent node should have been selected!"); | |
| case ISD::EntryToken: | |
| llvm_unreachable("EntryToken should have been excluded from the schedule!"); | |
| case ISD::MERGE_VALUES: | |
| case ISD::TokenFactor: // fall thru | |
| break; | |
| case ISD::CopyToReg: { | |
| unsigned SrcReg; | |
| SDValue SrcVal = Node->getOperand(2); | |
| if (RegisterSDNode *R = dyn_cast<RegisterSDNode>(SrcVal)) | |
| SrcReg = R->getReg(); | |
| else | |
| SrcReg = getVR(SrcVal, VRBaseMap); | |
| unsigned DestReg = cast<RegisterSDNode>(Node->getOperand(1))->getReg(); | |
| if (SrcReg == DestReg) // Coalesced away the copy? Ignore. | |
| break; | |
| BuildMI(*MBB, InsertPos, Node->getDebugLoc(), TII->get(TargetOpcode::COPY), | |
| DestReg).addReg(SrcReg); | |
| break; | |
| } | |
| case ISD::CopyFromReg: { | |
| unsigned SrcReg = cast<RegisterSDNode>(Node->getOperand(1))->getReg(); | |
| EmitCopyFromReg(Node, 0, IsClone, IsCloned, SrcReg, VRBaseMap); | |
| break; | |
| } | |
| case ISD::EH_LABEL: | |
| case ISD::ANNOTATION_LABEL: { | |
| unsigned Opc = (Node->getOpcode() == ISD::EH_LABEL) | |
| ? TargetOpcode::EH_LABEL | |
| : TargetOpcode::ANNOTATION_LABEL; | |
| MCSymbol *S = cast<LabelSDNode>(Node)->getLabel(); | |
| BuildMI(*MBB, InsertPos, Node->getDebugLoc(), | |
| TII->get(Opc)).addSym(S); | |
| break; | |
| } | |
| case ISD::LIFETIME_START: | |
| case ISD::LIFETIME_END: { | |
| unsigned TarOp = (Node->getOpcode() == ISD::LIFETIME_START) ? | |
| TargetOpcode::LIFETIME_START : TargetOpcode::LIFETIME_END; | |
| FrameIndexSDNode *FI = dyn_cast<FrameIndexSDNode>(Node->getOperand(1)); | |
| BuildMI(*MBB, InsertPos, Node->getDebugLoc(), TII->get(TarOp)) | |
| .addFrameIndex(FI->getIndex()); | |
| break; | |
| } | |
| case ISD::INLINEASM: { | |
| unsigned NumOps = Node->getNumOperands(); | |
| if (Node->getOperand(NumOps-1).getValueType() == MVT::Glue) | |
| --NumOps; // Ignore the glue operand. | |
| // Create the inline asm machine instruction. | |
| MachineInstrBuilder MIB = BuildMI(*MF, Node->getDebugLoc(), | |
| TII->get(TargetOpcode::INLINEASM)); | |
| // Add the asm string as an external symbol operand. | |
| SDValue AsmStrV = Node->getOperand(InlineAsm::Op_AsmString); | |
| const char *AsmStr = cast<ExternalSymbolSDNode>(AsmStrV)->getSymbol(); | |
| MIB.addExternalSymbol(AsmStr); | |
| // Add the HasSideEffect, isAlignStack, AsmDialect, MayLoad and MayStore | |
| // bits. | |
| int64_t ExtraInfo = | |
| cast<ConstantSDNode>(Node->getOperand(InlineAsm::Op_ExtraInfo))-> | |
| getZExtValue(); | |
| MIB.addImm(ExtraInfo); | |
| // Remember to operand index of the group flags. | |
| SmallVector<unsigned, 8> GroupIdx; | |
| // Remember registers that are part of early-clobber defs. | |
| SmallVector<unsigned, 8> ECRegs; | |
| // Add all of the operand registers to the instruction. | |
| for (unsigned i = InlineAsm::Op_FirstOperand; i != NumOps;) { | |
| unsigned Flags = | |
| cast<ConstantSDNode>(Node->getOperand(i))->getZExtValue(); | |
| const unsigned NumVals = InlineAsm::getNumOperandRegisters(Flags); | |
| GroupIdx.push_back(MIB->getNumOperands()); | |
| MIB.addImm(Flags); | |
| ++i; // Skip the ID value. | |
| switch (InlineAsm::getKind(Flags)) { | |
| default: llvm_unreachable("Bad flags!"); | |
| case InlineAsm::Kind_RegDef: | |
| for (unsigned j = 0; j != NumVals; ++j, ++i) { | |
| unsigned Reg = cast<RegisterSDNode>(Node->getOperand(i))->getReg(); | |
| // FIXME: Add dead flags for physical and virtual registers defined. | |
| // For now, mark physical register defs as implicit to help fast | |
| // regalloc. This makes inline asm look a lot like calls. | |
| MIB.addReg(Reg, RegState::Define | | |
| getImplRegState(TargetRegisterInfo::isPhysicalRegister(Reg))); | |
| } | |
| break; | |
| case InlineAsm::Kind_RegDefEarlyClobber: | |
| case InlineAsm::Kind_Clobber: | |
| for (unsigned j = 0; j != NumVals; ++j, ++i) { | |
| unsigned Reg = cast<RegisterSDNode>(Node->getOperand(i))->getReg(); | |
| MIB.addReg(Reg, RegState::Define | RegState::EarlyClobber | | |
| getImplRegState(TargetRegisterInfo::isPhysicalRegister(Reg))); | |
| ECRegs.push_back(Reg); | |
| } | |
| break; | |
| case InlineAsm::Kind_RegUse: // Use of register. | |
| case InlineAsm::Kind_Imm: // Immediate. | |
| case InlineAsm::Kind_Mem: // Addressing mode. | |
| // The addressing mode has been selected, just add all of the | |
| // operands to the machine instruction. | |
| for (unsigned j = 0; j != NumVals; ++j, ++i) | |
| AddOperand(MIB, Node->getOperand(i), 0, nullptr, VRBaseMap, | |
| /*IsDebug=*/false, IsClone, IsCloned); | |
| // Manually set isTied bits. | |
| if (InlineAsm::getKind(Flags) == InlineAsm::Kind_RegUse) { | |
| unsigned DefGroup = 0; | |
| if (InlineAsm::isUseOperandTiedToDef(Flags, DefGroup)) { | |
| unsigned DefIdx = GroupIdx[DefGroup] + 1; | |
| unsigned UseIdx = GroupIdx.back() + 1; | |
| for (unsigned j = 0; j != NumVals; ++j) | |
| MIB->tieOperands(DefIdx + j, UseIdx + j); | |
| } | |
| } | |
| break; | |
| } | |
| } | |
| // GCC inline assembly allows input operands to also be early-clobber | |
| // output operands (so long as the operand is written only after it's | |
| // used), but this does not match the semantics of our early-clobber flag. | |
| // If an early-clobber operand register is also an input operand register, | |
| // then remove the early-clobber flag. | |
| for (unsigned Reg : ECRegs) { | |
| if (MIB->readsRegister(Reg, TRI)) { | |
| MachineOperand *MO = MIB->findRegisterDefOperand(Reg, false, TRI); | |
| assert(MO && "No def operand for clobbered register?"); | |
| MO->setIsEarlyClobber(false); | |
| } | |
| } | |
| // Get the mdnode from the asm if it exists and add it to the instruction. | |
| SDValue MDV = Node->getOperand(InlineAsm::Op_MDNode); | |
| const MDNode *MD = cast<MDNodeSDNode>(MDV)->getMD(); | |
| if (MD) | |
| MIB.addMetadata(MD); | |
| MBB->insert(InsertPos, MIB); | |
| break; | |
| } | |
| } | |
| } | |
| /// InstrEmitter - Construct an InstrEmitter and set it to start inserting | |
| /// at the given position in the given block. | |
| InstrEmitter::InstrEmitter(MachineBasicBlock *mbb, | |
| MachineBasicBlock::iterator insertpos) | |
| : MF(mbb->getParent()), MRI(&MF->getRegInfo()), | |
| TII(MF->getSubtarget().getInstrInfo()), | |
| TRI(MF->getSubtarget().getRegisterInfo()), | |
| TLI(MF->getSubtarget().getTargetLowering()), MBB(mbb), | |
| InsertPos(insertpos) {} |