| // Copyright 2016 The SwiftShader Authors. All Rights Reserved. | |
| // | |
| // Licensed under the Apache License, Version 2.0 (the "License"); | |
| // you may not use this file except in compliance with the License. | |
| // You may obtain a copy of the License at | |
| // | |
| // http://www.apache.org/licenses/LICENSE-2.0 | |
| // | |
| // Unless required by applicable law or agreed to in writing, software | |
| // distributed under the License is distributed on an "AS IS" BASIS, | |
| // WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. | |
| // See the License for the specific language governing permissions and | |
| // limitations under the License. | |
| #include "localintermediate.h" | |
| #include "SymbolTable.h" | |
| // | |
| // Two purposes: | |
| // 1. Show an example of how to iterate tree. Functions can | |
| // also directly call Traverse() on children themselves to | |
| // have finer grained control over the process than shown here. | |
| // See the last function for how to get started. | |
| // 2. Print out a text based description of the tree. | |
| // | |
| // | |
| // Use this class to carry along data from node to node in | |
| // the traversal | |
| // | |
| class TOutputTraverser : public TIntermTraverser { | |
| public: | |
| TOutputTraverser(TInfoSinkBase& i) : sink(i) { } | |
| TInfoSinkBase& sink; | |
| protected: | |
| void visitSymbol(TIntermSymbol*); | |
| void visitConstantUnion(TIntermConstantUnion*); | |
| bool visitBinary(Visit visit, TIntermBinary*); | |
| bool visitUnary(Visit visit, TIntermUnary*); | |
| bool visitSelection(Visit visit, TIntermSelection*); | |
| bool visitAggregate(Visit visit, TIntermAggregate*); | |
| bool visitLoop(Visit visit, TIntermLoop*); | |
| bool visitBranch(Visit visit, TIntermBranch*); | |
| }; | |
| TString TType::getCompleteString() const | |
| { | |
| TStringStream stream; | |
| if (qualifier != EvqTemporary && qualifier != EvqGlobal) | |
| stream << getQualifierString() << " " << getPrecisionString() << " "; | |
| if (array) | |
| stream << "array of "; | |
| if (isMatrix()) | |
| stream << static_cast<int>(primarySize) << "X" << static_cast<int>(secondarySize) << " matrix of "; | |
| else if(primarySize > 1) | |
| stream << static_cast<int>(primarySize) << "-component vector of "; | |
| stream << getBasicString(); | |
| return stream.str(); | |
| } | |
| // | |
| // Helper functions for printing, not part of traversing. | |
| // | |
| void OutputTreeText(TInfoSinkBase& sink, TIntermNode* node, const int depth) | |
| { | |
| int i; | |
| sink.location(node->getLine()); | |
| for (i = 0; i < depth; ++i) | |
| sink << " "; | |
| } | |
| // | |
| // The rest of the file are the traversal functions. The last one | |
| // is the one that starts the traversal. | |
| // | |
| // Return true from interior nodes to have the external traversal | |
| // continue on to children. If you process children yourself, | |
| // return false. | |
| // | |
| void TOutputTraverser::visitSymbol(TIntermSymbol* node) | |
| { | |
| OutputTreeText(sink, node, mDepth); | |
| sink << "'" << node->getSymbol() << "' "; | |
| sink << "(" << node->getCompleteString() << ")\n"; | |
| } | |
| bool TOutputTraverser::visitBinary(Visit visit, TIntermBinary* node) | |
| { | |
| TInfoSinkBase& out = sink; | |
| OutputTreeText(out, node, mDepth); | |
| switch (node->getOp()) { | |
| case EOpAssign: out << "move second child to first child"; break; | |
| case EOpInitialize: out << "initialize first child with second child"; break; | |
| case EOpAddAssign: out << "add second child into first child"; break; | |
| case EOpSubAssign: out << "subtract second child into first child"; break; | |
| case EOpMulAssign: out << "multiply second child into first child"; break; | |
| case EOpVectorTimesMatrixAssign: out << "matrix mult second child into first child"; break; | |
| case EOpVectorTimesScalarAssign: out << "vector scale second child into first child"; break; | |
| case EOpMatrixTimesScalarAssign: out << "matrix scale second child into first child"; break; | |
| case EOpMatrixTimesMatrixAssign: out << "matrix mult second child into first child"; break; | |
| case EOpDivAssign: out << "divide second child into first child"; break; | |
| case EOpIModAssign: out << "modulo second child into first child"; break; | |
| case EOpBitShiftLeftAssign: out << "bit-wise shift first child left by second child"; break; | |
| case EOpBitShiftRightAssign: out << "bit-wise shift first child right by second child"; break; | |
| case EOpBitwiseAndAssign: out << "bit-wise and second child into first child"; break; | |
| case EOpBitwiseXorAssign: out << "bit-wise xor second child into first child"; break; | |
| case EOpBitwiseOrAssign: out << "bit-wise or second child into first child"; break; | |
| case EOpIndexDirect: out << "direct index"; break; | |
| case EOpIndexIndirect: out << "indirect index"; break; | |
| case EOpIndexDirectStruct: out << "direct index for structure"; break; | |
| case EOpVectorSwizzle: out << "vector swizzle"; break; | |
| case EOpAdd: out << "add"; break; | |
| case EOpSub: out << "subtract"; break; | |
| case EOpMul: out << "component-wise multiply"; break; | |
| case EOpDiv: out << "divide"; break; | |
| case EOpIMod: out << "modulo"; break; | |
| case EOpBitShiftLeft: out << "bit-wise shift left"; break; | |
| case EOpBitShiftRight: out << "bit-wise shift right"; break; | |
| case EOpBitwiseAnd: out << "bit-wise and"; break; | |
| case EOpBitwiseXor: out << "bit-wise xor"; break; | |
| case EOpBitwiseOr: out << "bit-wise or"; break; | |
| case EOpEqual: out << "Compare Equal"; break; | |
| case EOpNotEqual: out << "Compare Not Equal"; break; | |
| case EOpLessThan: out << "Compare Less Than"; break; | |
| case EOpGreaterThan: out << "Compare Greater Than"; break; | |
| case EOpLessThanEqual: out << "Compare Less Than or Equal"; break; | |
| case EOpGreaterThanEqual: out << "Compare Greater Than or Equal"; break; | |
| case EOpVectorTimesScalar: out << "vector-scale"; break; | |
| case EOpVectorTimesMatrix: out << "vector-times-matrix"; break; | |
| case EOpMatrixTimesVector: out << "matrix-times-vector"; break; | |
| case EOpMatrixTimesScalar: out << "matrix-scale"; break; | |
| case EOpMatrixTimesMatrix: out << "matrix-multiply"; break; | |
| case EOpLogicalOr: out << "logical-or"; break; | |
| case EOpLogicalXor: out << "logical-xor"; break; | |
| case EOpLogicalAnd: out << "logical-and"; break; | |
| default: out << "<unknown op>"; | |
| } | |
| out << " (" << node->getCompleteString() << ")"; | |
| out << "\n"; | |
| return true; | |
| } | |
| bool TOutputTraverser::visitUnary(Visit visit, TIntermUnary* node) | |
| { | |
| TInfoSinkBase& out = sink; | |
| OutputTreeText(out, node, mDepth); | |
| switch (node->getOp()) { | |
| case EOpNegative: out << "Negate value"; break; | |
| case EOpVectorLogicalNot: | |
| case EOpLogicalNot: out << "Negate conditional"; break; | |
| case EOpBitwiseNot: out << "bit-wise not"; break; | |
| case EOpPostIncrement: out << "Post-Increment"; break; | |
| case EOpPostDecrement: out << "Post-Decrement"; break; | |
| case EOpPreIncrement: out << "Pre-Increment"; break; | |
| case EOpPreDecrement: out << "Pre-Decrement"; break; | |
| case EOpRadians: out << "radians"; break; | |
| case EOpDegrees: out << "degrees"; break; | |
| case EOpSin: out << "sine"; break; | |
| case EOpCos: out << "cosine"; break; | |
| case EOpTan: out << "tangent"; break; | |
| case EOpAsin: out << "arc sine"; break; | |
| case EOpAcos: out << "arc cosine"; break; | |
| case EOpAtan: out << "arc tangent"; break; | |
| case EOpSinh: out << "hyperbolic sine"; break; | |
| case EOpCosh: out << "hyperbolic cosine"; break; | |
| case EOpTanh: out << "hyperbolic tangent"; break; | |
| case EOpAsinh: out << "arc hyperbolic sine"; break; | |
| case EOpAcosh: out << "arc hyperbolic cosine"; break; | |
| case EOpAtanh: out << "arc hyperbolic tangent"; break; | |
| case EOpExp: out << "exp"; break; | |
| case EOpLog: out << "log"; break; | |
| case EOpExp2: out << "exp2"; break; | |
| case EOpLog2: out << "log2"; break; | |
| case EOpSqrt: out << "sqrt"; break; | |
| case EOpInverseSqrt: out << "inverse sqrt"; break; | |
| case EOpAbs: out << "Absolute value"; break; | |
| case EOpSign: out << "Sign"; break; | |
| case EOpFloor: out << "Floor"; break; | |
| case EOpTrunc: out << "Trunc"; break; | |
| case EOpRound: out << "Round"; break; | |
| case EOpRoundEven: out << "RoundEven"; break; | |
| case EOpCeil: out << "Ceiling"; break; | |
| case EOpFract: out << "Fraction"; break; | |
| case EOpIsNan: out << "Is not a number"; break; | |
| case EOpIsInf: out << "Is infinity"; break; | |
| case EOpFloatBitsToInt: out << "float bits to int"; break; | |
| case EOpFloatBitsToUint: out << "float bits to uint"; break; | |
| case EOpIntBitsToFloat: out << "int bits to float"; break; | |
| case EOpUintBitsToFloat: out << "uint bits to float"; break; | |
| case EOpPackSnorm2x16: out << "pack Snorm 2x16"; break; | |
| case EOpPackUnorm2x16: out << "pack Unorm 2x16"; break; | |
| case EOpPackHalf2x16: out << "pack half 2x16"; break; | |
| case EOpUnpackSnorm2x16: out << "unpack Snorm 2x16"; break; | |
| case EOpUnpackUnorm2x16: out << "unpack Unorm 2x16"; break; | |
| case EOpUnpackHalf2x16: out << "unpack half 2x16"; break; | |
| case EOpLength: out << "length"; break; | |
| case EOpNormalize: out << "normalize"; break; | |
| // case EOpDPdx: out << "dPdx"; break; | |
| // case EOpDPdy: out << "dPdy"; break; | |
| // case EOpFwidth: out << "fwidth"; break; | |
| case EOpDeterminant: out << "determinant"; break; | |
| case EOpTranspose: out << "transpose"; break; | |
| case EOpInverse: out << "inverse"; break; | |
| case EOpAny: out << "any"; break; | |
| case EOpAll: out << "all"; break; | |
| default: out.message(EPrefixError, "Bad unary op"); | |
| } | |
| out << " (" << node->getCompleteString() << ")"; | |
| out << "\n"; | |
| return true; | |
| } | |
| bool TOutputTraverser::visitAggregate(Visit visit, TIntermAggregate* node) | |
| { | |
| TInfoSinkBase& out = sink; | |
| if (node->getOp() == EOpNull) { | |
| out.message(EPrefixError, "node is still EOpNull!"); | |
| return true; | |
| } | |
| OutputTreeText(out, node, mDepth); | |
| switch (node->getOp()) { | |
| case EOpSequence: out << "Sequence\n"; return true; | |
| case EOpComma: out << "Comma\n"; return true; | |
| case EOpFunction: out << "Function Definition: " << node->getName(); break; | |
| case EOpFunctionCall: out << "Function Call: " << node->getName(); break; | |
| case EOpParameters: out << "Function Parameters: "; break; | |
| case EOpConstructFloat: out << "Construct float"; break; | |
| case EOpConstructVec2: out << "Construct vec2"; break; | |
| case EOpConstructVec3: out << "Construct vec3"; break; | |
| case EOpConstructVec4: out << "Construct vec4"; break; | |
| case EOpConstructBool: out << "Construct bool"; break; | |
| case EOpConstructBVec2: out << "Construct bvec2"; break; | |
| case EOpConstructBVec3: out << "Construct bvec3"; break; | |
| case EOpConstructBVec4: out << "Construct bvec4"; break; | |
| case EOpConstructInt: out << "Construct int"; break; | |
| case EOpConstructIVec2: out << "Construct ivec2"; break; | |
| case EOpConstructIVec3: out << "Construct ivec3"; break; | |
| case EOpConstructIVec4: out << "Construct ivec4"; break; | |
| case EOpConstructUInt: out << "Construct uint"; break; | |
| case EOpConstructUVec2: out << "Construct uvec2"; break; | |
| case EOpConstructUVec3: out << "Construct uvec3"; break; | |
| case EOpConstructUVec4: out << "Construct uvec4"; break; | |
| case EOpConstructMat2: out << "Construct mat2"; break; | |
| case EOpConstructMat2x3: out << "Construct mat2x3"; break; | |
| case EOpConstructMat2x4: out << "Construct mat2x4"; break; | |
| case EOpConstructMat3x2: out << "Construct mat3x2"; break; | |
| case EOpConstructMat3: out << "Construct mat3"; break; | |
| case EOpConstructMat3x4: out << "Construct mat3x4"; break; | |
| case EOpConstructMat4x2: out << "Construct mat4x2"; break; | |
| case EOpConstructMat4x3: out << "Construct mat4x3"; break; | |
| case EOpConstructMat4: out << "Construct mat4"; break; | |
| case EOpConstructStruct: out << "Construct structure"; break; | |
| case EOpLessThan: out << "Compare Less Than"; break; | |
| case EOpGreaterThan: out << "Compare Greater Than"; break; | |
| case EOpLessThanEqual: out << "Compare Less Than or Equal"; break; | |
| case EOpGreaterThanEqual: out << "Compare Greater Than or Equal"; break; | |
| case EOpVectorEqual: out << "Equal"; break; | |
| case EOpVectorNotEqual: out << "NotEqual"; break; | |
| case EOpMod: out << "mod"; break; | |
| case EOpModf: out << "modf"; break; | |
| case EOpPow: out << "pow"; break; | |
| case EOpAtan: out << "arc tangent"; break; | |
| case EOpMin: out << "min"; break; | |
| case EOpMax: out << "max"; break; | |
| case EOpClamp: out << "clamp"; break; | |
| case EOpMix: out << "mix"; break; | |
| case EOpStep: out << "step"; break; | |
| case EOpSmoothStep: out << "smoothstep"; break; | |
| case EOpFloatBitsToInt: out << "floatBitsToInt"; break; | |
| case EOpFloatBitsToUint: out << "floatBitsToUint"; break; | |
| case EOpIntBitsToFloat: out << "intBitsToFloat"; break; | |
| case EOpUintBitsToFloat: out << "uintBitsToFloat"; break; | |
| case EOpDistance: out << "distance"; break; | |
| case EOpDot: out << "dot-product"; break; | |
| case EOpCross: out << "cross-product"; break; | |
| case EOpFaceForward: out << "face-forward"; break; | |
| case EOpReflect: out << "reflect"; break; | |
| case EOpRefract: out << "refract"; break; | |
| case EOpMul: out << "component-wise multiply"; break; | |
| case EOpOuterProduct: out << "outer product"; break; | |
| case EOpDeclaration: out << "Declaration"; break; | |
| default: out.message(EPrefixError, "Bad aggregation op"); | |
| } | |
| if (node->getOp() != EOpSequence && node->getOp() != EOpParameters) | |
| out << " (" << node->getCompleteString() << ")"; | |
| out << "\n"; | |
| return true; | |
| } | |
| bool TOutputTraverser::visitSelection(Visit visit, TIntermSelection* node) | |
| { | |
| TInfoSinkBase& out = sink; | |
| OutputTreeText(out, node, mDepth); | |
| out << "Test condition and select"; | |
| out << " (" << node->getCompleteString() << ")\n"; | |
| ++mDepth; | |
| OutputTreeText(sink, node, mDepth); | |
| out << "Condition\n"; | |
| node->getCondition()->traverse(this); | |
| OutputTreeText(sink, node, mDepth); | |
| if (node->getTrueBlock()) { | |
| out << "true case\n"; | |
| node->getTrueBlock()->traverse(this); | |
| } else | |
| out << "true case is null\n"; | |
| if (node->getFalseBlock()) { | |
| OutputTreeText(sink, node, mDepth); | |
| out << "false case\n"; | |
| node->getFalseBlock()->traverse(this); | |
| } | |
| --mDepth; | |
| return false; | |
| } | |
| void TOutputTraverser::visitConstantUnion(TIntermConstantUnion* node) | |
| { | |
| TInfoSinkBase& out = sink; | |
| size_t size = node->getType().getObjectSize(); | |
| for(size_t i = 0; i < size; i++) { | |
| OutputTreeText(out, node, mDepth); | |
| switch (node->getUnionArrayPointer()[i].getType()) { | |
| case EbtBool: | |
| if (node->getUnionArrayPointer()[i].getBConst()) | |
| out << "true"; | |
| else | |
| out << "false"; | |
| out << " (" << "const bool" << ")"; | |
| out << "\n"; | |
| break; | |
| case EbtFloat: | |
| out << node->getUnionArrayPointer()[i].getFConst(); | |
| out << " (const float)\n"; | |
| break; | |
| case EbtInt: | |
| out << node->getUnionArrayPointer()[i].getIConst(); | |
| out << " (const int)\n"; | |
| break; | |
| case EbtUInt: | |
| out << node->getUnionArrayPointer()[i].getUConst(); | |
| out << " (const uint)\n"; | |
| break; | |
| default: | |
| out.message(EPrefixInternalError, "Unknown constant", node->getLine()); | |
| break; | |
| } | |
| } | |
| } | |
| bool TOutputTraverser::visitLoop(Visit visit, TIntermLoop* node) | |
| { | |
| TInfoSinkBase& out = sink; | |
| OutputTreeText(out, node, mDepth); | |
| out << "Loop with condition "; | |
| if (node->getType() == ELoopDoWhile) | |
| out << "not "; | |
| out << "tested first\n"; | |
| ++mDepth; | |
| OutputTreeText(sink, node, mDepth); | |
| if (node->getCondition()) { | |
| out << "Loop Condition\n"; | |
| node->getCondition()->traverse(this); | |
| } else | |
| out << "No loop condition\n"; | |
| OutputTreeText(sink, node, mDepth); | |
| if (node->getBody()) { | |
| out << "Loop Body\n"; | |
| node->getBody()->traverse(this); | |
| } else | |
| out << "No loop body\n"; | |
| if (node->getExpression()) { | |
| OutputTreeText(sink, node, mDepth); | |
| out << "Loop Terminal Expression\n"; | |
| node->getExpression()->traverse(this); | |
| } | |
| --mDepth; | |
| return false; | |
| } | |
| bool TOutputTraverser::visitBranch(Visit visit, TIntermBranch* node) | |
| { | |
| TInfoSinkBase& out = sink; | |
| OutputTreeText(out, node, mDepth); | |
| switch (node->getFlowOp()) { | |
| case EOpKill: out << "Branch: Kill"; break; | |
| case EOpBreak: out << "Branch: Break"; break; | |
| case EOpContinue: out << "Branch: Continue"; break; | |
| case EOpReturn: out << "Branch: Return"; break; | |
| default: out << "Branch: Unknown Branch"; break; | |
| } | |
| if (node->getExpression()) { | |
| out << " with expression\n"; | |
| ++mDepth; | |
| node->getExpression()->traverse(this); | |
| --mDepth; | |
| } else | |
| out << "\n"; | |
| return false; | |
| } | |
| // | |
| // This function is the one to call externally to start the traversal. | |
| // Individual functions can be initialized to 0 to skip processing of that | |
| // type of node. It's children will still be processed. | |
| // | |
| void TIntermediate::outputTree(TIntermNode* root) | |
| { | |
| if (root == 0) | |
| return; | |
| TOutputTraverser it(infoSink.info); | |
| root->traverse(&it); | |
| } |