| //===- LiveDebugVariables.cpp - Tracking debug info variables -------------===// | |
| // | |
| // The LLVM Compiler Infrastructure | |
| // | |
| // This file is distributed under the University of Illinois Open Source | |
| // License. See LICENSE.TXT for details. | |
| // | |
| //===----------------------------------------------------------------------===// | |
| // | |
| // This file implements the LiveDebugVariables analysis. | |
| // | |
| // Remove all DBG_VALUE instructions referencing virtual registers and replace | |
| // them with a data structure tracking where live user variables are kept - in a | |
| // virtual register or in a stack slot. | |
| // | |
| // Allow the data structure to be updated during register allocation when values | |
| // are moved between registers and stack slots. Finally emit new DBG_VALUE | |
| // instructions after register allocation is complete. | |
| // | |
| //===----------------------------------------------------------------------===// | |
| #include "LiveDebugVariables.h" | |
| #include "llvm/ADT/ArrayRef.h" | |
| #include "llvm/ADT/DenseMap.h" | |
| #include "llvm/ADT/IntervalMap.h" | |
| #include "llvm/ADT/STLExtras.h" | |
| #include "llvm/ADT/SmallSet.h" | |
| #include "llvm/ADT/SmallVector.h" | |
| #include "llvm/ADT/Statistic.h" | |
| #include "llvm/ADT/StringRef.h" | |
| #include "llvm/CodeGen/LexicalScopes.h" | |
| #include "llvm/CodeGen/LiveInterval.h" | |
| #include "llvm/CodeGen/LiveIntervals.h" | |
| #include "llvm/CodeGen/MachineBasicBlock.h" | |
| #include "llvm/CodeGen/MachineDominators.h" | |
| #include "llvm/CodeGen/MachineFunction.h" | |
| #include "llvm/CodeGen/MachineInstr.h" | |
| #include "llvm/CodeGen/MachineInstrBuilder.h" | |
| #include "llvm/CodeGen/MachineOperand.h" | |
| #include "llvm/CodeGen/MachineRegisterInfo.h" | |
| #include "llvm/CodeGen/SlotIndexes.h" | |
| #include "llvm/CodeGen/TargetInstrInfo.h" | |
| #include "llvm/CodeGen/TargetOpcodes.h" | |
| #include "llvm/CodeGen/TargetRegisterInfo.h" | |
| #include "llvm/CodeGen/TargetSubtargetInfo.h" | |
| #include "llvm/CodeGen/VirtRegMap.h" | |
| #include "llvm/Config/llvm-config.h" | |
| #include "llvm/IR/DebugInfoMetadata.h" | |
| #include "llvm/IR/DebugLoc.h" | |
| #include "llvm/IR/Function.h" | |
| #include "llvm/IR/Metadata.h" | |
| #include "llvm/MC/MCRegisterInfo.h" | |
| #include "llvm/Pass.h" | |
| #include "llvm/Support/Casting.h" | |
| #include "llvm/Support/CommandLine.h" | |
| #include "llvm/Support/Compiler.h" | |
| #include "llvm/Support/Debug.h" | |
| #include "llvm/Support/raw_ostream.h" | |
| #include <algorithm> | |
| #include <cassert> | |
| #include <iterator> | |
| #include <memory> | |
| #include <utility> | |
| using namespace llvm; | |
| #define DEBUG_TYPE "livedebugvars" | |
| static cl::opt<bool> | |
| EnableLDV("live-debug-variables", cl::init(true), | |
| cl::desc("Enable the live debug variables pass"), cl::Hidden); | |
| STATISTIC(NumInsertedDebugValues, "Number of DBG_VALUEs inserted"); | |
| char LiveDebugVariables::ID = 0; | |
| INITIALIZE_PASS_BEGIN(LiveDebugVariables, DEBUG_TYPE, | |
| "Debug Variable Analysis", false, false) | |
| INITIALIZE_PASS_DEPENDENCY(MachineDominatorTree) | |
| INITIALIZE_PASS_DEPENDENCY(LiveIntervals) | |
| INITIALIZE_PASS_END(LiveDebugVariables, DEBUG_TYPE, | |
| "Debug Variable Analysis", false, false) | |
| void LiveDebugVariables::getAnalysisUsage(AnalysisUsage &AU) const { | |
| AU.addRequired<MachineDominatorTree>(); | |
| AU.addRequiredTransitive<LiveIntervals>(); | |
| AU.setPreservesAll(); | |
| MachineFunctionPass::getAnalysisUsage(AU); | |
| } | |
| LiveDebugVariables::LiveDebugVariables() : MachineFunctionPass(ID) { | |
| initializeLiveDebugVariablesPass(*PassRegistry::getPassRegistry()); | |
| } | |
| enum : unsigned { UndefLocNo = ~0U }; | |
| /// Describes a location by number along with some flags about the original | |
| /// usage of the location. | |
| class DbgValueLocation { | |
| public: | |
| DbgValueLocation(unsigned LocNo, bool WasIndirect) | |
| : LocNo(LocNo), WasIndirect(WasIndirect) { | |
| static_assert(sizeof(*this) == sizeof(unsigned), "bad bitfield packing"); | |
| assert(locNo() == LocNo && "location truncation"); | |
| } | |
| DbgValueLocation() : LocNo(0), WasIndirect(0) {} | |
| unsigned locNo() const { | |
| // Fix up the undef location number, which gets truncated. | |
| return LocNo == INT_MAX ? UndefLocNo : LocNo; | |
| } | |
| bool wasIndirect() const { return WasIndirect; } | |
| bool isUndef() const { return locNo() == UndefLocNo; } | |
| DbgValueLocation changeLocNo(unsigned NewLocNo) const { | |
| return DbgValueLocation(NewLocNo, WasIndirect); | |
| } | |
| friend inline bool operator==(const DbgValueLocation &LHS, | |
| const DbgValueLocation &RHS) { | |
| return LHS.LocNo == RHS.LocNo && LHS.WasIndirect == RHS.WasIndirect; | |
| } | |
| friend inline bool operator!=(const DbgValueLocation &LHS, | |
| const DbgValueLocation &RHS) { | |
| return !(LHS == RHS); | |
| } | |
| private: | |
| unsigned LocNo : 31; | |
| unsigned WasIndirect : 1; | |
| }; | |
| /// LocMap - Map of where a user value is live, and its location. | |
| using LocMap = IntervalMap<SlotIndex, DbgValueLocation, 4>; | |
| namespace { | |
| class LDVImpl; | |
| /// UserValue - A user value is a part of a debug info user variable. | |
| /// | |
| /// A DBG_VALUE instruction notes that (a sub-register of) a virtual register | |
| /// holds part of a user variable. The part is identified by a byte offset. | |
| /// | |
| /// UserValues are grouped into equivalence classes for easier searching. Two | |
| /// user values are related if they refer to the same variable, or if they are | |
| /// held by the same virtual register. The equivalence class is the transitive | |
| /// closure of that relation. | |
| class UserValue { | |
| const DILocalVariable *Variable; ///< The debug info variable we are part of. | |
| const DIExpression *Expression; ///< Any complex address expression. | |
| DebugLoc dl; ///< The debug location for the variable. This is | |
| ///< used by dwarf writer to find lexical scope. | |
| UserValue *leader; ///< Equivalence class leader. | |
| UserValue *next = nullptr; ///< Next value in equivalence class, or null. | |
| /// Numbered locations referenced by locmap. | |
| SmallVector<MachineOperand, 4> locations; | |
| /// Map of slot indices where this value is live. | |
| LocMap locInts; | |
| /// Set of interval start indexes that have been trimmed to the | |
| /// lexical scope. | |
| SmallSet<SlotIndex, 2> trimmedDefs; | |
| /// insertDebugValue - Insert a DBG_VALUE into MBB at Idx for LocNo. | |
| void insertDebugValue(MachineBasicBlock *MBB, SlotIndex StartIdx, | |
| SlotIndex StopIdx, | |
| DbgValueLocation Loc, bool Spilled, LiveIntervals &LIS, | |
| const TargetInstrInfo &TII, | |
| const TargetRegisterInfo &TRI); | |
| /// splitLocation - Replace OldLocNo ranges with NewRegs ranges where NewRegs | |
| /// is live. Returns true if any changes were made. | |
| bool splitLocation(unsigned OldLocNo, ArrayRef<unsigned> NewRegs, | |
| LiveIntervals &LIS); | |
| public: | |
| /// UserValue - Create a new UserValue. | |
| UserValue(const DILocalVariable *var, const DIExpression *expr, DebugLoc L, | |
| LocMap::Allocator &alloc) | |
| : Variable(var), Expression(expr), dl(std::move(L)), leader(this), | |
| locInts(alloc) {} | |
| /// getLeader - Get the leader of this value's equivalence class. | |
| UserValue *getLeader() { | |
| UserValue *l = leader; | |
| while (l != l->leader) | |
| l = l->leader; | |
| return leader = l; | |
| } | |
| /// getNext - Return the next UserValue in the equivalence class. | |
| UserValue *getNext() const { return next; } | |
| /// match - Does this UserValue match the parameters? | |
| bool match(const DILocalVariable *Var, const DIExpression *Expr, | |
| const DILocation *IA) const { | |
| // FIXME: The fragment should be part of the equivalence class, but not | |
| // other things in the expression like stack values. | |
| return Var == Variable && Expr == Expression && dl->getInlinedAt() == IA; | |
| } | |
| /// merge - Merge equivalence classes. | |
| static UserValue *merge(UserValue *L1, UserValue *L2) { | |
| L2 = L2->getLeader(); | |
| if (!L1) | |
| return L2; | |
| L1 = L1->getLeader(); | |
| if (L1 == L2) | |
| return L1; | |
| // Splice L2 before L1's members. | |
| UserValue *End = L2; | |
| while (End->next) { | |
| End->leader = L1; | |
| End = End->next; | |
| } | |
| End->leader = L1; | |
| End->next = L1->next; | |
| L1->next = L2; | |
| return L1; | |
| } | |
| /// Return the location number that matches Loc. | |
| /// | |
| /// For undef values we always return location number UndefLocNo without | |
| /// inserting anything in locations. Since locations is a vector and the | |
| /// location number is the position in the vector and UndefLocNo is ~0, | |
| /// we would need a very big vector to put the value at the right position. | |
| unsigned getLocationNo(const MachineOperand &LocMO) { | |
| if (LocMO.isReg()) { | |
| if (LocMO.getReg() == 0) | |
| return UndefLocNo; | |
| // For register locations we dont care about use/def and other flags. | |
| for (unsigned i = 0, e = locations.size(); i != e; ++i) | |
| if (locations[i].isReg() && | |
| locations[i].getReg() == LocMO.getReg() && | |
| locations[i].getSubReg() == LocMO.getSubReg()) | |
| return i; | |
| } else | |
| for (unsigned i = 0, e = locations.size(); i != e; ++i) | |
| if (LocMO.isIdenticalTo(locations[i])) | |
| return i; | |
| locations.push_back(LocMO); | |
| // We are storing a MachineOperand outside a MachineInstr. | |
| locations.back().clearParent(); | |
| // Don't store def operands. | |
| if (locations.back().isReg()) { | |
| if (locations.back().isDef()) | |
| locations.back().setIsDead(false); | |
| locations.back().setIsUse(); | |
| } | |
| return locations.size() - 1; | |
| } | |
| /// mapVirtRegs - Ensure that all virtual register locations are mapped. | |
| void mapVirtRegs(LDVImpl *LDV); | |
| /// addDef - Add a definition point to this value. | |
| void addDef(SlotIndex Idx, const MachineOperand &LocMO, bool IsIndirect) { | |
| DbgValueLocation Loc(getLocationNo(LocMO), IsIndirect); | |
| // Add a singular (Idx,Idx) -> Loc mapping. | |
| LocMap::iterator I = locInts.find(Idx); | |
| if (!I.valid() || I.start() != Idx) | |
| I.insert(Idx, Idx.getNextSlot(), Loc); | |
| else | |
| // A later DBG_VALUE at the same SlotIndex overrides the old location. | |
| I.setValue(Loc); | |
| } | |
| /// extendDef - Extend the current definition as far as possible down. | |
| /// Stop when meeting an existing def or when leaving the live | |
| /// range of VNI. | |
| /// End points where VNI is no longer live are added to Kills. | |
| /// @param Idx Starting point for the definition. | |
| /// @param Loc Location number to propagate. | |
| /// @param LR Restrict liveness to where LR has the value VNI. May be null. | |
| /// @param VNI When LR is not null, this is the value to restrict to. | |
| /// @param Kills Append end points of VNI's live range to Kills. | |
| /// @param LIS Live intervals analysis. | |
| void extendDef(SlotIndex Idx, DbgValueLocation Loc, | |
| LiveRange *LR, const VNInfo *VNI, | |
| SmallVectorImpl<SlotIndex> *Kills, | |
| LiveIntervals &LIS); | |
| /// addDefsFromCopies - The value in LI/LocNo may be copies to other | |
| /// registers. Determine if any of the copies are available at the kill | |
| /// points, and add defs if possible. | |
| /// @param LI Scan for copies of the value in LI->reg. | |
| /// @param LocNo Location number of LI->reg. | |
| /// @param WasIndirect Indicates if the original use of LI->reg was indirect | |
| /// @param Kills Points where the range of LocNo could be extended. | |
| /// @param NewDefs Append (Idx, LocNo) of inserted defs here. | |
| void addDefsFromCopies( | |
| LiveInterval *LI, unsigned LocNo, bool WasIndirect, | |
| const SmallVectorImpl<SlotIndex> &Kills, | |
| SmallVectorImpl<std::pair<SlotIndex, DbgValueLocation>> &NewDefs, | |
| MachineRegisterInfo &MRI, LiveIntervals &LIS); | |
| /// computeIntervals - Compute the live intervals of all locations after | |
| /// collecting all their def points. | |
| void computeIntervals(MachineRegisterInfo &MRI, const TargetRegisterInfo &TRI, | |
| LiveIntervals &LIS, LexicalScopes &LS); | |
| /// splitRegister - Replace OldReg ranges with NewRegs ranges where NewRegs is | |
| /// live. Returns true if any changes were made. | |
| bool splitRegister(unsigned OldReg, ArrayRef<unsigned> NewRegs, | |
| LiveIntervals &LIS); | |
| /// rewriteLocations - Rewrite virtual register locations according to the | |
| /// provided virtual register map. Record which locations were spilled. | |
| void rewriteLocations(VirtRegMap &VRM, const TargetRegisterInfo &TRI, | |
| BitVector &SpilledLocations); | |
| /// emitDebugValues - Recreate DBG_VALUE instruction from data structures. | |
| void emitDebugValues(VirtRegMap *VRM, LiveIntervals &LIS, | |
| const TargetInstrInfo &TII, | |
| const TargetRegisterInfo &TRI, | |
| const BitVector &SpilledLocations); | |
| /// getDebugLoc - Return DebugLoc of this UserValue. | |
| DebugLoc getDebugLoc() { return dl;} | |
| void print(raw_ostream &, const TargetRegisterInfo *); | |
| }; | |
| /// LDVImpl - Implementation of the LiveDebugVariables pass. | |
| class LDVImpl { | |
| LiveDebugVariables &pass; | |
| LocMap::Allocator allocator; | |
| MachineFunction *MF = nullptr; | |
| LiveIntervals *LIS; | |
| const TargetRegisterInfo *TRI; | |
| /// Whether emitDebugValues is called. | |
| bool EmitDone = false; | |
| /// Whether the machine function is modified during the pass. | |
| bool ModifiedMF = false; | |
| /// userValues - All allocated UserValue instances. | |
| SmallVector<std::unique_ptr<UserValue>, 8> userValues; | |
| /// Map virtual register to eq class leader. | |
| using VRMap = DenseMap<unsigned, UserValue *>; | |
| VRMap virtRegToEqClass; | |
| /// Map user variable to eq class leader. | |
| using UVMap = DenseMap<const DILocalVariable *, UserValue *>; | |
| UVMap userVarMap; | |
| /// getUserValue - Find or create a UserValue. | |
| UserValue *getUserValue(const DILocalVariable *Var, const DIExpression *Expr, | |
| const DebugLoc &DL); | |
| /// lookupVirtReg - Find the EC leader for VirtReg or null. | |
| UserValue *lookupVirtReg(unsigned VirtReg); | |
| /// handleDebugValue - Add DBG_VALUE instruction to our maps. | |
| /// @param MI DBG_VALUE instruction | |
| /// @param Idx Last valid SLotIndex before instruction. | |
| /// @return True if the DBG_VALUE instruction should be deleted. | |
| bool handleDebugValue(MachineInstr &MI, SlotIndex Idx); | |
| /// collectDebugValues - Collect and erase all DBG_VALUE instructions, adding | |
| /// a UserValue def for each instruction. | |
| /// @param mf MachineFunction to be scanned. | |
| /// @return True if any debug values were found. | |
| bool collectDebugValues(MachineFunction &mf); | |
| /// computeIntervals - Compute the live intervals of all user values after | |
| /// collecting all their def points. | |
| void computeIntervals(); | |
| public: | |
| LDVImpl(LiveDebugVariables *ps) : pass(*ps) {} | |
| bool runOnMachineFunction(MachineFunction &mf); | |
| /// clear - Release all memory. | |
| void clear() { | |
| MF = nullptr; | |
| userValues.clear(); | |
| virtRegToEqClass.clear(); | |
| userVarMap.clear(); | |
| // Make sure we call emitDebugValues if the machine function was modified. | |
| assert((!ModifiedMF || EmitDone) && | |
| "Dbg values are not emitted in LDV"); | |
| EmitDone = false; | |
| ModifiedMF = false; | |
| } | |
| /// mapVirtReg - Map virtual register to an equivalence class. | |
| void mapVirtReg(unsigned VirtReg, UserValue *EC); | |
| /// splitRegister - Replace all references to OldReg with NewRegs. | |
| void splitRegister(unsigned OldReg, ArrayRef<unsigned> NewRegs); | |
| /// emitDebugValues - Recreate DBG_VALUE instruction from data structures. | |
| void emitDebugValues(VirtRegMap *VRM); | |
| void print(raw_ostream&); | |
| }; | |
| } // end anonymous namespace | |
| #if !defined(NDEBUG) || defined(LLVM_ENABLE_DUMP) | |
| static void printDebugLoc(const DebugLoc &DL, raw_ostream &CommentOS, | |
| const LLVMContext &Ctx) { | |
| if (!DL) | |
| return; | |
| auto *Scope = cast<DIScope>(DL.getScope()); | |
| // Omit the directory, because it's likely to be long and uninteresting. | |
| CommentOS << Scope->getFilename(); | |
| CommentOS << ':' << DL.getLine(); | |
| if (DL.getCol() != 0) | |
| CommentOS << ':' << DL.getCol(); | |
| DebugLoc InlinedAtDL = DL.getInlinedAt(); | |
| if (!InlinedAtDL) | |
| return; | |
| CommentOS << " @[ "; | |
| printDebugLoc(InlinedAtDL, CommentOS, Ctx); | |
| CommentOS << " ]"; | |
| } | |
| static void printExtendedName(raw_ostream &OS, const DILocalVariable *V, | |
| const DILocation *DL) { | |
| const LLVMContext &Ctx = V->getContext(); | |
| StringRef Res = V->getName(); | |
| if (!Res.empty()) | |
| OS << Res << "," << V->getLine(); | |
| if (auto *InlinedAt = DL->getInlinedAt()) { | |
| if (DebugLoc InlinedAtDL = InlinedAt) { | |
| OS << " @["; | |
| printDebugLoc(InlinedAtDL, OS, Ctx); | |
| OS << "]"; | |
| } | |
| } | |
| } | |
| void UserValue::print(raw_ostream &OS, const TargetRegisterInfo *TRI) { | |
| auto *DV = cast<DILocalVariable>(Variable); | |
| OS << "!\""; | |
| printExtendedName(OS, DV, dl); | |
| OS << "\"\t"; | |
| for (LocMap::const_iterator I = locInts.begin(); I.valid(); ++I) { | |
| OS << " [" << I.start() << ';' << I.stop() << "):"; | |
| if (I.value().isUndef()) | |
| OS << "undef"; | |
| else { | |
| OS << I.value().locNo(); | |
| if (I.value().wasIndirect()) | |
| OS << " ind"; | |
| } | |
| } | |
| for (unsigned i = 0, e = locations.size(); i != e; ++i) { | |
| OS << " Loc" << i << '='; | |
| locations[i].print(OS, TRI); | |
| } | |
| OS << '\n'; | |
| } | |
| void LDVImpl::print(raw_ostream &OS) { | |
| OS << "********** DEBUG VARIABLES **********\n"; | |
| for (unsigned i = 0, e = userValues.size(); i != e; ++i) | |
| userValues[i]->print(OS, TRI); | |
| } | |
| #endif | |
| void UserValue::mapVirtRegs(LDVImpl *LDV) { | |
| for (unsigned i = 0, e = locations.size(); i != e; ++i) | |
| if (locations[i].isReg() && | |
| TargetRegisterInfo::isVirtualRegister(locations[i].getReg())) | |
| LDV->mapVirtReg(locations[i].getReg(), this); | |
| } | |
| UserValue *LDVImpl::getUserValue(const DILocalVariable *Var, | |
| const DIExpression *Expr, const DebugLoc &DL) { | |
| UserValue *&Leader = userVarMap[Var]; | |
| if (Leader) { | |
| UserValue *UV = Leader->getLeader(); | |
| Leader = UV; | |
| for (; UV; UV = UV->getNext()) | |
| if (UV->match(Var, Expr, DL->getInlinedAt())) | |
| return UV; | |
| } | |
| userValues.push_back( | |
| llvm::make_unique<UserValue>(Var, Expr, DL, allocator)); | |
| UserValue *UV = userValues.back().get(); | |
| Leader = UserValue::merge(Leader, UV); | |
| return UV; | |
| } | |
| void LDVImpl::mapVirtReg(unsigned VirtReg, UserValue *EC) { | |
| assert(TargetRegisterInfo::isVirtualRegister(VirtReg) && "Only map VirtRegs"); | |
| UserValue *&Leader = virtRegToEqClass[VirtReg]; | |
| Leader = UserValue::merge(Leader, EC); | |
| } | |
| UserValue *LDVImpl::lookupVirtReg(unsigned VirtReg) { | |
| if (UserValue *UV = virtRegToEqClass.lookup(VirtReg)) | |
| return UV->getLeader(); | |
| return nullptr; | |
| } | |
| bool LDVImpl::handleDebugValue(MachineInstr &MI, SlotIndex Idx) { | |
| // DBG_VALUE loc, offset, variable | |
| if (MI.getNumOperands() != 4 || | |
| !(MI.getOperand(1).isReg() || MI.getOperand(1).isImm()) || | |
| !MI.getOperand(2).isMetadata()) { | |
| LLVM_DEBUG(dbgs() << "Can't handle " << MI); | |
| return false; | |
| } | |
| // Detect invalid DBG_VALUE instructions, with a debug-use of a virtual | |
| // register that hasn't been defined yet. If we do not remove those here, then | |
| // the re-insertion of the DBG_VALUE instruction after register allocation | |
| // will be incorrect. | |
| // TODO: If earlier passes are corrected to generate sane debug information | |
| // (and if the machine verifier is improved to catch this), then these checks | |
| // could be removed or replaced by asserts. | |
| bool Discard = false; | |
| if (MI.getOperand(0).isReg() && | |
| TargetRegisterInfo::isVirtualRegister(MI.getOperand(0).getReg())) { | |
| const unsigned Reg = MI.getOperand(0).getReg(); | |
| if (!LIS->hasInterval(Reg)) { | |
| // The DBG_VALUE is described by a virtual register that does not have a | |
| // live interval. Discard the DBG_VALUE. | |
| Discard = true; | |
| LLVM_DEBUG(dbgs() << "Discarding debug info (no LIS interval): " << Idx | |
| << " " << MI); | |
| } else { | |
| // The DBG_VALUE is only valid if either Reg is live out from Idx, or Reg | |
| // is defined dead at Idx (where Idx is the slot index for the instruction | |
| // preceeding the DBG_VALUE). | |
| const LiveInterval &LI = LIS->getInterval(Reg); | |
| LiveQueryResult LRQ = LI.Query(Idx); | |
| if (!LRQ.valueOutOrDead()) { | |
| // We have found a DBG_VALUE with the value in a virtual register that | |
| // is not live. Discard the DBG_VALUE. | |
| Discard = true; | |
| LLVM_DEBUG(dbgs() << "Discarding debug info (reg not live): " << Idx | |
| << " " << MI); | |
| } | |
| } | |
| } | |
| // Get or create the UserValue for (variable,offset) here. | |
| bool IsIndirect = MI.getOperand(1).isImm(); | |
| if (IsIndirect) | |
| assert(MI.getOperand(1).getImm() == 0 && "DBG_VALUE with nonzero offset"); | |
| const DILocalVariable *Var = MI.getDebugVariable(); | |
| const DIExpression *Expr = MI.getDebugExpression(); | |
| UserValue *UV = | |
| getUserValue(Var, Expr, MI.getDebugLoc()); | |
| if (!Discard) | |
| UV->addDef(Idx, MI.getOperand(0), IsIndirect); | |
| else { | |
| MachineOperand MO = MachineOperand::CreateReg(0U, false); | |
| MO.setIsDebug(); | |
| UV->addDef(Idx, MO, false); | |
| } | |
| return true; | |
| } | |
| bool LDVImpl::collectDebugValues(MachineFunction &mf) { | |
| bool Changed = false; | |
| for (MachineFunction::iterator MFI = mf.begin(), MFE = mf.end(); MFI != MFE; | |
| ++MFI) { | |
| MachineBasicBlock *MBB = &*MFI; | |
| for (MachineBasicBlock::iterator MBBI = MBB->begin(), MBBE = MBB->end(); | |
| MBBI != MBBE;) { | |
| if (!MBBI->isDebugValue()) { | |
| ++MBBI; | |
| continue; | |
| } | |
| // DBG_VALUE has no slot index, use the previous instruction instead. | |
| SlotIndex Idx = | |
| MBBI == MBB->begin() | |
| ? LIS->getMBBStartIdx(MBB) | |
| : LIS->getInstructionIndex(*std::prev(MBBI)).getRegSlot(); | |
| // Handle consecutive DBG_VALUE instructions with the same slot index. | |
| do { | |
| if (handleDebugValue(*MBBI, Idx)) { | |
| MBBI = MBB->erase(MBBI); | |
| Changed = true; | |
| } else | |
| ++MBBI; | |
| } while (MBBI != MBBE && MBBI->isDebugValue()); | |
| } | |
| } | |
| return Changed; | |
| } | |
| /// We only propagate DBG_VALUES locally here. LiveDebugValues performs a | |
| /// data-flow analysis to propagate them beyond basic block boundaries. | |
| void UserValue::extendDef(SlotIndex Idx, DbgValueLocation Loc, LiveRange *LR, | |
| const VNInfo *VNI, SmallVectorImpl<SlotIndex> *Kills, | |
| LiveIntervals &LIS) { | |
| SlotIndex Start = Idx; | |
| MachineBasicBlock *MBB = LIS.getMBBFromIndex(Start); | |
| SlotIndex Stop = LIS.getMBBEndIdx(MBB); | |
| LocMap::iterator I = locInts.find(Start); | |
| // Limit to VNI's live range. | |
| bool ToEnd = true; | |
| if (LR && VNI) { | |
| LiveInterval::Segment *Segment = LR->getSegmentContaining(Start); | |
| if (!Segment || Segment->valno != VNI) { | |
| if (Kills) | |
| Kills->push_back(Start); | |
| return; | |
| } | |
| if (Segment->end < Stop) { | |
| Stop = Segment->end; | |
| ToEnd = false; | |
| } | |
| } | |
| // There could already be a short def at Start. | |
| if (I.valid() && I.start() <= Start) { | |
| // Stop when meeting a different location or an already extended interval. | |
| Start = Start.getNextSlot(); | |
| if (I.value() != Loc || I.stop() != Start) | |
| return; | |
| // This is a one-slot placeholder. Just skip it. | |
| ++I; | |
| } | |
| // Limited by the next def. | |
| if (I.valid() && I.start() < Stop) { | |
| Stop = I.start(); | |
| ToEnd = false; | |
| } | |
| // Limited by VNI's live range. | |
| else if (!ToEnd && Kills) | |
| Kills->push_back(Stop); | |
| if (Start < Stop) | |
| I.insert(Start, Stop, Loc); | |
| } | |
| void UserValue::addDefsFromCopies( | |
| LiveInterval *LI, unsigned LocNo, bool WasIndirect, | |
| const SmallVectorImpl<SlotIndex> &Kills, | |
| SmallVectorImpl<std::pair<SlotIndex, DbgValueLocation>> &NewDefs, | |
| MachineRegisterInfo &MRI, LiveIntervals &LIS) { | |
| if (Kills.empty()) | |
| return; | |
| // Don't track copies from physregs, there are too many uses. | |
| if (!TargetRegisterInfo::isVirtualRegister(LI->reg)) | |
| return; | |
| // Collect all the (vreg, valno) pairs that are copies of LI. | |
| SmallVector<std::pair<LiveInterval*, const VNInfo*>, 8> CopyValues; | |
| for (MachineOperand &MO : MRI.use_nodbg_operands(LI->reg)) { | |
| MachineInstr *MI = MO.getParent(); | |
| // Copies of the full value. | |
| if (MO.getSubReg() || !MI->isCopy()) | |
| continue; | |
| unsigned DstReg = MI->getOperand(0).getReg(); | |
| // Don't follow copies to physregs. These are usually setting up call | |
| // arguments, and the argument registers are always call clobbered. We are | |
| // better off in the source register which could be a callee-saved register, | |
| // or it could be spilled. | |
| if (!TargetRegisterInfo::isVirtualRegister(DstReg)) | |
| continue; | |
| // Is LocNo extended to reach this copy? If not, another def may be blocking | |
| // it, or we are looking at a wrong value of LI. | |
| SlotIndex Idx = LIS.getInstructionIndex(*MI); | |
| LocMap::iterator I = locInts.find(Idx.getRegSlot(true)); | |
| if (!I.valid() || I.value().locNo() != LocNo) | |
| continue; | |
| if (!LIS.hasInterval(DstReg)) | |
| continue; | |
| LiveInterval *DstLI = &LIS.getInterval(DstReg); | |
| const VNInfo *DstVNI = DstLI->getVNInfoAt(Idx.getRegSlot()); | |
| assert(DstVNI && DstVNI->def == Idx.getRegSlot() && "Bad copy value"); | |
| CopyValues.push_back(std::make_pair(DstLI, DstVNI)); | |
| } | |
| if (CopyValues.empty()) | |
| return; | |
| LLVM_DEBUG(dbgs() << "Got " << CopyValues.size() << " copies of " << *LI | |
| << '\n'); | |
| // Try to add defs of the copied values for each kill point. | |
| for (unsigned i = 0, e = Kills.size(); i != e; ++i) { | |
| SlotIndex Idx = Kills[i]; | |
| for (unsigned j = 0, e = CopyValues.size(); j != e; ++j) { | |
| LiveInterval *DstLI = CopyValues[j].first; | |
| const VNInfo *DstVNI = CopyValues[j].second; | |
| if (DstLI->getVNInfoAt(Idx) != DstVNI) | |
| continue; | |
| // Check that there isn't already a def at Idx | |
| LocMap::iterator I = locInts.find(Idx); | |
| if (I.valid() && I.start() <= Idx) | |
| continue; | |
| LLVM_DEBUG(dbgs() << "Kill at " << Idx << " covered by valno #" | |
| << DstVNI->id << " in " << *DstLI << '\n'); | |
| MachineInstr *CopyMI = LIS.getInstructionFromIndex(DstVNI->def); | |
| assert(CopyMI && CopyMI->isCopy() && "Bad copy value"); | |
| unsigned LocNo = getLocationNo(CopyMI->getOperand(0)); | |
| DbgValueLocation NewLoc(LocNo, WasIndirect); | |
| I.insert(Idx, Idx.getNextSlot(), NewLoc); | |
| NewDefs.push_back(std::make_pair(Idx, NewLoc)); | |
| break; | |
| } | |
| } | |
| } | |
| void UserValue::computeIntervals(MachineRegisterInfo &MRI, | |
| const TargetRegisterInfo &TRI, | |
| LiveIntervals &LIS, LexicalScopes &LS) { | |
| SmallVector<std::pair<SlotIndex, DbgValueLocation>, 16> Defs; | |
| // Collect all defs to be extended (Skipping undefs). | |
| for (LocMap::const_iterator I = locInts.begin(); I.valid(); ++I) | |
| if (!I.value().isUndef()) | |
| Defs.push_back(std::make_pair(I.start(), I.value())); | |
| // Extend all defs, and possibly add new ones along the way. | |
| for (unsigned i = 0; i != Defs.size(); ++i) { | |
| SlotIndex Idx = Defs[i].first; | |
| DbgValueLocation Loc = Defs[i].second; | |
| const MachineOperand &LocMO = locations[Loc.locNo()]; | |
| if (!LocMO.isReg()) { | |
| extendDef(Idx, Loc, nullptr, nullptr, nullptr, LIS); | |
| continue; | |
| } | |
| // Register locations are constrained to where the register value is live. | |
| if (TargetRegisterInfo::isVirtualRegister(LocMO.getReg())) { | |
| LiveInterval *LI = nullptr; | |
| const VNInfo *VNI = nullptr; | |
| if (LIS.hasInterval(LocMO.getReg())) { | |
| LI = &LIS.getInterval(LocMO.getReg()); | |
| VNI = LI->getVNInfoAt(Idx); | |
| } | |
| SmallVector<SlotIndex, 16> Kills; | |
| extendDef(Idx, Loc, LI, VNI, &Kills, LIS); | |
| if (LI) | |
| addDefsFromCopies(LI, Loc.locNo(), Loc.wasIndirect(), Kills, Defs, MRI, | |
| LIS); | |
| continue; | |
| } | |
| // For physregs, we only mark the start slot idx. DwarfDebug will see it | |
| // as if the DBG_VALUE is valid up until the end of the basic block, or | |
| // the next def of the physical register. So we do not need to extend the | |
| // range. It might actually happen that the DBG_VALUE is the last use of | |
| // the physical register (e.g. if this is an unused input argument to a | |
| // function). | |
| } | |
| // The computed intervals may extend beyond the range of the debug | |
| // location's lexical scope. In this case, splitting of an interval | |
| // can result in an interval outside of the scope being created, | |
| // causing extra unnecessary DBG_VALUEs to be emitted. To prevent | |
| // this, trim the intervals to the lexical scope. | |
| LexicalScope *Scope = LS.findLexicalScope(dl); | |
| if (!Scope) | |
| return; | |
| SlotIndex PrevEnd; | |
| LocMap::iterator I = locInts.begin(); | |
| // Iterate over the lexical scope ranges. Each time round the loop | |
| // we check the intervals for overlap with the end of the previous | |
| // range and the start of the next. The first range is handled as | |
| // a special case where there is no PrevEnd. | |
| for (const InsnRange &Range : Scope->getRanges()) { | |
| SlotIndex RStart = LIS.getInstructionIndex(*Range.first); | |
| SlotIndex REnd = LIS.getInstructionIndex(*Range.second); | |
| // At the start of each iteration I has been advanced so that | |
| // I.stop() >= PrevEnd. Check for overlap. | |
| if (PrevEnd && I.start() < PrevEnd) { | |
| SlotIndex IStop = I.stop(); | |
| DbgValueLocation Loc = I.value(); | |
| // Stop overlaps previous end - trim the end of the interval to | |
| // the scope range. | |
| I.setStopUnchecked(PrevEnd); | |
| ++I; | |
| // If the interval also overlaps the start of the "next" (i.e. | |
| // current) range create a new interval for the remainder (which | |
| // may be further trimmed). | |
| if (RStart < IStop) | |
| I.insert(RStart, IStop, Loc); | |
| } | |
| // Advance I so that I.stop() >= RStart, and check for overlap. | |
| I.advanceTo(RStart); | |
| if (!I.valid()) | |
| return; | |
| if (I.start() < RStart) { | |
| // Interval start overlaps range - trim to the scope range. | |
| I.setStartUnchecked(RStart); | |
| // Remember that this interval was trimmed. | |
| trimmedDefs.insert(RStart); | |
| } | |
| // The end of a lexical scope range is the last instruction in the | |
| // range. To convert to an interval we need the index of the | |
| // instruction after it. | |
| REnd = REnd.getNextIndex(); | |
| // Advance I to first interval outside current range. | |
| I.advanceTo(REnd); | |
| if (!I.valid()) | |
| return; | |
| PrevEnd = REnd; | |
| } | |
| // Check for overlap with end of final range. | |
| if (PrevEnd && I.start() < PrevEnd) | |
| I.setStopUnchecked(PrevEnd); | |
| } | |
| void LDVImpl::computeIntervals() { | |
| LexicalScopes LS; | |
| LS.initialize(*MF); | |
| for (unsigned i = 0, e = userValues.size(); i != e; ++i) { | |
| userValues[i]->computeIntervals(MF->getRegInfo(), *TRI, *LIS, LS); | |
| userValues[i]->mapVirtRegs(this); | |
| } | |
| } | |
| bool LDVImpl::runOnMachineFunction(MachineFunction &mf) { | |
| clear(); | |
| MF = &mf; | |
| LIS = &pass.getAnalysis<LiveIntervals>(); | |
| TRI = mf.getSubtarget().getRegisterInfo(); | |
| LLVM_DEBUG(dbgs() << "********** COMPUTING LIVE DEBUG VARIABLES: " | |
| << mf.getName() << " **********\n"); | |
| bool Changed = collectDebugValues(mf); | |
| computeIntervals(); | |
| LLVM_DEBUG(print(dbgs())); | |
| ModifiedMF = Changed; | |
| return Changed; | |
| } | |
| static void removeDebugValues(MachineFunction &mf) { | |
| for (MachineBasicBlock &MBB : mf) { | |
| for (auto MBBI = MBB.begin(), MBBE = MBB.end(); MBBI != MBBE; ) { | |
| if (!MBBI->isDebugValue()) { | |
| ++MBBI; | |
| continue; | |
| } | |
| MBBI = MBB.erase(MBBI); | |
| } | |
| } | |
| } | |
| bool LiveDebugVariables::runOnMachineFunction(MachineFunction &mf) { | |
| if (!EnableLDV) | |
| return false; | |
| if (!mf.getFunction().getSubprogram()) { | |
| removeDebugValues(mf); | |
| return false; | |
| } | |
| if (!pImpl) | |
| pImpl = new LDVImpl(this); | |
| return static_cast<LDVImpl*>(pImpl)->runOnMachineFunction(mf); | |
| } | |
| void LiveDebugVariables::releaseMemory() { | |
| if (pImpl) | |
| static_cast<LDVImpl*>(pImpl)->clear(); | |
| } | |
| LiveDebugVariables::~LiveDebugVariables() { | |
| if (pImpl) | |
| delete static_cast<LDVImpl*>(pImpl); | |
| } | |
| //===----------------------------------------------------------------------===// | |
| // Live Range Splitting | |
| //===----------------------------------------------------------------------===// | |
| bool | |
| UserValue::splitLocation(unsigned OldLocNo, ArrayRef<unsigned> NewRegs, | |
| LiveIntervals& LIS) { | |
| LLVM_DEBUG({ | |
| dbgs() << "Splitting Loc" << OldLocNo << '\t'; | |
| print(dbgs(), nullptr); | |
| }); | |
| bool DidChange = false; | |
| LocMap::iterator LocMapI; | |
| LocMapI.setMap(locInts); | |
| for (unsigned i = 0; i != NewRegs.size(); ++i) { | |
| LiveInterval *LI = &LIS.getInterval(NewRegs[i]); | |
| if (LI->empty()) | |
| continue; | |
| // Don't allocate the new LocNo until it is needed. | |
| unsigned NewLocNo = UndefLocNo; | |
| // Iterate over the overlaps between locInts and LI. | |
| LocMapI.find(LI->beginIndex()); | |
| if (!LocMapI.valid()) | |
| continue; | |
| LiveInterval::iterator LII = LI->advanceTo(LI->begin(), LocMapI.start()); | |
| LiveInterval::iterator LIE = LI->end(); | |
| while (LocMapI.valid() && LII != LIE) { | |
| // At this point, we know that LocMapI.stop() > LII->start. | |
| LII = LI->advanceTo(LII, LocMapI.start()); | |
| if (LII == LIE) | |
| break; | |
| // Now LII->end > LocMapI.start(). Do we have an overlap? | |
| if (LocMapI.value().locNo() == OldLocNo && LII->start < LocMapI.stop()) { | |
| // Overlapping correct location. Allocate NewLocNo now. | |
| if (NewLocNo == UndefLocNo) { | |
| MachineOperand MO = MachineOperand::CreateReg(LI->reg, false); | |
| MO.setSubReg(locations[OldLocNo].getSubReg()); | |
| NewLocNo = getLocationNo(MO); | |
| DidChange = true; | |
| } | |
| SlotIndex LStart = LocMapI.start(); | |
| SlotIndex LStop = LocMapI.stop(); | |
| DbgValueLocation OldLoc = LocMapI.value(); | |
| // Trim LocMapI down to the LII overlap. | |
| if (LStart < LII->start) | |
| LocMapI.setStartUnchecked(LII->start); | |
| if (LStop > LII->end) | |
| LocMapI.setStopUnchecked(LII->end); | |
| // Change the value in the overlap. This may trigger coalescing. | |
| LocMapI.setValue(OldLoc.changeLocNo(NewLocNo)); | |
| // Re-insert any removed OldLocNo ranges. | |
| if (LStart < LocMapI.start()) { | |
| LocMapI.insert(LStart, LocMapI.start(), OldLoc); | |
| ++LocMapI; | |
| assert(LocMapI.valid() && "Unexpected coalescing"); | |
| } | |
| if (LStop > LocMapI.stop()) { | |
| ++LocMapI; | |
| LocMapI.insert(LII->end, LStop, OldLoc); | |
| --LocMapI; | |
| } | |
| } | |
| // Advance to the next overlap. | |
| if (LII->end < LocMapI.stop()) { | |
| if (++LII == LIE) | |
| break; | |
| LocMapI.advanceTo(LII->start); | |
| } else { | |
| ++LocMapI; | |
| if (!LocMapI.valid()) | |
| break; | |
| LII = LI->advanceTo(LII, LocMapI.start()); | |
| } | |
| } | |
| } | |
| // Finally, remove any remaining OldLocNo intervals and OldLocNo itself. | |
| locations.erase(locations.begin() + OldLocNo); | |
| LocMapI.goToBegin(); | |
| while (LocMapI.valid()) { | |
| DbgValueLocation v = LocMapI.value(); | |
| if (v.locNo() == OldLocNo) { | |
| LLVM_DEBUG(dbgs() << "Erasing [" << LocMapI.start() << ';' | |
| << LocMapI.stop() << ")\n"); | |
| LocMapI.erase(); | |
| } else { | |
| // Undef values always have location number UndefLocNo, so don't change | |
| // locNo in that case. See getLocationNo(). | |
| if (!v.isUndef() && v.locNo() > OldLocNo) | |
| LocMapI.setValueUnchecked(v.changeLocNo(v.locNo() - 1)); | |
| ++LocMapI; | |
| } | |
| } | |
| LLVM_DEBUG({ | |
| dbgs() << "Split result: \t"; | |
| print(dbgs(), nullptr); | |
| }); | |
| return DidChange; | |
| } | |
| bool | |
| UserValue::splitRegister(unsigned OldReg, ArrayRef<unsigned> NewRegs, | |
| LiveIntervals &LIS) { | |
| bool DidChange = false; | |
| // Split locations referring to OldReg. Iterate backwards so splitLocation can | |
| // safely erase unused locations. | |
| for (unsigned i = locations.size(); i ; --i) { | |
| unsigned LocNo = i-1; | |
| const MachineOperand *Loc = &locations[LocNo]; | |
| if (!Loc->isReg() || Loc->getReg() != OldReg) | |
| continue; | |
| DidChange |= splitLocation(LocNo, NewRegs, LIS); | |
| } | |
| return DidChange; | |
| } | |
| void LDVImpl::splitRegister(unsigned OldReg, ArrayRef<unsigned> NewRegs) { | |
| bool DidChange = false; | |
| for (UserValue *UV = lookupVirtReg(OldReg); UV; UV = UV->getNext()) | |
| DidChange |= UV->splitRegister(OldReg, NewRegs, *LIS); | |
| if (!DidChange) | |
| return; | |
| // Map all of the new virtual registers. | |
| UserValue *UV = lookupVirtReg(OldReg); | |
| for (unsigned i = 0; i != NewRegs.size(); ++i) | |
| mapVirtReg(NewRegs[i], UV); | |
| } | |
| void LiveDebugVariables:: | |
| splitRegister(unsigned OldReg, ArrayRef<unsigned> NewRegs, LiveIntervals &LIS) { | |
| if (pImpl) | |
| static_cast<LDVImpl*>(pImpl)->splitRegister(OldReg, NewRegs); | |
| } | |
| void UserValue::rewriteLocations(VirtRegMap &VRM, const TargetRegisterInfo &TRI, | |
| BitVector &SpilledLocations) { | |
| // Build a set of new locations with new numbers so we can coalesce our | |
| // IntervalMap if two vreg intervals collapse to the same physical location. | |
| // Use MapVector instead of SetVector because MapVector::insert returns the | |
| // position of the previously or newly inserted element. The boolean value | |
| // tracks if the location was produced by a spill. | |
| // FIXME: This will be problematic if we ever support direct and indirect | |
| // frame index locations, i.e. expressing both variables in memory and | |
| // 'int x, *px = &x'. The "spilled" bit must become part of the location. | |
| MapVector<MachineOperand, bool> NewLocations; | |
| SmallVector<unsigned, 4> LocNoMap(locations.size()); | |
| for (unsigned I = 0, E = locations.size(); I != E; ++I) { | |
| bool Spilled = false; | |
| MachineOperand Loc = locations[I]; | |
| // Only virtual registers are rewritten. | |
| if (Loc.isReg() && Loc.getReg() && | |
| TargetRegisterInfo::isVirtualRegister(Loc.getReg())) { | |
| unsigned VirtReg = Loc.getReg(); | |
| if (VRM.isAssignedReg(VirtReg) && | |
| TargetRegisterInfo::isPhysicalRegister(VRM.getPhys(VirtReg))) { | |
| // This can create a %noreg operand in rare cases when the sub-register | |
| // index is no longer available. That means the user value is in a | |
| // non-existent sub-register, and %noreg is exactly what we want. | |
| Loc.substPhysReg(VRM.getPhys(VirtReg), TRI); | |
| } else if (VRM.getStackSlot(VirtReg) != VirtRegMap::NO_STACK_SLOT) { | |
| // FIXME: Translate SubIdx to a stackslot offset. | |
| Loc = MachineOperand::CreateFI(VRM.getStackSlot(VirtReg)); | |
| Spilled = true; | |
| } else { | |
| Loc.setReg(0); | |
| Loc.setSubReg(0); | |
| } | |
| } | |
| // Insert this location if it doesn't already exist and record a mapping | |
| // from the old number to the new number. | |
| auto InsertResult = NewLocations.insert({Loc, Spilled}); | |
| unsigned NewLocNo = std::distance(NewLocations.begin(), InsertResult.first); | |
| LocNoMap[I] = NewLocNo; | |
| } | |
| // Rewrite the locations and record which ones were spill slots. | |
| locations.clear(); | |
| SpilledLocations.clear(); | |
| SpilledLocations.resize(NewLocations.size()); | |
| for (auto &Pair : NewLocations) { | |
| locations.push_back(Pair.first); | |
| if (Pair.second) { | |
| unsigned NewLocNo = std::distance(&*NewLocations.begin(), &Pair); | |
| SpilledLocations.set(NewLocNo); | |
| } | |
| } | |
| // Update the interval map, but only coalesce left, since intervals to the | |
| // right use the old location numbers. This should merge two contiguous | |
| // DBG_VALUE intervals with different vregs that were allocated to the same | |
| // physical register. | |
| for (LocMap::iterator I = locInts.begin(); I.valid(); ++I) { | |
| DbgValueLocation Loc = I.value(); | |
| // Undef values don't exist in locations (and thus not in LocNoMap either) | |
| // so skip over them. See getLocationNo(). | |
| if (Loc.isUndef()) | |
| continue; | |
| unsigned NewLocNo = LocNoMap[Loc.locNo()]; | |
| I.setValueUnchecked(Loc.changeLocNo(NewLocNo)); | |
| I.setStart(I.start()); | |
| } | |
| } | |
| /// Find an iterator for inserting a DBG_VALUE instruction. | |
| static MachineBasicBlock::iterator | |
| findInsertLocation(MachineBasicBlock *MBB, SlotIndex Idx, | |
| LiveIntervals &LIS) { | |
| SlotIndex Start = LIS.getMBBStartIdx(MBB); | |
| Idx = Idx.getBaseIndex(); | |
| // Try to find an insert location by going backwards from Idx. | |
| MachineInstr *MI; | |
| while (!(MI = LIS.getInstructionFromIndex(Idx))) { | |
| // We've reached the beginning of MBB. | |
| if (Idx == Start) { | |
| MachineBasicBlock::iterator I = MBB->SkipPHIsLabelsAndDebug(MBB->begin()); | |
| return I; | |
| } | |
| Idx = Idx.getPrevIndex(); | |
| } | |
| // Don't insert anything after the first terminator, though. | |
| return MI->isTerminator() ? MBB->getFirstTerminator() : | |
| std::next(MachineBasicBlock::iterator(MI)); | |
| } | |
| /// Find an iterator for inserting the next DBG_VALUE instruction | |
| /// (or end if no more insert locations found). | |
| static MachineBasicBlock::iterator | |
| findNextInsertLocation(MachineBasicBlock *MBB, | |
| MachineBasicBlock::iterator I, | |
| SlotIndex StopIdx, MachineOperand &LocMO, | |
| LiveIntervals &LIS, | |
| const TargetRegisterInfo &TRI) { | |
| if (!LocMO.isReg()) | |
| return MBB->instr_end(); | |
| unsigned Reg = LocMO.getReg(); | |
| // Find the next instruction in the MBB that define the register Reg. | |
| while (I != MBB->end() && !I->isTerminator()) { | |
| if (!LIS.isNotInMIMap(*I) && | |
| SlotIndex::isEarlierEqualInstr(StopIdx, LIS.getInstructionIndex(*I))) | |
| break; | |
| if (I->definesRegister(Reg, &TRI)) | |
| // The insert location is directly after the instruction/bundle. | |
| return std::next(I); | |
| ++I; | |
| } | |
| return MBB->end(); | |
| } | |
| void UserValue::insertDebugValue(MachineBasicBlock *MBB, SlotIndex StartIdx, | |
| SlotIndex StopIdx, | |
| DbgValueLocation Loc, bool Spilled, | |
| LiveIntervals &LIS, | |
| const TargetInstrInfo &TII, | |
| const TargetRegisterInfo &TRI) { | |
| SlotIndex MBBEndIdx = LIS.getMBBEndIdx(&*MBB); | |
| // Only search within the current MBB. | |
| StopIdx = (MBBEndIdx < StopIdx) ? MBBEndIdx : StopIdx; | |
| MachineBasicBlock::iterator I = findInsertLocation(MBB, StartIdx, LIS); | |
| // Undef values don't exist in locations so create new "noreg" register MOs | |
| // for them. See getLocationNo(). | |
| MachineOperand MO = !Loc.isUndef() ? | |
| locations[Loc.locNo()] : | |
| MachineOperand::CreateReg(/* Reg */ 0, /* isDef */ false, /* isImp */ false, | |
| /* isKill */ false, /* isDead */ false, | |
| /* isUndef */ false, /* isEarlyClobber */ false, | |
| /* SubReg */ 0, /* isDebug */ true); | |
| ++NumInsertedDebugValues; | |
| assert(cast<DILocalVariable>(Variable) | |
| ->isValidLocationForIntrinsic(getDebugLoc()) && | |
| "Expected inlined-at fields to agree"); | |
| // If the location was spilled, the new DBG_VALUE will be indirect. If the | |
| // original DBG_VALUE was indirect, we need to add DW_OP_deref to indicate | |
| // that the original virtual register was a pointer. | |
| const DIExpression *Expr = Expression; | |
| bool IsIndirect = Loc.wasIndirect(); | |
| if (Spilled) { | |
| if (IsIndirect) | |
| Expr = DIExpression::prepend(Expr, DIExpression::WithDeref); | |
| IsIndirect = true; | |
| } | |
| assert((!Spilled || MO.isFI()) && "a spilled location must be a frame index"); | |
| do { | |
| BuildMI(*MBB, I, getDebugLoc(), TII.get(TargetOpcode::DBG_VALUE), | |
| IsIndirect, MO, Variable, Expr); | |
| // Continue and insert DBG_VALUES after every redefinition of register | |
| // associated with the debug value within the range | |
| I = findNextInsertLocation(MBB, I, StopIdx, MO, LIS, TRI); | |
| } while (I != MBB->end()); | |
| } | |
| void UserValue::emitDebugValues(VirtRegMap *VRM, LiveIntervals &LIS, | |
| const TargetInstrInfo &TII, | |
| const TargetRegisterInfo &TRI, | |
| const BitVector &SpilledLocations) { | |
| MachineFunction::iterator MFEnd = VRM->getMachineFunction().end(); | |
| for (LocMap::const_iterator I = locInts.begin(); I.valid();) { | |
| SlotIndex Start = I.start(); | |
| SlotIndex Stop = I.stop(); | |
| DbgValueLocation Loc = I.value(); | |
| bool Spilled = !Loc.isUndef() ? SpilledLocations.test(Loc.locNo()) : false; | |
| // If the interval start was trimmed to the lexical scope insert the | |
| // DBG_VALUE at the previous index (otherwise it appears after the | |
| // first instruction in the range). | |
| if (trimmedDefs.count(Start)) | |
| Start = Start.getPrevIndex(); | |
| LLVM_DEBUG(dbgs() << "\t[" << Start << ';' << Stop << "):" << Loc.locNo()); | |
| MachineFunction::iterator MBB = LIS.getMBBFromIndex(Start)->getIterator(); | |
| SlotIndex MBBEnd = LIS.getMBBEndIdx(&*MBB); | |
| LLVM_DEBUG(dbgs() << ' ' << printMBBReference(*MBB) << '-' << MBBEnd); | |
| insertDebugValue(&*MBB, Start, Stop, Loc, Spilled, LIS, TII, TRI); | |
| // This interval may span multiple basic blocks. | |
| // Insert a DBG_VALUE into each one. | |
| while (Stop > MBBEnd) { | |
| // Move to the next block. | |
| Start = MBBEnd; | |
| if (++MBB == MFEnd) | |
| break; | |
| MBBEnd = LIS.getMBBEndIdx(&*MBB); | |
| LLVM_DEBUG(dbgs() << ' ' << printMBBReference(*MBB) << '-' << MBBEnd); | |
| insertDebugValue(&*MBB, Start, Stop, Loc, Spilled, LIS, TII, TRI); | |
| } | |
| LLVM_DEBUG(dbgs() << '\n'); | |
| if (MBB == MFEnd) | |
| break; | |
| ++I; | |
| } | |
| } | |
| void LDVImpl::emitDebugValues(VirtRegMap *VRM) { | |
| LLVM_DEBUG(dbgs() << "********** EMITTING LIVE DEBUG VARIABLES **********\n"); | |
| if (!MF) | |
| return; | |
| const TargetInstrInfo *TII = MF->getSubtarget().getInstrInfo(); | |
| BitVector SpilledLocations; | |
| for (unsigned i = 0, e = userValues.size(); i != e; ++i) { | |
| LLVM_DEBUG(userValues[i]->print(dbgs(), TRI)); | |
| userValues[i]->rewriteLocations(*VRM, *TRI, SpilledLocations); | |
| userValues[i]->emitDebugValues(VRM, *LIS, *TII, *TRI, SpilledLocations); | |
| } | |
| EmitDone = true; | |
| } | |
| void LiveDebugVariables::emitDebugValues(VirtRegMap *VRM) { | |
| if (pImpl) | |
| static_cast<LDVImpl*>(pImpl)->emitDebugValues(VRM); | |
| } | |
| bool LiveDebugVariables::doInitialization(Module &M) { | |
| return Pass::doInitialization(M); | |
| } | |
| #if !defined(NDEBUG) || defined(LLVM_ENABLE_DUMP) | |
| LLVM_DUMP_METHOD void LiveDebugVariables::dump() const { | |
| if (pImpl) | |
| static_cast<LDVImpl*>(pImpl)->print(dbgs()); | |
| } | |
| #endif |