| // Copyright 2018 The SwiftShader Authors. All Rights Reserved. | |
| // | |
| // Licensed under the Apache License, Version 2.0 (the "License"); | |
| // you may not use this file except in compliance with the License. | |
| // You may obtain a copy of the License at | |
| // | |
| // http://www.apache.org/licenses/LICENSE-2.0 | |
| // | |
| // Unless required by applicable law or agreed to in writing, software | |
| // distributed under the License is distributed on an "AS IS" BASIS, | |
| // WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. | |
| // See the License for the specific language governing permissions and | |
| // limitations under the License. | |
| #include "VkDeviceMemory.hpp" | |
| #include "VkBuffer.hpp" | |
| #include "VkDevice.hpp" | |
| #include "VkImage.hpp" | |
| #include "Device/Blitter.hpp" | |
| #include "Device/ETC_Decoder.hpp" | |
| #include <cstring> | |
| namespace | |
| { | |
| ETC_Decoder::InputType GetInputType(const vk::Format& format) | |
| { | |
| switch(format) | |
| { | |
| case VK_FORMAT_EAC_R11_UNORM_BLOCK: | |
| return ETC_Decoder::ETC_R_UNSIGNED; | |
| case VK_FORMAT_EAC_R11_SNORM_BLOCK: | |
| return ETC_Decoder::ETC_R_SIGNED; | |
| case VK_FORMAT_EAC_R11G11_UNORM_BLOCK: | |
| return ETC_Decoder::ETC_RG_UNSIGNED; | |
| case VK_FORMAT_EAC_R11G11_SNORM_BLOCK: | |
| return ETC_Decoder::ETC_RG_SIGNED; | |
| case VK_FORMAT_ETC2_R8G8B8_UNORM_BLOCK: | |
| case VK_FORMAT_ETC2_R8G8B8_SRGB_BLOCK: | |
| return ETC_Decoder::ETC_RGB; | |
| case VK_FORMAT_ETC2_R8G8B8A1_UNORM_BLOCK: | |
| case VK_FORMAT_ETC2_R8G8B8A1_SRGB_BLOCK: | |
| return ETC_Decoder::ETC_RGB_PUNCHTHROUGH_ALPHA; | |
| case VK_FORMAT_ETC2_R8G8B8A8_UNORM_BLOCK: | |
| case VK_FORMAT_ETC2_R8G8B8A8_SRGB_BLOCK: | |
| return ETC_Decoder::ETC_RGBA; | |
| default: | |
| UNIMPLEMENTED("format: %d", int(format)); | |
| return ETC_Decoder::ETC_RGBA; | |
| } | |
| } | |
| } | |
| namespace vk | |
| { | |
| Image::Image(const VkImageCreateInfo* pCreateInfo, void* mem, Device *device) : | |
| device(device), | |
| flags(pCreateInfo->flags), | |
| imageType(pCreateInfo->imageType), | |
| format(pCreateInfo->format), | |
| extent(pCreateInfo->extent), | |
| mipLevels(pCreateInfo->mipLevels), | |
| arrayLayers(pCreateInfo->arrayLayers), | |
| samples(pCreateInfo->samples), | |
| tiling(pCreateInfo->tiling), | |
| usage(pCreateInfo->usage) | |
| { | |
| if(format.isCompressed()) | |
| { | |
| VkImageCreateInfo compressedImageCreateInfo = *pCreateInfo; | |
| compressedImageCreateInfo.format = format.getDecompressedFormat(); | |
| decompressedImage = new (mem) Image(&compressedImageCreateInfo, nullptr, device); | |
| } | |
| } | |
| void Image::destroy(const VkAllocationCallbacks* pAllocator) | |
| { | |
| if(decompressedImage) | |
| { | |
| vk::deallocate(decompressedImage, pAllocator); | |
| } | |
| } | |
| size_t Image::ComputeRequiredAllocationSize(const VkImageCreateInfo* pCreateInfo) | |
| { | |
| return Format(pCreateInfo->format).isCompressed() ? sizeof(Image) : 0; | |
| } | |
| const VkMemoryRequirements Image::getMemoryRequirements() const | |
| { | |
| VkMemoryRequirements memoryRequirements; | |
| memoryRequirements.alignment = vk::REQUIRED_MEMORY_ALIGNMENT; | |
| memoryRequirements.memoryTypeBits = vk::MEMORY_TYPE_GENERIC_BIT; | |
| memoryRequirements.size = getStorageSize(format.getAspects()) + | |
| (decompressedImage ? decompressedImage->getStorageSize(decompressedImage->format.getAspects()) : 0); | |
| return memoryRequirements; | |
| } | |
| void Image::bind(DeviceMemory* pDeviceMemory, VkDeviceSize pMemoryOffset) | |
| { | |
| deviceMemory = pDeviceMemory; | |
| memoryOffset = pMemoryOffset; | |
| if(decompressedImage) | |
| { | |
| decompressedImage->deviceMemory = deviceMemory; | |
| decompressedImage->memoryOffset = memoryOffset + getStorageSize(format.getAspects()); | |
| } | |
| } | |
| void Image::getSubresourceLayout(const VkImageSubresource* pSubresource, VkSubresourceLayout* pLayout) const | |
| { | |
| // By spec, aspectMask has a single bit set. | |
| if (!((pSubresource->aspectMask == VK_IMAGE_ASPECT_COLOR_BIT) || | |
| (pSubresource->aspectMask == VK_IMAGE_ASPECT_DEPTH_BIT) || | |
| (pSubresource->aspectMask == VK_IMAGE_ASPECT_STENCIL_BIT) || | |
| (pSubresource->aspectMask == VK_IMAGE_ASPECT_PLANE_0_BIT) || | |
| (pSubresource->aspectMask == VK_IMAGE_ASPECT_PLANE_1_BIT) || | |
| (pSubresource->aspectMask == VK_IMAGE_ASPECT_PLANE_2_BIT))) | |
| { | |
| UNSUPPORTED("aspectMask %X", pSubresource->aspectMask); | |
| } | |
| auto aspect = static_cast<VkImageAspectFlagBits>(pSubresource->aspectMask); | |
| pLayout->offset = getMemoryOffset(aspect, pSubresource->mipLevel, pSubresource->arrayLayer); | |
| pLayout->size = getMultiSampledLevelSize(aspect, pSubresource->mipLevel); | |
| pLayout->rowPitch = rowPitchBytes(aspect, pSubresource->mipLevel); | |
| pLayout->depthPitch = slicePitchBytes(aspect, pSubresource->mipLevel); | |
| pLayout->arrayPitch = getLayerSize(aspect); | |
| } | |
| void Image::copyTo(Image* dstImage, const VkImageCopy& pRegion) const | |
| { | |
| // Image copy does not perform any conversion, it simply copies memory from | |
| // an image to another image that has the same number of bytes per pixel. | |
| if (!((pRegion.srcSubresource.aspectMask == VK_IMAGE_ASPECT_COLOR_BIT) || | |
| (pRegion.srcSubresource.aspectMask == VK_IMAGE_ASPECT_DEPTH_BIT) || | |
| (pRegion.srcSubresource.aspectMask == VK_IMAGE_ASPECT_STENCIL_BIT) || | |
| (pRegion.srcSubresource.aspectMask == VK_IMAGE_ASPECT_PLANE_0_BIT) || | |
| (pRegion.srcSubresource.aspectMask == VK_IMAGE_ASPECT_PLANE_1_BIT) || | |
| (pRegion.srcSubresource.aspectMask == VK_IMAGE_ASPECT_PLANE_2_BIT))) | |
| { | |
| UNSUPPORTED("srcSubresource.aspectMask %X", pRegion.srcSubresource.aspectMask); | |
| } | |
| if (!((pRegion.dstSubresource.aspectMask == VK_IMAGE_ASPECT_COLOR_BIT) || | |
| (pRegion.dstSubresource.aspectMask == VK_IMAGE_ASPECT_DEPTH_BIT) || | |
| (pRegion.dstSubresource.aspectMask == VK_IMAGE_ASPECT_STENCIL_BIT) || | |
| (pRegion.dstSubresource.aspectMask == VK_IMAGE_ASPECT_PLANE_0_BIT) || | |
| (pRegion.dstSubresource.aspectMask == VK_IMAGE_ASPECT_PLANE_1_BIT) || | |
| (pRegion.dstSubresource.aspectMask == VK_IMAGE_ASPECT_PLANE_2_BIT))) | |
| { | |
| UNSUPPORTED("dstSubresource.aspectMask %X", pRegion.dstSubresource.aspectMask); | |
| } | |
| VkImageAspectFlagBits srcAspect = static_cast<VkImageAspectFlagBits>(pRegion.srcSubresource.aspectMask); | |
| VkImageAspectFlagBits dstAspect = static_cast<VkImageAspectFlagBits>(pRegion.dstSubresource.aspectMask); | |
| Format srcFormat = getFormat(srcAspect); | |
| Format dstFormat = dstImage->getFormat(dstAspect); | |
| if(((samples > VK_SAMPLE_COUNT_1_BIT) && (imageType == VK_IMAGE_TYPE_2D) && !format.isNonNormalizedInteger()) || | |
| srcFormat.hasQuadLayout() || dstFormat.hasQuadLayout()) | |
| { | |
| // Requires multisampling resolve, or quadlayout awareness | |
| VkImageBlit region; | |
| region.srcSubresource = pRegion.srcSubresource; | |
| region.srcOffsets[0] = pRegion.srcOffset; | |
| region.srcOffsets[1].x = region.srcOffsets[0].x + pRegion.extent.width; | |
| region.srcOffsets[1].y = region.srcOffsets[0].y + pRegion.extent.height; | |
| region.srcOffsets[1].z = region.srcOffsets[0].z + pRegion.extent.depth; | |
| region.dstSubresource = pRegion.dstSubresource; | |
| region.dstOffsets[0] = pRegion.dstOffset; | |
| region.dstOffsets[1].x = region.dstOffsets[0].x + pRegion.extent.width; | |
| region.dstOffsets[1].y = region.dstOffsets[0].y + pRegion.extent.height; | |
| region.dstOffsets[1].z = region.dstOffsets[0].z + pRegion.extent.depth; | |
| return device->getBlitter()->blit(this, dstImage, region, VK_FILTER_NEAREST); | |
| } | |
| int srcBytesPerBlock = srcFormat.bytesPerBlock(); | |
| ASSERT(srcBytesPerBlock == dstFormat.bytesPerBlock()); | |
| const uint8_t* srcMem = static_cast<const uint8_t*>(getTexelPointer(pRegion.srcOffset, pRegion.srcSubresource)); | |
| uint8_t* dstMem = static_cast<uint8_t*>(dstImage->getTexelPointer(pRegion.dstOffset, pRegion.dstSubresource)); | |
| int srcRowPitchBytes = rowPitchBytes(srcAspect, pRegion.srcSubresource.mipLevel); | |
| int srcSlicePitchBytes = slicePitchBytes(srcAspect, pRegion.srcSubresource.mipLevel); | |
| int dstRowPitchBytes = dstImage->rowPitchBytes(dstAspect, pRegion.dstSubresource.mipLevel); | |
| int dstSlicePitchBytes = dstImage->slicePitchBytes(dstAspect, pRegion.dstSubresource.mipLevel); | |
| VkExtent3D srcExtent = getMipLevelExtent(srcAspect, pRegion.srcSubresource.mipLevel); | |
| VkExtent3D dstExtent = dstImage->getMipLevelExtent(dstAspect, pRegion.dstSubresource.mipLevel); | |
| VkExtent3D copyExtent = imageExtentInBlocks(pRegion.extent, srcAspect); | |
| bool isSinglePlane = (copyExtent.depth == 1); | |
| bool isSingleLine = (copyExtent.height == 1) && isSinglePlane; | |
| // In order to copy multiple lines using a single memcpy call, we | |
| // have to make sure that we need to copy the entire line and that | |
| // both source and destination lines have the same length in bytes | |
| bool isEntireLine = (pRegion.extent.width == srcExtent.width) && | |
| (pRegion.extent.width == dstExtent.width) && | |
| // For non compressed formats, blockWidth is 1. For compressed | |
| // formats, rowPitchBytes returns the number of bytes for a row of | |
| // blocks, so we have to divide by the block height, which means: | |
| // srcRowPitchBytes / srcBlockWidth == dstRowPitchBytes / dstBlockWidth | |
| // And, to avoid potential non exact integer division, for example if a | |
| // block has 16 bytes and represents 5 lines, we change the equation to: | |
| // srcRowPitchBytes * dstBlockWidth == dstRowPitchBytes * srcBlockWidth | |
| ((srcRowPitchBytes * dstFormat.blockWidth()) == | |
| (dstRowPitchBytes * srcFormat.blockWidth())); | |
| // In order to copy multiple planes using a single memcpy call, we | |
| // have to make sure that we need to copy the entire plane and that | |
| // both source and destination planes have the same length in bytes | |
| bool isEntirePlane = isEntireLine && | |
| (copyExtent.height == srcExtent.height) && | |
| (copyExtent.height == dstExtent.height) && | |
| (srcSlicePitchBytes == dstSlicePitchBytes); | |
| if(isSingleLine) // Copy one line | |
| { | |
| size_t copySize = copyExtent.width * srcBytesPerBlock; | |
| ASSERT((srcMem + copySize) < end()); | |
| ASSERT((dstMem + copySize) < dstImage->end()); | |
| memcpy(dstMem, srcMem, copySize); | |
| } | |
| else if(isEntireLine && isSinglePlane) // Copy one plane | |
| { | |
| size_t copySize = copyExtent.height * srcRowPitchBytes; | |
| ASSERT((srcMem + copySize) < end()); | |
| ASSERT((dstMem + copySize) < dstImage->end()); | |
| memcpy(dstMem, srcMem, copySize); | |
| } | |
| else if(isEntirePlane) // Copy multiple planes | |
| { | |
| size_t copySize = copyExtent.depth * srcSlicePitchBytes; | |
| ASSERT((srcMem + copySize) < end()); | |
| ASSERT((dstMem + copySize) < dstImage->end()); | |
| memcpy(dstMem, srcMem, copySize); | |
| } | |
| else if(isEntireLine) // Copy plane by plane | |
| { | |
| size_t copySize = copyExtent.height * srcRowPitchBytes; | |
| for(uint32_t z = 0; z < copyExtent.depth; z++, dstMem += dstSlicePitchBytes, srcMem += srcSlicePitchBytes) | |
| { | |
| ASSERT((srcMem + copySize) < end()); | |
| ASSERT((dstMem + copySize) < dstImage->end()); | |
| memcpy(dstMem, srcMem, copySize); | |
| } | |
| } | |
| else // Copy line by line | |
| { | |
| size_t copySize = copyExtent.width * srcBytesPerBlock; | |
| for(uint32_t z = 0; z < copyExtent.depth; z++) | |
| { | |
| for(uint32_t y = 0; y < copyExtent.height; y++, dstMem += dstRowPitchBytes, srcMem += srcRowPitchBytes) | |
| { | |
| ASSERT((srcMem + copySize) < end()); | |
| ASSERT((dstMem + copySize) < dstImage->end()); | |
| memcpy(dstMem, srcMem, copySize); | |
| } | |
| } | |
| } | |
| } | |
| void Image::copy(Buffer* buffer, const VkBufferImageCopy& region, bool bufferIsSource) | |
| { | |
| switch(region.imageSubresource.aspectMask) | |
| { | |
| case VK_IMAGE_ASPECT_COLOR_BIT: | |
| case VK_IMAGE_ASPECT_DEPTH_BIT: | |
| case VK_IMAGE_ASPECT_STENCIL_BIT: | |
| case VK_IMAGE_ASPECT_PLANE_0_BIT: | |
| case VK_IMAGE_ASPECT_PLANE_1_BIT: | |
| case VK_IMAGE_ASPECT_PLANE_2_BIT: | |
| break; | |
| default: | |
| UNSUPPORTED("aspectMask %x", int(region.imageSubresource.aspectMask)); | |
| break; | |
| } | |
| auto aspect = static_cast<VkImageAspectFlagBits>(region.imageSubresource.aspectMask); | |
| Format copyFormat = getFormat(aspect); | |
| VkExtent3D imageExtent = imageExtentInBlocks(region.imageExtent, aspect); | |
| VkExtent2D bufferExtent = bufferExtentInBlocks({ imageExtent.width, imageExtent.height }, region); | |
| int bytesPerBlock = copyFormat.bytesPerBlock(); | |
| int bufferRowPitchBytes = bufferExtent.width * bytesPerBlock; | |
| int bufferSlicePitchBytes = bufferExtent.height * bufferRowPitchBytes; | |
| uint8_t* bufferMemory = static_cast<uint8_t*>(buffer->getOffsetPointer(region.bufferOffset)); | |
| if (copyFormat.hasQuadLayout()) | |
| { | |
| if (bufferIsSource) | |
| { | |
| return device->getBlitter()->blitFromBuffer(this, region.imageSubresource, region.imageOffset, | |
| region.imageExtent, bufferMemory, bufferRowPitchBytes, | |
| bufferSlicePitchBytes); | |
| } | |
| else | |
| { | |
| return device->getBlitter()->blitToBuffer(this, region.imageSubresource, region.imageOffset, | |
| region.imageExtent, bufferMemory, bufferRowPitchBytes, | |
| bufferSlicePitchBytes); | |
| } | |
| } | |
| uint8_t* imageMemory = static_cast<uint8_t*>(getTexelPointer(region.imageOffset, region.imageSubresource)); | |
| uint8_t* srcMemory = bufferIsSource ? bufferMemory : imageMemory; | |
| uint8_t* dstMemory = bufferIsSource ? imageMemory : bufferMemory; | |
| int imageRowPitchBytes = rowPitchBytes(aspect, region.imageSubresource.mipLevel); | |
| int imageSlicePitchBytes = slicePitchBytes(aspect, region.imageSubresource.mipLevel); | |
| int srcSlicePitchBytes = bufferIsSource ? bufferSlicePitchBytes : imageSlicePitchBytes; | |
| int dstSlicePitchBytes = bufferIsSource ? imageSlicePitchBytes : bufferSlicePitchBytes; | |
| int srcRowPitchBytes = bufferIsSource ? bufferRowPitchBytes : imageRowPitchBytes; | |
| int dstRowPitchBytes = bufferIsSource ? imageRowPitchBytes : bufferRowPitchBytes; | |
| VkExtent3D mipLevelExtent = getMipLevelExtent(aspect, region.imageSubresource.mipLevel); | |
| bool isSinglePlane = (imageExtent.depth == 1); | |
| bool isSingleLine = (imageExtent.height == 1) && isSinglePlane; | |
| bool isEntireLine = (imageExtent.width == mipLevelExtent.width) && | |
| (imageRowPitchBytes == bufferRowPitchBytes); | |
| bool isEntirePlane = isEntireLine && (imageExtent.height == mipLevelExtent.height) && | |
| (imageSlicePitchBytes == bufferSlicePitchBytes); | |
| VkDeviceSize copySize = 0; | |
| VkDeviceSize bufferLayerSize = 0; | |
| if(isSingleLine) | |
| { | |
| copySize = imageExtent.width * bytesPerBlock; | |
| bufferLayerSize = copySize; | |
| } | |
| else if(isEntireLine && isSinglePlane) | |
| { | |
| copySize = imageExtent.height * imageRowPitchBytes; | |
| bufferLayerSize = copySize; | |
| } | |
| else if(isEntirePlane) | |
| { | |
| copySize = imageExtent.depth * imageSlicePitchBytes; // Copy multiple planes | |
| bufferLayerSize = copySize; | |
| } | |
| else if(isEntireLine) // Copy plane by plane | |
| { | |
| copySize = imageExtent.height * imageRowPitchBytes; | |
| bufferLayerSize = copySize * imageExtent.depth; | |
| } | |
| else // Copy line by line | |
| { | |
| copySize = imageExtent.width * bytesPerBlock; | |
| bufferLayerSize = copySize * imageExtent.depth * imageExtent.height; | |
| } | |
| VkDeviceSize imageLayerSize = getLayerSize(aspect); | |
| VkDeviceSize srcLayerSize = bufferIsSource ? bufferLayerSize : imageLayerSize; | |
| VkDeviceSize dstLayerSize = bufferIsSource ? imageLayerSize : bufferLayerSize; | |
| for(uint32_t i = 0; i < region.imageSubresource.layerCount; i++) | |
| { | |
| if(isSingleLine || (isEntireLine && isSinglePlane) || isEntirePlane) | |
| { | |
| ASSERT(((bufferIsSource ? dstMemory : srcMemory) + copySize) < end()); | |
| ASSERT(((bufferIsSource ? srcMemory : dstMemory) + copySize) < buffer->end()); | |
| memcpy(dstMemory, srcMemory, copySize); | |
| } | |
| else if(isEntireLine) // Copy plane by plane | |
| { | |
| uint8_t* srcPlaneMemory = srcMemory; | |
| uint8_t* dstPlaneMemory = dstMemory; | |
| for(uint32_t z = 0; z < imageExtent.depth; z++) | |
| { | |
| ASSERT(((bufferIsSource ? dstPlaneMemory : srcPlaneMemory) + copySize) < end()); | |
| ASSERT(((bufferIsSource ? srcPlaneMemory : dstPlaneMemory) + copySize) < buffer->end()); | |
| memcpy(dstPlaneMemory, srcPlaneMemory, copySize); | |
| srcPlaneMemory += srcSlicePitchBytes; | |
| dstPlaneMemory += dstSlicePitchBytes; | |
| } | |
| } | |
| else // Copy line by line | |
| { | |
| uint8_t* srcLayerMemory = srcMemory; | |
| uint8_t* dstLayerMemory = dstMemory; | |
| for(uint32_t z = 0; z < imageExtent.depth; z++) | |
| { | |
| uint8_t* srcPlaneMemory = srcLayerMemory; | |
| uint8_t* dstPlaneMemory = dstLayerMemory; | |
| for(uint32_t y = 0; y < imageExtent.height; y++) | |
| { | |
| ASSERT(((bufferIsSource ? dstPlaneMemory : srcPlaneMemory) + copySize) < end()); | |
| ASSERT(((bufferIsSource ? srcPlaneMemory : dstPlaneMemory) + copySize) < buffer->end()); | |
| memcpy(dstPlaneMemory, srcPlaneMemory, copySize); | |
| srcPlaneMemory += srcRowPitchBytes; | |
| dstPlaneMemory += dstRowPitchBytes; | |
| } | |
| srcLayerMemory += srcSlicePitchBytes; | |
| dstLayerMemory += dstSlicePitchBytes; | |
| } | |
| } | |
| srcMemory += srcLayerSize; | |
| dstMemory += dstLayerSize; | |
| } | |
| if(bufferIsSource) | |
| { | |
| prepareForSampling({ region.imageSubresource.aspectMask, region.imageSubresource.mipLevel, 1, | |
| region.imageSubresource.baseArrayLayer, region.imageSubresource.layerCount }); | |
| } | |
| } | |
| void Image::copyTo(Buffer* dstBuffer, const VkBufferImageCopy& region) | |
| { | |
| copy(dstBuffer, region, false); | |
| } | |
| void Image::copyFrom(Buffer* srcBuffer, const VkBufferImageCopy& region) | |
| { | |
| copy(srcBuffer, region, true); | |
| } | |
| void* Image::getTexelPointer(const VkOffset3D& offset, const VkImageSubresourceLayers& subresource) const | |
| { | |
| VkImageAspectFlagBits aspect = static_cast<VkImageAspectFlagBits>(subresource.aspectMask); | |
| return deviceMemory->getOffsetPointer(texelOffsetBytesInStorage(offset, subresource) + | |
| getMemoryOffset(aspect, subresource.mipLevel, subresource.baseArrayLayer)); | |
| } | |
| VkExtent3D Image::imageExtentInBlocks(const VkExtent3D& extent, VkImageAspectFlagBits aspect) const | |
| { | |
| VkExtent3D adjustedExtent = extent; | |
| Format usedFormat = getFormat(aspect); | |
| if(usedFormat.isCompressed()) | |
| { | |
| // When using a compressed format, we use the block as the base unit, instead of the texel | |
| int blockWidth = usedFormat.blockWidth(); | |
| int blockHeight = usedFormat.blockHeight(); | |
| // Mip level allocations will round up to the next block for compressed texture | |
| adjustedExtent.width = ((adjustedExtent.width + blockWidth - 1) / blockWidth); | |
| adjustedExtent.height = ((adjustedExtent.height + blockHeight - 1) / blockHeight); | |
| } | |
| return adjustedExtent; | |
| } | |
| VkOffset3D Image::imageOffsetInBlocks(const VkOffset3D& offset, VkImageAspectFlagBits aspect) const | |
| { | |
| VkOffset3D adjustedOffset = offset; | |
| Format usedFormat = getFormat(aspect); | |
| if(usedFormat.isCompressed()) | |
| { | |
| // When using a compressed format, we use the block as the base unit, instead of the texel | |
| int blockWidth = usedFormat.blockWidth(); | |
| int blockHeight = usedFormat.blockHeight(); | |
| ASSERT(((offset.x % blockWidth) == 0) && ((offset.y % blockHeight) == 0)); // We can't offset within a block | |
| adjustedOffset.x /= blockWidth; | |
| adjustedOffset.y /= blockHeight; | |
| } | |
| return adjustedOffset; | |
| } | |
| VkExtent2D Image::bufferExtentInBlocks(const VkExtent2D& extent, const VkBufferImageCopy& region) const | |
| { | |
| VkExtent2D adjustedExtent = extent; | |
| VkImageAspectFlagBits aspect = static_cast<VkImageAspectFlagBits>(region.imageSubresource.aspectMask); | |
| Format usedFormat = getFormat(aspect); | |
| if(region.bufferRowLength != 0) | |
| { | |
| adjustedExtent.width = region.bufferRowLength; | |
| if(usedFormat.isCompressed()) | |
| { | |
| int blockWidth = usedFormat.blockWidth(); | |
| ASSERT((adjustedExtent.width % blockWidth) == 0); | |
| adjustedExtent.width /= blockWidth; | |
| } | |
| } | |
| if(region.bufferImageHeight != 0) | |
| { | |
| adjustedExtent.height = region.bufferImageHeight; | |
| if(usedFormat.isCompressed()) | |
| { | |
| int blockHeight = usedFormat.blockHeight(); | |
| ASSERT((adjustedExtent.height % blockHeight) == 0); | |
| adjustedExtent.height /= blockHeight; | |
| } | |
| } | |
| return adjustedExtent; | |
| } | |
| int Image::borderSize() const | |
| { | |
| // We won't add a border to compressed cube textures, we'll add it when we decompress the texture | |
| return (isCube() && !format.isCompressed()) ? 1 : 0; | |
| } | |
| VkDeviceSize Image::texelOffsetBytesInStorage(const VkOffset3D& offset, const VkImageSubresourceLayers& subresource) const | |
| { | |
| VkImageAspectFlagBits aspect = static_cast<VkImageAspectFlagBits>(subresource.aspectMask); | |
| VkOffset3D adjustedOffset = imageOffsetInBlocks(offset, aspect); | |
| int border = borderSize(); | |
| return adjustedOffset.z * slicePitchBytes(aspect, subresource.mipLevel) + | |
| (adjustedOffset.y + border) * rowPitchBytes(aspect, subresource.mipLevel) + | |
| (adjustedOffset.x + border) * getFormat(aspect).bytesPerBlock(); | |
| } | |
| VkExtent3D Image::getMipLevelExtent(VkImageAspectFlagBits aspect, uint32_t mipLevel) const | |
| { | |
| VkExtent3D mipLevelExtent; | |
| mipLevelExtent.width = extent.width >> mipLevel; | |
| mipLevelExtent.height = extent.height >> mipLevel; | |
| mipLevelExtent.depth = extent.depth >> mipLevel; | |
| if(mipLevelExtent.width == 0) { mipLevelExtent.width = 1; } | |
| if(mipLevelExtent.height == 0) { mipLevelExtent.height = 1; } | |
| if(mipLevelExtent.depth == 0) { mipLevelExtent.depth = 1; } | |
| switch(aspect) | |
| { | |
| case VK_IMAGE_ASPECT_COLOR_BIT: | |
| case VK_IMAGE_ASPECT_DEPTH_BIT: | |
| case VK_IMAGE_ASPECT_STENCIL_BIT: | |
| case VK_IMAGE_ASPECT_PLANE_0_BIT: // Vulkan 1.1 Table 31. Plane Format Compatibility Table: plane 0 of all defined formats is full resolution. | |
| break; | |
| case VK_IMAGE_ASPECT_PLANE_1_BIT: | |
| case VK_IMAGE_ASPECT_PLANE_2_BIT: | |
| switch(format) | |
| { | |
| case VK_FORMAT_G8_B8_R8_3PLANE_420_UNORM: | |
| case VK_FORMAT_G8_B8R8_2PLANE_420_UNORM: | |
| ASSERT(mipLevelExtent.width % 2 == 0 && mipLevelExtent.height % 2 == 0); // Vulkan 1.1: "Images in this format must be defined with a width and height that is a multiple of two." | |
| // Vulkan 1.1 Table 31. Plane Format Compatibility Table: | |
| // Half-resolution U and V planes. | |
| mipLevelExtent.width /= 2; | |
| mipLevelExtent.height /= 2; | |
| break; | |
| default: | |
| UNSUPPORTED("format %d", int(format)); | |
| } | |
| break; | |
| default: | |
| UNSUPPORTED("aspect %x", int(aspect)); | |
| } | |
| return mipLevelExtent; | |
| } | |
| int Image::rowPitchBytes(VkImageAspectFlagBits aspect, uint32_t mipLevel) const | |
| { | |
| // Depth and Stencil pitch should be computed separately | |
| ASSERT((aspect & (VK_IMAGE_ASPECT_DEPTH_BIT | VK_IMAGE_ASPECT_STENCIL_BIT)) != | |
| (VK_IMAGE_ASPECT_DEPTH_BIT | VK_IMAGE_ASPECT_STENCIL_BIT)); | |
| return getFormat(aspect).pitchB(getMipLevelExtent(aspect, mipLevel).width, borderSize(), true); | |
| } | |
| int Image::slicePitchBytes(VkImageAspectFlagBits aspect, uint32_t mipLevel) const | |
| { | |
| // Depth and Stencil slice should be computed separately | |
| ASSERT((aspect & (VK_IMAGE_ASPECT_DEPTH_BIT | VK_IMAGE_ASPECT_STENCIL_BIT)) != | |
| (VK_IMAGE_ASPECT_DEPTH_BIT | VK_IMAGE_ASPECT_STENCIL_BIT)); | |
| VkExtent3D mipLevelExtent = getMipLevelExtent(aspect, mipLevel); | |
| Format usedFormat = getFormat(aspect); | |
| if(usedFormat.isCompressed()) | |
| { | |
| sw::align(mipLevelExtent.width, usedFormat.blockWidth()); | |
| sw::align(mipLevelExtent.height, usedFormat.blockHeight()); | |
| } | |
| return usedFormat.sliceB(mipLevelExtent.width, mipLevelExtent.height, borderSize(), true); | |
| } | |
| Format Image::getFormat(VkImageAspectFlagBits aspect) const | |
| { | |
| return format.getAspectFormat(aspect); | |
| } | |
| bool Image::isCube() const | |
| { | |
| return (flags & VK_IMAGE_CREATE_CUBE_COMPATIBLE_BIT) && (imageType == VK_IMAGE_TYPE_2D); | |
| } | |
| uint8_t* Image::end() const | |
| { | |
| return reinterpret_cast<uint8_t*>(deviceMemory->getOffsetPointer(deviceMemory->getCommittedMemoryInBytes() + 1)); | |
| } | |
| VkDeviceSize Image::getMemoryOffset(VkImageAspectFlagBits aspect) const | |
| { | |
| switch(format) | |
| { | |
| case VK_FORMAT_D16_UNORM_S8_UINT: | |
| case VK_FORMAT_D24_UNORM_S8_UINT: | |
| case VK_FORMAT_D32_SFLOAT_S8_UINT: | |
| if(aspect == VK_IMAGE_ASPECT_STENCIL_BIT) | |
| { | |
| // Offset by depth buffer to get to stencil buffer | |
| return memoryOffset + getStorageSize(VK_IMAGE_ASPECT_DEPTH_BIT); | |
| } | |
| break; | |
| case VK_FORMAT_G8_B8_R8_3PLANE_420_UNORM: | |
| if(aspect == VK_IMAGE_ASPECT_PLANE_2_BIT) | |
| { | |
| return memoryOffset + getStorageSize(VK_IMAGE_ASPECT_PLANE_1_BIT) | |
| + getStorageSize(VK_IMAGE_ASPECT_PLANE_0_BIT); | |
| } | |
| // Fall through to 2PLANE case: | |
| case VK_FORMAT_G8_B8R8_2PLANE_420_UNORM: | |
| if(aspect == VK_IMAGE_ASPECT_PLANE_1_BIT) | |
| { | |
| return memoryOffset + getStorageSize(VK_IMAGE_ASPECT_PLANE_0_BIT); | |
| } | |
| else | |
| { | |
| ASSERT(aspect == VK_IMAGE_ASPECT_PLANE_0_BIT); | |
| return memoryOffset; | |
| } | |
| break; | |
| default: | |
| break; | |
| } | |
| return memoryOffset; | |
| } | |
| VkDeviceSize Image::getMemoryOffset(VkImageAspectFlagBits aspect, uint32_t mipLevel) const | |
| { | |
| VkDeviceSize offset = getMemoryOffset(aspect); | |
| for(uint32_t i = 0; i < mipLevel; ++i) | |
| { | |
| offset += getMultiSampledLevelSize(aspect, i); | |
| } | |
| return offset; | |
| } | |
| VkDeviceSize Image::getMemoryOffset(VkImageAspectFlagBits aspect, uint32_t mipLevel, uint32_t layer) const | |
| { | |
| return layer * getLayerOffset(aspect, mipLevel) + getMemoryOffset(aspect, mipLevel); | |
| } | |
| VkDeviceSize Image::getMipLevelSize(VkImageAspectFlagBits aspect, uint32_t mipLevel) const | |
| { | |
| return getMipLevelExtent(aspect, mipLevel).depth * slicePitchBytes(aspect, mipLevel); | |
| } | |
| VkDeviceSize Image::getMultiSampledLevelSize(VkImageAspectFlagBits aspect, uint32_t mipLevel) const | |
| { | |
| return getMipLevelSize(aspect, mipLevel) * samples; | |
| } | |
| bool Image::is3DSlice() const | |
| { | |
| return ((imageType == VK_IMAGE_TYPE_3D) && (flags & VK_IMAGE_CREATE_2D_ARRAY_COMPATIBLE_BIT)); | |
| } | |
| VkDeviceSize Image::getLayerOffset(VkImageAspectFlagBits aspect, uint32_t mipLevel) const | |
| { | |
| if(is3DSlice()) | |
| { | |
| // When the VkImageSubresourceRange structure is used to select a subset of the slices of a 3D | |
| // image's mip level in order to create a 2D or 2D array image view of a 3D image created with | |
| // VK_IMAGE_CREATE_2D_ARRAY_COMPATIBLE_BIT, baseArrayLayer and layerCount specify the first | |
| // slice index and the number of slices to include in the created image view. | |
| ASSERT(samples == VK_SAMPLE_COUNT_1_BIT); | |
| // Offset to the proper slice of the 3D image's mip level | |
| return slicePitchBytes(aspect, mipLevel); | |
| } | |
| return getLayerSize(aspect); | |
| } | |
| VkDeviceSize Image::getLayerSize(VkImageAspectFlagBits aspect) const | |
| { | |
| VkDeviceSize layerSize = 0; | |
| for(uint32_t mipLevel = 0; mipLevel < mipLevels; ++mipLevel) | |
| { | |
| layerSize += getMultiSampledLevelSize(aspect, mipLevel); | |
| } | |
| return layerSize; | |
| } | |
| VkDeviceSize Image::getStorageSize(VkImageAspectFlags aspectMask) const | |
| { | |
| if((aspectMask & ~(VK_IMAGE_ASPECT_COLOR_BIT | VK_IMAGE_ASPECT_DEPTH_BIT | VK_IMAGE_ASPECT_STENCIL_BIT | | |
| VK_IMAGE_ASPECT_PLANE_0_BIT | VK_IMAGE_ASPECT_PLANE_1_BIT | VK_IMAGE_ASPECT_PLANE_2_BIT)) != 0) | |
| { | |
| UNSUPPORTED("aspectMask %x", int(aspectMask)); | |
| } | |
| VkDeviceSize storageSize = 0; | |
| if(aspectMask & VK_IMAGE_ASPECT_COLOR_BIT) storageSize += getLayerSize(VK_IMAGE_ASPECT_COLOR_BIT); | |
| if(aspectMask & VK_IMAGE_ASPECT_DEPTH_BIT) storageSize += getLayerSize(VK_IMAGE_ASPECT_DEPTH_BIT); | |
| if(aspectMask & VK_IMAGE_ASPECT_STENCIL_BIT) storageSize += getLayerSize(VK_IMAGE_ASPECT_STENCIL_BIT); | |
| if(aspectMask & VK_IMAGE_ASPECT_PLANE_0_BIT) storageSize += getLayerSize(VK_IMAGE_ASPECT_PLANE_0_BIT); | |
| if(aspectMask & VK_IMAGE_ASPECT_PLANE_1_BIT) storageSize += getLayerSize(VK_IMAGE_ASPECT_PLANE_1_BIT); | |
| if(aspectMask & VK_IMAGE_ASPECT_PLANE_2_BIT) storageSize += getLayerSize(VK_IMAGE_ASPECT_PLANE_2_BIT); | |
| return arrayLayers * storageSize; | |
| } | |
| const Image* Image::getSampledImage(const vk::Format& imageViewFormat) const | |
| { | |
| bool isImageViewCompressed = imageViewFormat.isCompressed(); | |
| if(decompressedImage && !isImageViewCompressed) | |
| { | |
| ASSERT(flags & VK_IMAGE_CREATE_BLOCK_TEXEL_VIEW_COMPATIBLE_BIT); | |
| ASSERT(format.bytesPerBlock() == imageViewFormat.bytesPerBlock()); | |
| } | |
| // If the ImageView's format is compressed, then we do need to decompress the image so that | |
| // it may be sampled properly by texture sampling functions, which don't support compressed | |
| // textures. If the ImageView's format is NOT compressed, then we reinterpret cast the | |
| // compressed image into the ImageView's format, so we must return the compressed image as is. | |
| return (decompressedImage && isImageViewCompressed) ? decompressedImage : this; | |
| } | |
| void Image::blit(Image* dstImage, const VkImageBlit& region, VkFilter filter) const | |
| { | |
| device->getBlitter()->blit(this, dstImage, region, filter); | |
| } | |
| void Image::resolve(Image* dstImage, const VkImageResolve& region) const | |
| { | |
| VkImageBlit blitRegion; | |
| blitRegion.srcOffsets[0] = blitRegion.srcOffsets[1] = region.srcOffset; | |
| blitRegion.srcOffsets[1].x += region.extent.width; | |
| blitRegion.srcOffsets[1].y += region.extent.height; | |
| blitRegion.srcOffsets[1].z += region.extent.depth; | |
| blitRegion.dstOffsets[0] = blitRegion.dstOffsets[1] = region.dstOffset; | |
| blitRegion.dstOffsets[1].x += region.extent.width; | |
| blitRegion.dstOffsets[1].y += region.extent.height; | |
| blitRegion.dstOffsets[1].z += region.extent.depth; | |
| blitRegion.srcSubresource = region.srcSubresource; | |
| blitRegion.dstSubresource = region.dstSubresource; | |
| device->getBlitter()->blit(this, dstImage, blitRegion, VK_FILTER_NEAREST); | |
| } | |
| VkFormat Image::getClearFormat() const | |
| { | |
| // Set the proper format for the clear value, as described here: | |
| // https://www.khronos.org/registry/vulkan/specs/1.1-extensions/html/vkspec.html#clears-values | |
| if(format.isSignedNonNormalizedInteger()) | |
| { | |
| return VK_FORMAT_R32G32B32A32_SINT; | |
| } | |
| else if(format.isUnsignedNonNormalizedInteger()) | |
| { | |
| return VK_FORMAT_R32G32B32A32_UINT; | |
| } | |
| return VK_FORMAT_R32G32B32A32_SFLOAT; | |
| } | |
| uint32_t Image::getLastLayerIndex(const VkImageSubresourceRange& subresourceRange) const | |
| { | |
| return ((subresourceRange.layerCount == VK_REMAINING_ARRAY_LAYERS) ? | |
| arrayLayers : (subresourceRange.baseArrayLayer + subresourceRange.layerCount)) - 1; | |
| } | |
| uint32_t Image::getLastMipLevel(const VkImageSubresourceRange& subresourceRange) const | |
| { | |
| return ((subresourceRange.levelCount == VK_REMAINING_MIP_LEVELS) ? | |
| mipLevels : (subresourceRange.baseMipLevel + subresourceRange.levelCount)) - 1; | |
| } | |
| void Image::clear(void* pixelData, VkFormat pixelFormat, const vk::Format& viewFormat, const VkImageSubresourceRange& subresourceRange, const VkRect2D& renderArea) | |
| { | |
| device->getBlitter()->clear(pixelData, pixelFormat, this, viewFormat, subresourceRange, &renderArea); | |
| } | |
| void Image::clear(const VkClearColorValue& color, const VkImageSubresourceRange& subresourceRange) | |
| { | |
| if(!(subresourceRange.aspectMask == VK_IMAGE_ASPECT_COLOR_BIT)) | |
| { | |
| UNIMPLEMENTED("aspectMask"); | |
| } | |
| device->getBlitter()->clear((void*)color.float32, getClearFormat(), this, format, subresourceRange); | |
| } | |
| void Image::clear(const VkClearDepthStencilValue& color, const VkImageSubresourceRange& subresourceRange) | |
| { | |
| if((subresourceRange.aspectMask & ~(VK_IMAGE_ASPECT_DEPTH_BIT | | |
| VK_IMAGE_ASPECT_STENCIL_BIT)) != 0) | |
| { | |
| UNIMPLEMENTED("aspectMask"); | |
| } | |
| if(subresourceRange.aspectMask & VK_IMAGE_ASPECT_DEPTH_BIT) | |
| { | |
| VkImageSubresourceRange depthSubresourceRange = subresourceRange; | |
| depthSubresourceRange.aspectMask = VK_IMAGE_ASPECT_DEPTH_BIT; | |
| device->getBlitter()->clear((void*)(&color.depth), VK_FORMAT_D32_SFLOAT, this, format, depthSubresourceRange); | |
| } | |
| if(subresourceRange.aspectMask & VK_IMAGE_ASPECT_STENCIL_BIT) | |
| { | |
| VkImageSubresourceRange stencilSubresourceRange = subresourceRange; | |
| stencilSubresourceRange.aspectMask = VK_IMAGE_ASPECT_STENCIL_BIT; | |
| device->getBlitter()->clear((void*)(&color.stencil), VK_FORMAT_S8_UINT, this, format, stencilSubresourceRange); | |
| } | |
| } | |
| void Image::clear(const VkClearValue& clearValue, const vk::Format& viewFormat, const VkRect2D& renderArea, const VkImageSubresourceRange& subresourceRange) | |
| { | |
| if(!((subresourceRange.aspectMask == VK_IMAGE_ASPECT_COLOR_BIT) || | |
| (subresourceRange.aspectMask & (VK_IMAGE_ASPECT_DEPTH_BIT | | |
| VK_IMAGE_ASPECT_STENCIL_BIT)))) | |
| { | |
| UNIMPLEMENTED("subresourceRange"); | |
| } | |
| if(subresourceRange.aspectMask == VK_IMAGE_ASPECT_COLOR_BIT) | |
| { | |
| clear((void*)(clearValue.color.float32), getClearFormat(), viewFormat, subresourceRange, renderArea); | |
| } | |
| else | |
| { | |
| if(subresourceRange.aspectMask & VK_IMAGE_ASPECT_DEPTH_BIT) | |
| { | |
| VkImageSubresourceRange depthSubresourceRange = subresourceRange; | |
| depthSubresourceRange.aspectMask = VK_IMAGE_ASPECT_DEPTH_BIT; | |
| clear((void*)(&clearValue.depthStencil.depth), VK_FORMAT_D32_SFLOAT, viewFormat, depthSubresourceRange, renderArea); | |
| } | |
| if(subresourceRange.aspectMask & VK_IMAGE_ASPECT_STENCIL_BIT) | |
| { | |
| VkImageSubresourceRange stencilSubresourceRange = subresourceRange; | |
| stencilSubresourceRange.aspectMask = VK_IMAGE_ASPECT_STENCIL_BIT; | |
| clear((void*)(&clearValue.depthStencil.stencil), VK_FORMAT_S8_UINT, viewFormat, stencilSubresourceRange, renderArea); | |
| } | |
| } | |
| } | |
| void Image::prepareForSampling(const VkImageSubresourceRange& subresourceRange) | |
| { | |
| if(decompressedImage) | |
| { | |
| switch(format) | |
| { | |
| case VK_FORMAT_EAC_R11_UNORM_BLOCK: | |
| case VK_FORMAT_EAC_R11_SNORM_BLOCK: | |
| case VK_FORMAT_EAC_R11G11_UNORM_BLOCK: | |
| case VK_FORMAT_EAC_R11G11_SNORM_BLOCK: | |
| case VK_FORMAT_ETC2_R8G8B8_UNORM_BLOCK: | |
| case VK_FORMAT_ETC2_R8G8B8_SRGB_BLOCK: | |
| case VK_FORMAT_ETC2_R8G8B8A1_UNORM_BLOCK: | |
| case VK_FORMAT_ETC2_R8G8B8A1_SRGB_BLOCK: | |
| case VK_FORMAT_ETC2_R8G8B8A8_UNORM_BLOCK: | |
| case VK_FORMAT_ETC2_R8G8B8A8_SRGB_BLOCK: | |
| decodeETC2(subresourceRange); | |
| break; | |
| default: | |
| break; | |
| } | |
| } | |
| if(isCube() && (arrayLayers >= 6)) | |
| { | |
| VkImageSubresourceLayers subresourceLayers = | |
| { | |
| subresourceRange.aspectMask, | |
| subresourceRange.baseMipLevel, | |
| subresourceRange.baseArrayLayer, | |
| 6 | |
| }; | |
| uint32_t lastMipLevel = getLastMipLevel(subresourceRange); | |
| for(; subresourceLayers.mipLevel <= lastMipLevel; subresourceLayers.mipLevel++) | |
| { | |
| for(subresourceLayers.baseArrayLayer = 0; | |
| subresourceLayers.baseArrayLayer < arrayLayers; | |
| subresourceLayers.baseArrayLayer += 6) | |
| { | |
| device->getBlitter()->updateBorders(decompressedImage ? decompressedImage : this, subresourceLayers); | |
| } | |
| } | |
| } | |
| } | |
| void Image::decodeETC2(const VkImageSubresourceRange& subresourceRange) const | |
| { | |
| ASSERT(decompressedImage); | |
| ETC_Decoder::InputType inputType = GetInputType(format); | |
| uint32_t lastLayer = getLastLayerIndex(subresourceRange); | |
| uint32_t lastMipLevel = getLastMipLevel(subresourceRange); | |
| int bytes = decompressedImage->format.bytes(); | |
| bool fakeAlpha = (format == VK_FORMAT_ETC2_R8G8B8_UNORM_BLOCK) || (format == VK_FORMAT_ETC2_R8G8B8_SRGB_BLOCK); | |
| size_t sizeToWrite = 0; | |
| VkImageSubresourceLayers subresourceLayers = { subresourceRange.aspectMask, subresourceRange.baseMipLevel, subresourceRange.baseArrayLayer, 1 }; | |
| for(; subresourceLayers.baseArrayLayer <= lastLayer; subresourceLayers.baseArrayLayer++) | |
| { | |
| for(; subresourceLayers.mipLevel <= lastMipLevel; subresourceLayers.mipLevel++) | |
| { | |
| VkExtent3D mipLevelExtent = getMipLevelExtent(static_cast<VkImageAspectFlagBits>(subresourceLayers.aspectMask), subresourceLayers.mipLevel); | |
| int pitchB = decompressedImage->rowPitchBytes(VK_IMAGE_ASPECT_COLOR_BIT, subresourceLayers.mipLevel); | |
| if(fakeAlpha) | |
| { | |
| // To avoid overflow in case of cube textures, which are offset in memory to account for the border, | |
| // compute the size from the first pixel to the last pixel, excluding any padding or border before | |
| // the first pixel or after the last pixel. | |
| sizeToWrite = ((mipLevelExtent.height - 1) * pitchB) + (mipLevelExtent.width * bytes); | |
| } | |
| for(int32_t depth = 0; depth < static_cast<int32_t>(mipLevelExtent.depth); depth++) | |
| { | |
| uint8_t* source = static_cast<uint8_t*>(getTexelPointer({ 0, 0, depth }, subresourceLayers)); | |
| uint8_t* dest = static_cast<uint8_t*>(decompressedImage->getTexelPointer({ 0, 0, depth }, subresourceLayers)); | |
| if(fakeAlpha) | |
| { | |
| ASSERT((dest + sizeToWrite) < decompressedImage->end()); | |
| memset(dest, 0xFF, sizeToWrite); | |
| } | |
| ETC_Decoder::Decode(source, dest, mipLevelExtent.width, mipLevelExtent.height, | |
| mipLevelExtent.width, mipLevelExtent.height, pitchB, bytes, inputType); | |
| } | |
| } | |
| } | |
| } | |
| } // namespace vk |