blob: e8a1a2fff9195993fcab6cf4ddacfb14c18630ab [file] [log] [blame]
//===- DependenceGraphBuilder.cpp ------------------------------------------==//
// Part of the LLVM Project, under the Apache License v2.0 with LLVM Exceptions.
// See for license information.
// SPDX-License-Identifier: Apache-2.0 WITH LLVM-exception
// This file implements common steps of the build algorithm for construction
// of dependence graphs such as DDG and PDG.
#include "llvm/Analysis/DependenceGraphBuilder.h"
#include "llvm/ADT/EnumeratedArray.h"
#include "llvm/ADT/SCCIterator.h"
#include "llvm/ADT/Statistic.h"
#include "llvm/Analysis/DDG.h"
using namespace llvm;
#define DEBUG_TYPE "dgb"
STATISTIC(TotalGraphs, "Number of dependence graphs created.");
STATISTIC(TotalDefUseEdges, "Number of def-use edges created.");
STATISTIC(TotalMemoryEdges, "Number of memory dependence edges created.");
STATISTIC(TotalFineGrainedNodes, "Number of fine-grained nodes created.");
STATISTIC(TotalPiBlockNodes, "Number of pi-block nodes created.");
"Number of confused memory dependencies between two nodes.");
"Number of times the source and sink of dependence was reversed to "
"expose cycles in the graph.");
using InstructionListType = SmallVector<Instruction *, 2>;
// AbstractDependenceGraphBuilder implementation
template <class G>
void AbstractDependenceGraphBuilder<G>::computeInstructionOrdinals() {
// The BBList is expected to be in program order.
size_t NextOrdinal = 1;
for (auto *BB : BBList)
for (auto &I : *BB)
InstOrdinalMap.insert(std::make_pair(&I, NextOrdinal++));
template <class G>
void AbstractDependenceGraphBuilder<G>::createFineGrainedNodes() {
assert(IMap.empty() && "Expected empty instruction map at start");
for (BasicBlock *BB : BBList)
for (Instruction &I : *BB) {
auto &NewNode = createFineGrainedNode(I);
IMap.insert(std::make_pair(&I, &NewNode));
NodeOrdinalMap.insert(std::make_pair(&NewNode, getOrdinal(I)));
template <class G>
void AbstractDependenceGraphBuilder<G>::createAndConnectRootNode() {
// Create a root node that connects to every connected component of the graph.
// This is done to allow graph iterators to visit all the disjoint components
// of the graph, in a single walk.
// This algorithm works by going through each node of the graph and for each
// node N, do a DFS starting from N. A rooted edge is established between the
// root node and N (if N is not yet visited). All the nodes reachable from N
// are marked as visited and are skipped in the DFS of subsequent nodes.
// Note: This algorithm tries to limit the number of edges out of the root
// node to some extent, but there may be redundant edges created depending on
// the iteration order. For example for a graph {A -> B}, an edge from the
// root node is added to both nodes if B is visited before A. While it does
// not result in minimal number of edges, this approach saves compile-time
// while keeping the number of edges in check.
auto &RootNode = createRootNode();
df_iterator_default_set<const NodeType *, 4> Visited;
for (auto *N : Graph) {
if (*N == RootNode)
for (auto I : depth_first_ext(N, Visited))
if (I == N)
createRootedEdge(RootNode, *N);
template <class G> void AbstractDependenceGraphBuilder<G>::createPiBlocks() {
if (!shouldCreatePiBlocks())
LLVM_DEBUG(dbgs() << "==== Start of Creation of Pi-Blocks ===\n");
// The overall algorithm is as follows:
// 1. Identify SCCs and for each SCC create a pi-block node containing all
// the nodes in that SCC.
// 2. Identify incoming edges incident to the nodes inside of the SCC and
// reconnect them to the pi-block node.
// 3. Identify outgoing edges from the nodes inside of the SCC to nodes
// outside of it and reconnect them so that the edges are coming out of the
// SCC node instead.
// Adding nodes as we iterate through the SCCs cause the SCC
// iterators to get invalidated. To prevent this invalidation, we first
// collect a list of nodes that are part of an SCC, and then iterate over
// those lists to create the pi-block nodes. Each element of the list is a
// list of nodes in an SCC. Note: trivial SCCs containing a single node are
// ignored.
SmallVector<NodeListType, 4> ListOfSCCs;
for (auto &SCC : make_range(scc_begin(&Graph), scc_end(&Graph))) {
if (SCC.size() > 1)
ListOfSCCs.emplace_back(SCC.begin(), SCC.end());
for (NodeListType &NL : ListOfSCCs) {
LLVM_DEBUG(dbgs() << "Creating pi-block node with " << NL.size()
<< " nodes in it.\n");
// SCC iterator may put the nodes in an order that's different from the
// program order. To preserve original program order, we sort the list of
// nodes based on ordinal numbers computed earlier.
llvm::sort(NL, [&](NodeType *LHS, NodeType *RHS) {
return getOrdinal(*LHS) < getOrdinal(*RHS);
NodeType &PiNode = createPiBlock(NL);
// Build a set to speed up the lookup for edges whose targets
// are inside the SCC.
SmallPtrSet<NodeType *, 4> NodesInSCC(NL.begin(), NL.end());
// We have the set of nodes in the SCC. We go through the set of nodes
// that are outside of the SCC and look for edges that cross the two sets.
for (NodeType *N : Graph) {
// Skip the SCC node and all the nodes inside of it.
if (*N == PiNode || NodesInSCC.count(N))
for (NodeType *SCCNode : NL) {
enum Direction {
Incoming, // Incoming edges to the SCC
Outgoing, // Edges going ot of the SCC
DirectionCount // To make the enum usable as an array index.
// Use these flags to help us avoid creating redundant edges. If there
// are more than one edges from an outside node to inside nodes, we only
// keep one edge from that node to the pi-block node. Similarly, if
// there are more than one edges from inside nodes to an outside node,
// we only keep one edge from the pi-block node to the outside node.
// There is a flag defined for each direction (incoming vs outgoing) and
// for each type of edge supported, using a two-dimensional boolean
// array.
using EdgeKind = typename EdgeType::EdgeKind;
EnumeratedArray<bool, EdgeKind> EdgeAlreadyCreated[DirectionCount]{
false, false};
auto createEdgeOfKind = [this](NodeType &Src, NodeType &Dst,
const EdgeKind K) {
switch (K) {
case EdgeKind::RegisterDefUse:
createDefUseEdge(Src, Dst);
case EdgeKind::MemoryDependence:
createMemoryEdge(Src, Dst);
case EdgeKind::Rooted:
createRootedEdge(Src, Dst);
llvm_unreachable("Unsupported type of edge.");
auto reconnectEdges = [&](NodeType *Src, NodeType *Dst, NodeType *New,
const Direction Dir) {
if (!Src->hasEdgeTo(*Dst))
<< "reconnecting("
<< (Dir == Direction::Incoming ? "incoming)" : "outgoing)")
<< ":\nSrc:" << *Src << "\nDst:" << *Dst
<< "\nNew:" << *New << "\n");
assert((Dir == Direction::Incoming || Dir == Direction::Outgoing) &&
"Invalid direction.");
SmallVector<EdgeType *, 10> EL;
Src->findEdgesTo(*Dst, EL);
for (EdgeType *OldEdge : EL) {
EdgeKind Kind = OldEdge->getKind();
if (!EdgeAlreadyCreated[Dir][Kind]) {
if (Dir == Direction::Incoming) {
createEdgeOfKind(*Src, *New, Kind);
LLVM_DEBUG(dbgs() << "created edge from Src to New.\n");
} else if (Dir == Direction::Outgoing) {
createEdgeOfKind(*New, *Dst, Kind);
LLVM_DEBUG(dbgs() << "created edge from New to Dst.\n");
EdgeAlreadyCreated[Dir][Kind] = true;
LLVM_DEBUG(dbgs() << "removed old edge between Src and Dst.\n\n");
// Process incoming edges incident to the pi-block node.
reconnectEdges(N, SCCNode, &PiNode, Direction::Incoming);
// Process edges that are coming out of the pi-block node.
reconnectEdges(SCCNode, N, &PiNode, Direction::Outgoing);
// Ordinal maps are no longer needed.
LLVM_DEBUG(dbgs() << "==== End of Creation of Pi-Blocks ===\n");
template <class G> void AbstractDependenceGraphBuilder<G>::createDefUseEdges() {
for (NodeType *N : Graph) {
InstructionListType SrcIList;
N->collectInstructions([](const Instruction *I) { return true; }, SrcIList);
// Use a set to mark the targets that we link to N, so we don't add
// duplicate def-use edges when more than one instruction in a target node
// use results of instructions that are contained in N.
SmallPtrSet<NodeType *, 4> VisitedTargets;
for (Instruction *II : SrcIList) {
for (User *U : II->users()) {
Instruction *UI = dyn_cast<Instruction>(U);
if (!UI)
NodeType *DstNode = nullptr;
if (IMap.find(UI) != IMap.end())
DstNode = IMap.find(UI)->second;
// In the case of loops, the scope of the subgraph is all the
// basic blocks (and instructions within them) belonging to the loop. We
// simply ignore all the edges coming from (or going into) instructions
// or basic blocks outside of this range.
if (!DstNode) {
<< "skipped def-use edge since the sink" << *UI
<< " is outside the range of instructions being considered.\n");
// Self dependencies are ignored because they are redundant and
// uninteresting.
if (DstNode == N) {
<< "skipped def-use edge since the sink and the source ("
<< N << ") are the same.\n");
if (VisitedTargets.insert(DstNode).second) {
createDefUseEdge(*N, *DstNode);
template <class G>
void AbstractDependenceGraphBuilder<G>::createMemoryDependencyEdges() {
using DGIterator = typename G::iterator;
auto isMemoryAccess = [](const Instruction *I) {
return I->mayReadOrWriteMemory();
for (DGIterator SrcIt = Graph.begin(), E = Graph.end(); SrcIt != E; ++SrcIt) {
InstructionListType SrcIList;
(*SrcIt)->collectInstructions(isMemoryAccess, SrcIList);
if (SrcIList.empty())
for (DGIterator DstIt = SrcIt; DstIt != E; ++DstIt) {
if (**SrcIt == **DstIt)
InstructionListType DstIList;
(*DstIt)->collectInstructions(isMemoryAccess, DstIList);
if (DstIList.empty())
bool ForwardEdgeCreated = false;
bool BackwardEdgeCreated = false;
for (Instruction *ISrc : SrcIList) {
for (Instruction *IDst : DstIList) {
auto D = DI.depends(ISrc, IDst, true);
if (!D)
// If we have a dependence with its left-most non-'=' direction
// being '>' we need to reverse the direction of the edge, because
// the source of the dependence cannot occur after the sink. For
// confused dependencies, we will create edges in both directions to
// represent the possibility of a cycle.
auto createConfusedEdges = [&](NodeType &Src, NodeType &Dst) {
if (!ForwardEdgeCreated) {
createMemoryEdge(Src, Dst);
if (!BackwardEdgeCreated) {
createMemoryEdge(Dst, Src);
ForwardEdgeCreated = BackwardEdgeCreated = true;
auto createForwardEdge = [&](NodeType &Src, NodeType &Dst) {
if (!ForwardEdgeCreated) {
createMemoryEdge(Src, Dst);
ForwardEdgeCreated = true;
auto createBackwardEdge = [&](NodeType &Src, NodeType &Dst) {
if (!BackwardEdgeCreated) {
createMemoryEdge(Dst, Src);
BackwardEdgeCreated = true;
if (D->isConfused())
createConfusedEdges(**SrcIt, **DstIt);
else if (D->isOrdered() && !D->isLoopIndependent()) {
bool ReversedEdge = false;
for (unsigned Level = 1; Level <= D->getLevels(); ++Level) {
if (D->getDirection(Level) == Dependence::DVEntry::EQ)
else if (D->getDirection(Level) == Dependence::DVEntry::GT) {
createBackwardEdge(**SrcIt, **DstIt);
ReversedEdge = true;
} else if (D->getDirection(Level) == Dependence::DVEntry::LT)
else {
createConfusedEdges(**SrcIt, **DstIt);
if (!ReversedEdge)
createForwardEdge(**SrcIt, **DstIt);
} else
createForwardEdge(**SrcIt, **DstIt);
// Avoid creating duplicate edges.
if (ForwardEdgeCreated && BackwardEdgeCreated)
// If we've created edges in both directions, there is no more
// unique edge that we can create between these two nodes, so we
// can exit early.
if (ForwardEdgeCreated && BackwardEdgeCreated)
template <class G>
void AbstractDependenceGraphBuilder<G>::sortNodesTopologically() {
// If we don't create pi-blocks, then we may not have a DAG.
if (!shouldCreatePiBlocks())
SmallVector<NodeType *, 64> NodesInPO;
using NodeKind = typename NodeType::NodeKind;
for (NodeType *N : post_order(&Graph)) {
if (N->getKind() == NodeKind::PiBlock) {
// Put members of the pi-block right after the pi-block itself, for
// convenience.
const NodeListType &PiBlockMembers = getNodesInPiBlock(*N);
NodesInPO.insert(NodesInPO.end(), PiBlockMembers.begin(),
size_t OldSize = Graph.Nodes.size();
for (NodeType *N : reverse(NodesInPO))
if (Graph.Nodes.size() != OldSize)
assert(false &&
"Expected the number of nodes to stay the same after the sort");
template class llvm::AbstractDependenceGraphBuilder<DataDependenceGraph>;
template class llvm::DependenceGraphInfo<DDGNode>;