| //===- CFLAndersAliasAnalysis.cpp - Unification-based Alias Analysis ------===// | |
| // | |
| // The LLVM Compiler Infrastructure | |
| // | |
| // This file is distributed under the University of Illinois Open Source | |
| // License. See LICENSE.TXT for details. | |
| // | |
| //===----------------------------------------------------------------------===// | |
| // | |
| // This file implements a CFL-based, summary-based alias analysis algorithm. It | |
| // differs from CFLSteensAliasAnalysis in its inclusion-based nature while | |
| // CFLSteensAliasAnalysis is unification-based. This pass has worse performance | |
| // than CFLSteensAliasAnalysis (the worst case complexity of | |
| // CFLAndersAliasAnalysis is cubic, while the worst case complexity of | |
| // CFLSteensAliasAnalysis is almost linear), but it is able to yield more | |
| // precise analysis result. The precision of this analysis is roughly the same | |
| // as that of an one level context-sensitive Andersen's algorithm. | |
| // | |
| // The algorithm used here is based on recursive state machine matching scheme | |
| // proposed in "Demand-driven alias analysis for C" by Xin Zheng and Radu | |
| // Rugina. The general idea is to extend the traditional transitive closure | |
| // algorithm to perform CFL matching along the way: instead of recording | |
| // "whether X is reachable from Y", we keep track of "whether X is reachable | |
| // from Y at state Z", where the "state" field indicates where we are in the CFL | |
| // matching process. To understand the matching better, it is advisable to have | |
| // the state machine shown in Figure 3 of the paper available when reading the | |
| // codes: all we do here is to selectively expand the transitive closure by | |
| // discarding edges that are not recognized by the state machine. | |
| // | |
| // There are two differences between our current implementation and the one | |
| // described in the paper: | |
| // - Our algorithm eagerly computes all alias pairs after the CFLGraph is built, | |
| // while in the paper the authors did the computation in a demand-driven | |
| // fashion. We did not implement the demand-driven algorithm due to the | |
| // additional coding complexity and higher memory profile, but if we found it | |
| // necessary we may switch to it eventually. | |
| // - In the paper the authors use a state machine that does not distinguish | |
| // value reads from value writes. For example, if Y is reachable from X at state | |
| // S3, it may be the case that X is written into Y, or it may be the case that | |
| // there's a third value Z that writes into both X and Y. To make that | |
| // distinction (which is crucial in building function summary as well as | |
| // retrieving mod-ref info), we choose to duplicate some of the states in the | |
| // paper's proposed state machine. The duplication does not change the set the | |
| // machine accepts. Given a pair of reachable values, it only provides more | |
| // detailed information on which value is being written into and which is being | |
| // read from. | |
| // | |
| //===----------------------------------------------------------------------===// | |
| // N.B. AliasAnalysis as a whole is phrased as a FunctionPass at the moment, and | |
| // CFLAndersAA is interprocedural. This is *technically* A Bad Thing, because | |
| // FunctionPasses are only allowed to inspect the Function that they're being | |
| // run on. Realistically, this likely isn't a problem until we allow | |
| // FunctionPasses to run concurrently. | |
| #include "llvm/Analysis/CFLAndersAliasAnalysis.h" | |
| #include "AliasAnalysisSummary.h" | |
| #include "CFLGraph.h" | |
| #include "llvm/ADT/DenseMap.h" | |
| #include "llvm/ADT/DenseMapInfo.h" | |
| #include "llvm/ADT/DenseSet.h" | |
| #include "llvm/ADT/None.h" | |
| #include "llvm/ADT/Optional.h" | |
| #include "llvm/ADT/STLExtras.h" | |
| #include "llvm/ADT/SmallVector.h" | |
| #include "llvm/ADT/iterator_range.h" | |
| #include "llvm/Analysis/AliasAnalysis.h" | |
| #include "llvm/Analysis/MemoryLocation.h" | |
| #include "llvm/IR/Argument.h" | |
| #include "llvm/IR/Function.h" | |
| #include "llvm/IR/PassManager.h" | |
| #include "llvm/IR/Type.h" | |
| #include "llvm/Pass.h" | |
| #include "llvm/Support/Casting.h" | |
| #include "llvm/Support/Compiler.h" | |
| #include "llvm/Support/Debug.h" | |
| #include "llvm/Support/raw_ostream.h" | |
| #include <algorithm> | |
| #include <bitset> | |
| #include <cassert> | |
| #include <cstddef> | |
| #include <cstdint> | |
| #include <functional> | |
| #include <utility> | |
| #include <vector> | |
| using namespace llvm; | |
| using namespace llvm::cflaa; | |
| #define DEBUG_TYPE "cfl-anders-aa" | |
| CFLAndersAAResult::CFLAndersAAResult(const TargetLibraryInfo &TLI) : TLI(TLI) {} | |
| CFLAndersAAResult::CFLAndersAAResult(CFLAndersAAResult &&RHS) | |
| : AAResultBase(std::move(RHS)), TLI(RHS.TLI) {} | |
| CFLAndersAAResult::~CFLAndersAAResult() = default; | |
| namespace { | |
| enum class MatchState : uint8_t { | |
| // The following state represents S1 in the paper. | |
| FlowFromReadOnly = 0, | |
| // The following two states together represent S2 in the paper. | |
| // The 'NoReadWrite' suffix indicates that there exists an alias path that | |
| // does not contain assignment and reverse assignment edges. | |
| // The 'ReadOnly' suffix indicates that there exists an alias path that | |
| // contains reverse assignment edges only. | |
| FlowFromMemAliasNoReadWrite, | |
| FlowFromMemAliasReadOnly, | |
| // The following two states together represent S3 in the paper. | |
| // The 'WriteOnly' suffix indicates that there exists an alias path that | |
| // contains assignment edges only. | |
| // The 'ReadWrite' suffix indicates that there exists an alias path that | |
| // contains both assignment and reverse assignment edges. Note that if X and Y | |
| // are reachable at 'ReadWrite' state, it does NOT mean X is both read from | |
| // and written to Y. Instead, it means that a third value Z is written to both | |
| // X and Y. | |
| FlowToWriteOnly, | |
| FlowToReadWrite, | |
| // The following two states together represent S4 in the paper. | |
| FlowToMemAliasWriteOnly, | |
| FlowToMemAliasReadWrite, | |
| }; | |
| using StateSet = std::bitset<7>; | |
| const unsigned ReadOnlyStateMask = | |
| (1U << static_cast<uint8_t>(MatchState::FlowFromReadOnly)) | | |
| (1U << static_cast<uint8_t>(MatchState::FlowFromMemAliasReadOnly)); | |
| const unsigned WriteOnlyStateMask = | |
| (1U << static_cast<uint8_t>(MatchState::FlowToWriteOnly)) | | |
| (1U << static_cast<uint8_t>(MatchState::FlowToMemAliasWriteOnly)); | |
| // A pair that consists of a value and an offset | |
| struct OffsetValue { | |
| const Value *Val; | |
| int64_t Offset; | |
| }; | |
| bool operator==(OffsetValue LHS, OffsetValue RHS) { | |
| return LHS.Val == RHS.Val && LHS.Offset == RHS.Offset; | |
| } | |
| bool operator<(OffsetValue LHS, OffsetValue RHS) { | |
| return std::less<const Value *>()(LHS.Val, RHS.Val) || | |
| (LHS.Val == RHS.Val && LHS.Offset < RHS.Offset); | |
| } | |
| // A pair that consists of an InstantiatedValue and an offset | |
| struct OffsetInstantiatedValue { | |
| InstantiatedValue IVal; | |
| int64_t Offset; | |
| }; | |
| bool operator==(OffsetInstantiatedValue LHS, OffsetInstantiatedValue RHS) { | |
| return LHS.IVal == RHS.IVal && LHS.Offset == RHS.Offset; | |
| } | |
| // We use ReachabilitySet to keep track of value aliases (The nonterminal "V" in | |
| // the paper) during the analysis. | |
| class ReachabilitySet { | |
| using ValueStateMap = DenseMap<InstantiatedValue, StateSet>; | |
| using ValueReachMap = DenseMap<InstantiatedValue, ValueStateMap>; | |
| ValueReachMap ReachMap; | |
| public: | |
| using const_valuestate_iterator = ValueStateMap::const_iterator; | |
| using const_value_iterator = ValueReachMap::const_iterator; | |
| // Insert edge 'From->To' at state 'State' | |
| bool insert(InstantiatedValue From, InstantiatedValue To, MatchState State) { | |
| assert(From != To); | |
| auto &States = ReachMap[To][From]; | |
| auto Idx = static_cast<size_t>(State); | |
| if (!States.test(Idx)) { | |
| States.set(Idx); | |
| return true; | |
| } | |
| return false; | |
| } | |
| // Return the set of all ('From', 'State') pair for a given node 'To' | |
| iterator_range<const_valuestate_iterator> | |
| reachableValueAliases(InstantiatedValue V) const { | |
| auto Itr = ReachMap.find(V); | |
| if (Itr == ReachMap.end()) | |
| return make_range<const_valuestate_iterator>(const_valuestate_iterator(), | |
| const_valuestate_iterator()); | |
| return make_range<const_valuestate_iterator>(Itr->second.begin(), | |
| Itr->second.end()); | |
| } | |
| iterator_range<const_value_iterator> value_mappings() const { | |
| return make_range<const_value_iterator>(ReachMap.begin(), ReachMap.end()); | |
| } | |
| }; | |
| // We use AliasMemSet to keep track of all memory aliases (the nonterminal "M" | |
| // in the paper) during the analysis. | |
| class AliasMemSet { | |
| using MemSet = DenseSet<InstantiatedValue>; | |
| using MemMapType = DenseMap<InstantiatedValue, MemSet>; | |
| MemMapType MemMap; | |
| public: | |
| using const_mem_iterator = MemSet::const_iterator; | |
| bool insert(InstantiatedValue LHS, InstantiatedValue RHS) { | |
| // Top-level values can never be memory aliases because one cannot take the | |
| // addresses of them | |
| assert(LHS.DerefLevel > 0 && RHS.DerefLevel > 0); | |
| return MemMap[LHS].insert(RHS).second; | |
| } | |
| const MemSet *getMemoryAliases(InstantiatedValue V) const { | |
| auto Itr = MemMap.find(V); | |
| if (Itr == MemMap.end()) | |
| return nullptr; | |
| return &Itr->second; | |
| } | |
| }; | |
| // We use AliasAttrMap to keep track of the AliasAttr of each node. | |
| class AliasAttrMap { | |
| using MapType = DenseMap<InstantiatedValue, AliasAttrs>; | |
| MapType AttrMap; | |
| public: | |
| using const_iterator = MapType::const_iterator; | |
| bool add(InstantiatedValue V, AliasAttrs Attr) { | |
| auto &OldAttr = AttrMap[V]; | |
| auto NewAttr = OldAttr | Attr; | |
| if (OldAttr == NewAttr) | |
| return false; | |
| OldAttr = NewAttr; | |
| return true; | |
| } | |
| AliasAttrs getAttrs(InstantiatedValue V) const { | |
| AliasAttrs Attr; | |
| auto Itr = AttrMap.find(V); | |
| if (Itr != AttrMap.end()) | |
| Attr = Itr->second; | |
| return Attr; | |
| } | |
| iterator_range<const_iterator> mappings() const { | |
| return make_range<const_iterator>(AttrMap.begin(), AttrMap.end()); | |
| } | |
| }; | |
| struct WorkListItem { | |
| InstantiatedValue From; | |
| InstantiatedValue To; | |
| MatchState State; | |
| }; | |
| struct ValueSummary { | |
| struct Record { | |
| InterfaceValue IValue; | |
| unsigned DerefLevel; | |
| }; | |
| SmallVector<Record, 4> FromRecords, ToRecords; | |
| }; | |
| } // end anonymous namespace | |
| namespace llvm { | |
| // Specialize DenseMapInfo for OffsetValue. | |
| template <> struct DenseMapInfo<OffsetValue> { | |
| static OffsetValue getEmptyKey() { | |
| return OffsetValue{DenseMapInfo<const Value *>::getEmptyKey(), | |
| DenseMapInfo<int64_t>::getEmptyKey()}; | |
| } | |
| static OffsetValue getTombstoneKey() { | |
| return OffsetValue{DenseMapInfo<const Value *>::getTombstoneKey(), | |
| DenseMapInfo<int64_t>::getEmptyKey()}; | |
| } | |
| static unsigned getHashValue(const OffsetValue &OVal) { | |
| return DenseMapInfo<std::pair<const Value *, int64_t>>::getHashValue( | |
| std::make_pair(OVal.Val, OVal.Offset)); | |
| } | |
| static bool isEqual(const OffsetValue &LHS, const OffsetValue &RHS) { | |
| return LHS == RHS; | |
| } | |
| }; | |
| // Specialize DenseMapInfo for OffsetInstantiatedValue. | |
| template <> struct DenseMapInfo<OffsetInstantiatedValue> { | |
| static OffsetInstantiatedValue getEmptyKey() { | |
| return OffsetInstantiatedValue{ | |
| DenseMapInfo<InstantiatedValue>::getEmptyKey(), | |
| DenseMapInfo<int64_t>::getEmptyKey()}; | |
| } | |
| static OffsetInstantiatedValue getTombstoneKey() { | |
| return OffsetInstantiatedValue{ | |
| DenseMapInfo<InstantiatedValue>::getTombstoneKey(), | |
| DenseMapInfo<int64_t>::getEmptyKey()}; | |
| } | |
| static unsigned getHashValue(const OffsetInstantiatedValue &OVal) { | |
| return DenseMapInfo<std::pair<InstantiatedValue, int64_t>>::getHashValue( | |
| std::make_pair(OVal.IVal, OVal.Offset)); | |
| } | |
| static bool isEqual(const OffsetInstantiatedValue &LHS, | |
| const OffsetInstantiatedValue &RHS) { | |
| return LHS == RHS; | |
| } | |
| }; | |
| } // end namespace llvm | |
| class CFLAndersAAResult::FunctionInfo { | |
| /// Map a value to other values that may alias it | |
| /// Since the alias relation is symmetric, to save some space we assume values | |
| /// are properly ordered: if a and b alias each other, and a < b, then b is in | |
| /// AliasMap[a] but not vice versa. | |
| DenseMap<const Value *, std::vector<OffsetValue>> AliasMap; | |
| /// Map a value to its corresponding AliasAttrs | |
| DenseMap<const Value *, AliasAttrs> AttrMap; | |
| /// Summary of externally visible effects. | |
| AliasSummary Summary; | |
| Optional<AliasAttrs> getAttrs(const Value *) const; | |
| public: | |
| FunctionInfo(const Function &, const SmallVectorImpl<Value *> &, | |
| const ReachabilitySet &, const AliasAttrMap &); | |
| bool mayAlias(const Value *, LocationSize, const Value *, LocationSize) const; | |
| const AliasSummary &getAliasSummary() const { return Summary; } | |
| }; | |
| static bool hasReadOnlyState(StateSet Set) { | |
| return (Set & StateSet(ReadOnlyStateMask)).any(); | |
| } | |
| static bool hasWriteOnlyState(StateSet Set) { | |
| return (Set & StateSet(WriteOnlyStateMask)).any(); | |
| } | |
| static Optional<InterfaceValue> | |
| getInterfaceValue(InstantiatedValue IValue, | |
| const SmallVectorImpl<Value *> &RetVals) { | |
| auto Val = IValue.Val; | |
| Optional<unsigned> Index; | |
| if (auto Arg = dyn_cast<Argument>(Val)) | |
| Index = Arg->getArgNo() + 1; | |
| else if (is_contained(RetVals, Val)) | |
| Index = 0; | |
| if (Index) | |
| return InterfaceValue{*Index, IValue.DerefLevel}; | |
| return None; | |
| } | |
| static void populateAttrMap(DenseMap<const Value *, AliasAttrs> &AttrMap, | |
| const AliasAttrMap &AMap) { | |
| for (const auto &Mapping : AMap.mappings()) { | |
| auto IVal = Mapping.first; | |
| // Insert IVal into the map | |
| auto &Attr = AttrMap[IVal.Val]; | |
| // AttrMap only cares about top-level values | |
| if (IVal.DerefLevel == 0) | |
| Attr |= Mapping.second; | |
| } | |
| } | |
| static void | |
| populateAliasMap(DenseMap<const Value *, std::vector<OffsetValue>> &AliasMap, | |
| const ReachabilitySet &ReachSet) { | |
| for (const auto &OuterMapping : ReachSet.value_mappings()) { | |
| // AliasMap only cares about top-level values | |
| if (OuterMapping.first.DerefLevel > 0) | |
| continue; | |
| auto Val = OuterMapping.first.Val; | |
| auto &AliasList = AliasMap[Val]; | |
| for (const auto &InnerMapping : OuterMapping.second) { | |
| // Again, AliasMap only cares about top-level values | |
| if (InnerMapping.first.DerefLevel == 0) | |
| AliasList.push_back(OffsetValue{InnerMapping.first.Val, UnknownOffset}); | |
| } | |
| // Sort AliasList for faster lookup | |
| llvm::sort(AliasList.begin(), AliasList.end()); | |
| } | |
| } | |
| static void populateExternalRelations( | |
| SmallVectorImpl<ExternalRelation> &ExtRelations, const Function &Fn, | |
| const SmallVectorImpl<Value *> &RetVals, const ReachabilitySet &ReachSet) { | |
| // If a function only returns one of its argument X, then X will be both an | |
| // argument and a return value at the same time. This is an edge case that | |
| // needs special handling here. | |
| for (const auto &Arg : Fn.args()) { | |
| if (is_contained(RetVals, &Arg)) { | |
| auto ArgVal = InterfaceValue{Arg.getArgNo() + 1, 0}; | |
| auto RetVal = InterfaceValue{0, 0}; | |
| ExtRelations.push_back(ExternalRelation{ArgVal, RetVal, 0}); | |
| } | |
| } | |
| // Below is the core summary construction logic. | |
| // A naive solution of adding only the value aliases that are parameters or | |
| // return values in ReachSet to the summary won't work: It is possible that a | |
| // parameter P is written into an intermediate value I, and the function | |
| // subsequently returns *I. In that case, *I is does not value alias anything | |
| // in ReachSet, and the naive solution will miss a summary edge from (P, 1) to | |
| // (I, 1). | |
| // To account for the aforementioned case, we need to check each non-parameter | |
| // and non-return value for the possibility of acting as an intermediate. | |
| // 'ValueMap' here records, for each value, which InterfaceValues read from or | |
| // write into it. If both the read list and the write list of a given value | |
| // are non-empty, we know that a particular value is an intermidate and we | |
| // need to add summary edges from the writes to the reads. | |
| DenseMap<Value *, ValueSummary> ValueMap; | |
| for (const auto &OuterMapping : ReachSet.value_mappings()) { | |
| if (auto Dst = getInterfaceValue(OuterMapping.first, RetVals)) { | |
| for (const auto &InnerMapping : OuterMapping.second) { | |
| // If Src is a param/return value, we get a same-level assignment. | |
| if (auto Src = getInterfaceValue(InnerMapping.first, RetVals)) { | |
| // This may happen if both Dst and Src are return values | |
| if (*Dst == *Src) | |
| continue; | |
| if (hasReadOnlyState(InnerMapping.second)) | |
| ExtRelations.push_back(ExternalRelation{*Dst, *Src, UnknownOffset}); | |
| // No need to check for WriteOnly state, since ReachSet is symmetric | |
| } else { | |
| // If Src is not a param/return, add it to ValueMap | |
| auto SrcIVal = InnerMapping.first; | |
| if (hasReadOnlyState(InnerMapping.second)) | |
| ValueMap[SrcIVal.Val].FromRecords.push_back( | |
| ValueSummary::Record{*Dst, SrcIVal.DerefLevel}); | |
| if (hasWriteOnlyState(InnerMapping.second)) | |
| ValueMap[SrcIVal.Val].ToRecords.push_back( | |
| ValueSummary::Record{*Dst, SrcIVal.DerefLevel}); | |
| } | |
| } | |
| } | |
| } | |
| for (const auto &Mapping : ValueMap) { | |
| for (const auto &FromRecord : Mapping.second.FromRecords) { | |
| for (const auto &ToRecord : Mapping.second.ToRecords) { | |
| auto ToLevel = ToRecord.DerefLevel; | |
| auto FromLevel = FromRecord.DerefLevel; | |
| // Same-level assignments should have already been processed by now | |
| if (ToLevel == FromLevel) | |
| continue; | |
| auto SrcIndex = FromRecord.IValue.Index; | |
| auto SrcLevel = FromRecord.IValue.DerefLevel; | |
| auto DstIndex = ToRecord.IValue.Index; | |
| auto DstLevel = ToRecord.IValue.DerefLevel; | |
| if (ToLevel > FromLevel) | |
| SrcLevel += ToLevel - FromLevel; | |
| else | |
| DstLevel += FromLevel - ToLevel; | |
| ExtRelations.push_back(ExternalRelation{ | |
| InterfaceValue{SrcIndex, SrcLevel}, | |
| InterfaceValue{DstIndex, DstLevel}, UnknownOffset}); | |
| } | |
| } | |
| } | |
| // Remove duplicates in ExtRelations | |
| llvm::sort(ExtRelations.begin(), ExtRelations.end()); | |
| ExtRelations.erase(std::unique(ExtRelations.begin(), ExtRelations.end()), | |
| ExtRelations.end()); | |
| } | |
| static void populateExternalAttributes( | |
| SmallVectorImpl<ExternalAttribute> &ExtAttributes, const Function &Fn, | |
| const SmallVectorImpl<Value *> &RetVals, const AliasAttrMap &AMap) { | |
| for (const auto &Mapping : AMap.mappings()) { | |
| if (auto IVal = getInterfaceValue(Mapping.first, RetVals)) { | |
| auto Attr = getExternallyVisibleAttrs(Mapping.second); | |
| if (Attr.any()) | |
| ExtAttributes.push_back(ExternalAttribute{*IVal, Attr}); | |
| } | |
| } | |
| } | |
| CFLAndersAAResult::FunctionInfo::FunctionInfo( | |
| const Function &Fn, const SmallVectorImpl<Value *> &RetVals, | |
| const ReachabilitySet &ReachSet, const AliasAttrMap &AMap) { | |
| populateAttrMap(AttrMap, AMap); | |
| populateExternalAttributes(Summary.RetParamAttributes, Fn, RetVals, AMap); | |
| populateAliasMap(AliasMap, ReachSet); | |
| populateExternalRelations(Summary.RetParamRelations, Fn, RetVals, ReachSet); | |
| } | |
| Optional<AliasAttrs> | |
| CFLAndersAAResult::FunctionInfo::getAttrs(const Value *V) const { | |
| assert(V != nullptr); | |
| auto Itr = AttrMap.find(V); | |
| if (Itr != AttrMap.end()) | |
| return Itr->second; | |
| return None; | |
| } | |
| bool CFLAndersAAResult::FunctionInfo::mayAlias(const Value *LHS, | |
| LocationSize LHSSize, | |
| const Value *RHS, | |
| LocationSize RHSSize) const { | |
| assert(LHS && RHS); | |
| // Check if we've seen LHS and RHS before. Sometimes LHS or RHS can be created | |
| // after the analysis gets executed, and we want to be conservative in those | |
| // cases. | |
| auto MaybeAttrsA = getAttrs(LHS); | |
| auto MaybeAttrsB = getAttrs(RHS); | |
| if (!MaybeAttrsA || !MaybeAttrsB) | |
| return true; | |
| // Check AliasAttrs before AliasMap lookup since it's cheaper | |
| auto AttrsA = *MaybeAttrsA; | |
| auto AttrsB = *MaybeAttrsB; | |
| if (hasUnknownOrCallerAttr(AttrsA)) | |
| return AttrsB.any(); | |
| if (hasUnknownOrCallerAttr(AttrsB)) | |
| return AttrsA.any(); | |
| if (isGlobalOrArgAttr(AttrsA)) | |
| return isGlobalOrArgAttr(AttrsB); | |
| if (isGlobalOrArgAttr(AttrsB)) | |
| return isGlobalOrArgAttr(AttrsA); | |
| // At this point both LHS and RHS should point to locally allocated objects | |
| auto Itr = AliasMap.find(LHS); | |
| if (Itr != AliasMap.end()) { | |
| // Find out all (X, Offset) where X == RHS | |
| auto Comparator = [](OffsetValue LHS, OffsetValue RHS) { | |
| return std::less<const Value *>()(LHS.Val, RHS.Val); | |
| }; | |
| #ifdef EXPENSIVE_CHECKS | |
| assert(std::is_sorted(Itr->second.begin(), Itr->second.end(), Comparator)); | |
| #endif | |
| auto RangePair = std::equal_range(Itr->second.begin(), Itr->second.end(), | |
| OffsetValue{RHS, 0}, Comparator); | |
| if (RangePair.first != RangePair.second) { | |
| // Be conservative about UnknownSize | |
| if (LHSSize == MemoryLocation::UnknownSize || | |
| RHSSize == MemoryLocation::UnknownSize) | |
| return true; | |
| for (const auto &OVal : make_range(RangePair)) { | |
| // Be conservative about UnknownOffset | |
| if (OVal.Offset == UnknownOffset) | |
| return true; | |
| // We know that LHS aliases (RHS + OVal.Offset) if the control flow | |
| // reaches here. The may-alias query essentially becomes integer | |
| // range-overlap queries over two ranges [OVal.Offset, OVal.Offset + | |
| // LHSSize) and [0, RHSSize). | |
| // Try to be conservative on super large offsets | |
| if (LLVM_UNLIKELY(LHSSize > INT64_MAX || RHSSize > INT64_MAX)) | |
| return true; | |
| auto LHSStart = OVal.Offset; | |
| // FIXME: Do we need to guard against integer overflow? | |
| auto LHSEnd = OVal.Offset + static_cast<int64_t>(LHSSize); | |
| auto RHSStart = 0; | |
| auto RHSEnd = static_cast<int64_t>(RHSSize); | |
| if (LHSEnd > RHSStart && LHSStart < RHSEnd) | |
| return true; | |
| } | |
| } | |
| } | |
| return false; | |
| } | |
| static void propagate(InstantiatedValue From, InstantiatedValue To, | |
| MatchState State, ReachabilitySet &ReachSet, | |
| std::vector<WorkListItem> &WorkList) { | |
| if (From == To) | |
| return; | |
| if (ReachSet.insert(From, To, State)) | |
| WorkList.push_back(WorkListItem{From, To, State}); | |
| } | |
| static void initializeWorkList(std::vector<WorkListItem> &WorkList, | |
| ReachabilitySet &ReachSet, | |
| const CFLGraph &Graph) { | |
| for (const auto &Mapping : Graph.value_mappings()) { | |
| auto Val = Mapping.first; | |
| auto &ValueInfo = Mapping.second; | |
| assert(ValueInfo.getNumLevels() > 0); | |
| // Insert all immediate assignment neighbors to the worklist | |
| for (unsigned I = 0, E = ValueInfo.getNumLevels(); I < E; ++I) { | |
| auto Src = InstantiatedValue{Val, I}; | |
| // If there's an assignment edge from X to Y, it means Y is reachable from | |
| // X at S2 and X is reachable from Y at S1 | |
| for (auto &Edge : ValueInfo.getNodeInfoAtLevel(I).Edges) { | |
| propagate(Edge.Other, Src, MatchState::FlowFromReadOnly, ReachSet, | |
| WorkList); | |
| propagate(Src, Edge.Other, MatchState::FlowToWriteOnly, ReachSet, | |
| WorkList); | |
| } | |
| } | |
| } | |
| } | |
| static Optional<InstantiatedValue> getNodeBelow(const CFLGraph &Graph, | |
| InstantiatedValue V) { | |
| auto NodeBelow = InstantiatedValue{V.Val, V.DerefLevel + 1}; | |
| if (Graph.getNode(NodeBelow)) | |
| return NodeBelow; | |
| return None; | |
| } | |
| static void processWorkListItem(const WorkListItem &Item, const CFLGraph &Graph, | |
| ReachabilitySet &ReachSet, AliasMemSet &MemSet, | |
| std::vector<WorkListItem> &WorkList) { | |
| auto FromNode = Item.From; | |
| auto ToNode = Item.To; | |
| auto NodeInfo = Graph.getNode(ToNode); | |
| assert(NodeInfo != nullptr); | |
| // TODO: propagate field offsets | |
| // FIXME: Here is a neat trick we can do: since both ReachSet and MemSet holds | |
| // relations that are symmetric, we could actually cut the storage by half by | |
| // sorting FromNode and ToNode before insertion happens. | |
| // The newly added value alias pair may potentially generate more memory | |
| // alias pairs. Check for them here. | |
| auto FromNodeBelow = getNodeBelow(Graph, FromNode); | |
| auto ToNodeBelow = getNodeBelow(Graph, ToNode); | |
| if (FromNodeBelow && ToNodeBelow && | |
| MemSet.insert(*FromNodeBelow, *ToNodeBelow)) { | |
| propagate(*FromNodeBelow, *ToNodeBelow, | |
| MatchState::FlowFromMemAliasNoReadWrite, ReachSet, WorkList); | |
| for (const auto &Mapping : ReachSet.reachableValueAliases(*FromNodeBelow)) { | |
| auto Src = Mapping.first; | |
| auto MemAliasPropagate = [&](MatchState FromState, MatchState ToState) { | |
| if (Mapping.second.test(static_cast<size_t>(FromState))) | |
| propagate(Src, *ToNodeBelow, ToState, ReachSet, WorkList); | |
| }; | |
| MemAliasPropagate(MatchState::FlowFromReadOnly, | |
| MatchState::FlowFromMemAliasReadOnly); | |
| MemAliasPropagate(MatchState::FlowToWriteOnly, | |
| MatchState::FlowToMemAliasWriteOnly); | |
| MemAliasPropagate(MatchState::FlowToReadWrite, | |
| MatchState::FlowToMemAliasReadWrite); | |
| } | |
| } | |
| // This is the core of the state machine walking algorithm. We expand ReachSet | |
| // based on which state we are at (which in turn dictates what edges we | |
| // should examine) | |
| // From a high-level point of view, the state machine here guarantees two | |
| // properties: | |
| // - If *X and *Y are memory aliases, then X and Y are value aliases | |
| // - If Y is an alias of X, then reverse assignment edges (if there is any) | |
| // should precede any assignment edges on the path from X to Y. | |
| auto NextAssignState = [&](MatchState State) { | |
| for (const auto &AssignEdge : NodeInfo->Edges) | |
| propagate(FromNode, AssignEdge.Other, State, ReachSet, WorkList); | |
| }; | |
| auto NextRevAssignState = [&](MatchState State) { | |
| for (const auto &RevAssignEdge : NodeInfo->ReverseEdges) | |
| propagate(FromNode, RevAssignEdge.Other, State, ReachSet, WorkList); | |
| }; | |
| auto NextMemState = [&](MatchState State) { | |
| if (auto AliasSet = MemSet.getMemoryAliases(ToNode)) { | |
| for (const auto &MemAlias : *AliasSet) | |
| propagate(FromNode, MemAlias, State, ReachSet, WorkList); | |
| } | |
| }; | |
| switch (Item.State) { | |
| case MatchState::FlowFromReadOnly: | |
| NextRevAssignState(MatchState::FlowFromReadOnly); | |
| NextAssignState(MatchState::FlowToReadWrite); | |
| NextMemState(MatchState::FlowFromMemAliasReadOnly); | |
| break; | |
| case MatchState::FlowFromMemAliasNoReadWrite: | |
| NextRevAssignState(MatchState::FlowFromReadOnly); | |
| NextAssignState(MatchState::FlowToWriteOnly); | |
| break; | |
| case MatchState::FlowFromMemAliasReadOnly: | |
| NextRevAssignState(MatchState::FlowFromReadOnly); | |
| NextAssignState(MatchState::FlowToReadWrite); | |
| break; | |
| case MatchState::FlowToWriteOnly: | |
| NextAssignState(MatchState::FlowToWriteOnly); | |
| NextMemState(MatchState::FlowToMemAliasWriteOnly); | |
| break; | |
| case MatchState::FlowToReadWrite: | |
| NextAssignState(MatchState::FlowToReadWrite); | |
| NextMemState(MatchState::FlowToMemAliasReadWrite); | |
| break; | |
| case MatchState::FlowToMemAliasWriteOnly: | |
| NextAssignState(MatchState::FlowToWriteOnly); | |
| break; | |
| case MatchState::FlowToMemAliasReadWrite: | |
| NextAssignState(MatchState::FlowToReadWrite); | |
| break; | |
| } | |
| } | |
| static AliasAttrMap buildAttrMap(const CFLGraph &Graph, | |
| const ReachabilitySet &ReachSet) { | |
| AliasAttrMap AttrMap; | |
| std::vector<InstantiatedValue> WorkList, NextList; | |
| // Initialize each node with its original AliasAttrs in CFLGraph | |
| for (const auto &Mapping : Graph.value_mappings()) { | |
| auto Val = Mapping.first; | |
| auto &ValueInfo = Mapping.second; | |
| for (unsigned I = 0, E = ValueInfo.getNumLevels(); I < E; ++I) { | |
| auto Node = InstantiatedValue{Val, I}; | |
| AttrMap.add(Node, ValueInfo.getNodeInfoAtLevel(I).Attr); | |
| WorkList.push_back(Node); | |
| } | |
| } | |
| while (!WorkList.empty()) { | |
| for (const auto &Dst : WorkList) { | |
| auto DstAttr = AttrMap.getAttrs(Dst); | |
| if (DstAttr.none()) | |
| continue; | |
| // Propagate attr on the same level | |
| for (const auto &Mapping : ReachSet.reachableValueAliases(Dst)) { | |
| auto Src = Mapping.first; | |
| if (AttrMap.add(Src, DstAttr)) | |
| NextList.push_back(Src); | |
| } | |
| // Propagate attr to the levels below | |
| auto DstBelow = getNodeBelow(Graph, Dst); | |
| while (DstBelow) { | |
| if (AttrMap.add(*DstBelow, DstAttr)) { | |
| NextList.push_back(*DstBelow); | |
| break; | |
| } | |
| DstBelow = getNodeBelow(Graph, *DstBelow); | |
| } | |
| } | |
| WorkList.swap(NextList); | |
| NextList.clear(); | |
| } | |
| return AttrMap; | |
| } | |
| CFLAndersAAResult::FunctionInfo | |
| CFLAndersAAResult::buildInfoFrom(const Function &Fn) { | |
| CFLGraphBuilder<CFLAndersAAResult> GraphBuilder( | |
| *this, TLI, | |
| // Cast away the constness here due to GraphBuilder's API requirement | |
| const_cast<Function &>(Fn)); | |
| auto &Graph = GraphBuilder.getCFLGraph(); | |
| ReachabilitySet ReachSet; | |
| AliasMemSet MemSet; | |
| std::vector<WorkListItem> WorkList, NextList; | |
| initializeWorkList(WorkList, ReachSet, Graph); | |
| // TODO: make sure we don't stop before the fix point is reached | |
| while (!WorkList.empty()) { | |
| for (const auto &Item : WorkList) | |
| processWorkListItem(Item, Graph, ReachSet, MemSet, NextList); | |
| NextList.swap(WorkList); | |
| NextList.clear(); | |
| } | |
| // Now that we have all the reachability info, propagate AliasAttrs according | |
| // to it | |
| auto IValueAttrMap = buildAttrMap(Graph, ReachSet); | |
| return FunctionInfo(Fn, GraphBuilder.getReturnValues(), ReachSet, | |
| std::move(IValueAttrMap)); | |
| } | |
| void CFLAndersAAResult::scan(const Function &Fn) { | |
| auto InsertPair = Cache.insert(std::make_pair(&Fn, Optional<FunctionInfo>())); | |
| (void)InsertPair; | |
| assert(InsertPair.second && | |
| "Trying to scan a function that has already been cached"); | |
| // Note that we can't do Cache[Fn] = buildSetsFrom(Fn) here: the function call | |
| // may get evaluated after operator[], potentially triggering a DenseMap | |
| // resize and invalidating the reference returned by operator[] | |
| auto FunInfo = buildInfoFrom(Fn); | |
| Cache[&Fn] = std::move(FunInfo); | |
| Handles.emplace_front(const_cast<Function *>(&Fn), this); | |
| } | |
| void CFLAndersAAResult::evict(const Function *Fn) { Cache.erase(Fn); } | |
| const Optional<CFLAndersAAResult::FunctionInfo> & | |
| CFLAndersAAResult::ensureCached(const Function &Fn) { | |
| auto Iter = Cache.find(&Fn); | |
| if (Iter == Cache.end()) { | |
| scan(Fn); | |
| Iter = Cache.find(&Fn); | |
| assert(Iter != Cache.end()); | |
| assert(Iter->second.hasValue()); | |
| } | |
| return Iter->second; | |
| } | |
| const AliasSummary *CFLAndersAAResult::getAliasSummary(const Function &Fn) { | |
| auto &FunInfo = ensureCached(Fn); | |
| if (FunInfo.hasValue()) | |
| return &FunInfo->getAliasSummary(); | |
| else | |
| return nullptr; | |
| } | |
| AliasResult CFLAndersAAResult::query(const MemoryLocation &LocA, | |
| const MemoryLocation &LocB) { | |
| auto *ValA = LocA.Ptr; | |
| auto *ValB = LocB.Ptr; | |
| if (!ValA->getType()->isPointerTy() || !ValB->getType()->isPointerTy()) | |
| return NoAlias; | |
| auto *Fn = parentFunctionOfValue(ValA); | |
| if (!Fn) { | |
| Fn = parentFunctionOfValue(ValB); | |
| if (!Fn) { | |
| // The only times this is known to happen are when globals + InlineAsm are | |
| // involved | |
| LLVM_DEBUG( | |
| dbgs() | |
| << "CFLAndersAA: could not extract parent function information.\n"); | |
| return MayAlias; | |
| } | |
| } else { | |
| assert(!parentFunctionOfValue(ValB) || parentFunctionOfValue(ValB) == Fn); | |
| } | |
| assert(Fn != nullptr); | |
| auto &FunInfo = ensureCached(*Fn); | |
| // AliasMap lookup | |
| if (FunInfo->mayAlias(ValA, LocA.Size, ValB, LocB.Size)) | |
| return MayAlias; | |
| return NoAlias; | |
| } | |
| AliasResult CFLAndersAAResult::alias(const MemoryLocation &LocA, | |
| const MemoryLocation &LocB) { | |
| if (LocA.Ptr == LocB.Ptr) | |
| return MustAlias; | |
| // Comparisons between global variables and other constants should be | |
| // handled by BasicAA. | |
| // CFLAndersAA may report NoAlias when comparing a GlobalValue and | |
| // ConstantExpr, but every query needs to have at least one Value tied to a | |
| // Function, and neither GlobalValues nor ConstantExprs are. | |
| if (isa<Constant>(LocA.Ptr) && isa<Constant>(LocB.Ptr)) | |
| return AAResultBase::alias(LocA, LocB); | |
| AliasResult QueryResult = query(LocA, LocB); | |
| if (QueryResult == MayAlias) | |
| return AAResultBase::alias(LocA, LocB); | |
| return QueryResult; | |
| } | |
| AnalysisKey CFLAndersAA::Key; | |
| CFLAndersAAResult CFLAndersAA::run(Function &F, FunctionAnalysisManager &AM) { | |
| return CFLAndersAAResult(AM.getResult<TargetLibraryAnalysis>(F)); | |
| } | |
| char CFLAndersAAWrapperPass::ID = 0; | |
| INITIALIZE_PASS(CFLAndersAAWrapperPass, "cfl-anders-aa", | |
| "Inclusion-Based CFL Alias Analysis", false, true) | |
| ImmutablePass *llvm::createCFLAndersAAWrapperPass() { | |
| return new CFLAndersAAWrapperPass(); | |
| } | |
| CFLAndersAAWrapperPass::CFLAndersAAWrapperPass() : ImmutablePass(ID) { | |
| initializeCFLAndersAAWrapperPassPass(*PassRegistry::getPassRegistry()); | |
| } | |
| void CFLAndersAAWrapperPass::initializePass() { | |
| auto &TLIWP = getAnalysis<TargetLibraryInfoWrapperPass>(); | |
| Result.reset(new CFLAndersAAResult(TLIWP.getTLI())); | |
| } | |
| void CFLAndersAAWrapperPass::getAnalysisUsage(AnalysisUsage &AU) const { | |
| AU.setPreservesAll(); | |
| AU.addRequired<TargetLibraryInfoWrapperPass>(); | |
| } |