// Copyright (c) 2018 Google LLC.
// Modifications Copyright (C) 2024 Advanced Micro Devices, Inc. All rights
// reserved.
//
// Licensed under the Apache License, Version 2.0 (the "License");
// you may not use this file except in compliance with the License.
// You may obtain a copy of the License at
//
//     http://www.apache.org/licenses/LICENSE-2.0
//
// Unless required by applicable law or agreed to in writing, software
// distributed under the License is distributed on an "AS IS" BASIS,
// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
// See the License for the specific language governing permissions and
// limitations under the License.
//
#include <algorithm>

#include "source/opcode.h"
#include "source/spirv_target_env.h"
#include "source/table2.h"
#include "source/val/instruction.h"
#include "source/val/validate.h"
#include "source/val/validation_state.h"

namespace spvtools {
namespace val {
namespace {

spv_result_t ValidateEntryPoint(ValidationState_t& _, const Instruction* inst) {
  const auto entry_point_id = inst->GetOperandAs<uint32_t>(1);
  auto entry_point = _.FindDef(entry_point_id);
  if (!entry_point || spv::Op::OpFunction != entry_point->opcode()) {
    return _.diag(SPV_ERROR_INVALID_ID, inst)
           << "OpEntryPoint Entry Point <id> " << _.getIdName(entry_point_id)
           << " is not a function.";
  }

  // Only check the shader execution models
  const spv::ExecutionModel execution_model =
      inst->GetOperandAs<spv::ExecutionModel>(0);
  if (execution_model != spv::ExecutionModel::Kernel) {
    const auto entry_point_type_id = entry_point->GetOperandAs<uint32_t>(3);
    const auto entry_point_type = _.FindDef(entry_point_type_id);
    if (!entry_point_type || 3 != entry_point_type->words().size()) {
      return _.diag(SPV_ERROR_INVALID_ID, inst)
             << _.VkErrorID(4633) << "OpEntryPoint Entry Point <id> "
             << _.getIdName(entry_point_id)
             << "s function parameter count is not zero.";
    }
  }

  auto return_type = _.FindDef(entry_point->type_id());
  if (!return_type || spv::Op::OpTypeVoid != return_type->opcode()) {
    return _.diag(SPV_ERROR_INVALID_ID, inst)
           << _.VkErrorID(4633) << "OpEntryPoint Entry Point <id> "
           << _.getIdName(entry_point_id)
           << "s function return type is not void.";
  }

  const auto* execution_modes = _.GetExecutionModes(entry_point_id);
  if (_.HasCapability(spv::Capability::Shader)) {
    switch (execution_model) {
      case spv::ExecutionModel::Fragment:
        if (execution_modes &&
            execution_modes->count(spv::ExecutionMode::OriginUpperLeft) &&
            execution_modes->count(spv::ExecutionMode::OriginLowerLeft)) {
          return _.diag(SPV_ERROR_INVALID_DATA, inst)
                 << "Fragment execution model entry points can only specify "
                    "one of OriginUpperLeft or OriginLowerLeft execution "
                    "modes.";
        }
        if (!execution_modes ||
            (!execution_modes->count(spv::ExecutionMode::OriginUpperLeft) &&
             !execution_modes->count(spv::ExecutionMode::OriginLowerLeft))) {
          return _.diag(SPV_ERROR_INVALID_DATA, inst)
                 << "Fragment execution model entry points require either an "
                    "OriginUpperLeft or OriginLowerLeft execution mode.";
        }
        if (execution_modes &&
            1 < std::count_if(execution_modes->begin(), execution_modes->end(),
                              [](const spv::ExecutionMode& mode) {
                                switch (mode) {
                                  case spv::ExecutionMode::DepthGreater:
                                  case spv::ExecutionMode::DepthLess:
                                  case spv::ExecutionMode::DepthUnchanged:
                                    return true;
                                  default:
                                    return false;
                                }
                              })) {
          return _.diag(SPV_ERROR_INVALID_DATA, inst)
                 << "Fragment execution model entry points can specify at most "
                    "one of DepthGreater, DepthLess or DepthUnchanged "
                    "execution modes.";
        }
        if (execution_modes &&
            1 < std::count_if(
                    execution_modes->begin(), execution_modes->end(),
                    [](const spv::ExecutionMode& mode) {
                      switch (mode) {
                        case spv::ExecutionMode::PixelInterlockOrderedEXT:
                        case spv::ExecutionMode::PixelInterlockUnorderedEXT:
                        case spv::ExecutionMode::SampleInterlockOrderedEXT:
                        case spv::ExecutionMode::SampleInterlockUnorderedEXT:
                        case spv::ExecutionMode::ShadingRateInterlockOrderedEXT:
                        case spv::ExecutionMode::
                            ShadingRateInterlockUnorderedEXT:
                          return true;
                        default:
                          return false;
                      }
                    })) {
          return _.diag(SPV_ERROR_INVALID_DATA, inst)
                 << "Fragment execution model entry points can specify at most "
                    "one fragment shader interlock execution mode.";
        }
        if (execution_modes &&
            1 < std::count_if(
                    execution_modes->begin(), execution_modes->end(),
                    [](const spv::ExecutionMode& mode) {
                      switch (mode) {
                        case spv::ExecutionMode::StencilRefUnchangedFrontAMD:
                        case spv::ExecutionMode::StencilRefLessFrontAMD:
                        case spv::ExecutionMode::StencilRefGreaterFrontAMD:
                          return true;
                        default:
                          return false;
                      }
                    })) {
          return _.diag(SPV_ERROR_INVALID_DATA, inst)
                 << "Fragment execution model entry points can specify at most "
                    "one of StencilRefUnchangedFrontAMD, "
                    "StencilRefLessFrontAMD or StencilRefGreaterFrontAMD "
                    "execution modes.";
        }
        if (execution_modes &&
            1 < std::count_if(
                    execution_modes->begin(), execution_modes->end(),
                    [](const spv::ExecutionMode& mode) {
                      switch (mode) {
                        case spv::ExecutionMode::StencilRefUnchangedBackAMD:
                        case spv::ExecutionMode::StencilRefLessBackAMD:
                        case spv::ExecutionMode::StencilRefGreaterBackAMD:
                          return true;
                        default:
                          return false;
                      }
                    })) {
          return _.diag(SPV_ERROR_INVALID_DATA, inst)
                 << "Fragment execution model entry points can specify at most "
                    "one of StencilRefUnchangedBackAMD, "
                    "StencilRefLessBackAMD or StencilRefGreaterBackAMD "
                    "execution modes.";
        }
        break;
      case spv::ExecutionModel::TessellationControl:
      case spv::ExecutionModel::TessellationEvaluation:
        if (execution_modes &&
            1 < std::count_if(
                    execution_modes->begin(), execution_modes->end(),
                    [](const spv::ExecutionMode& mode) {
                      switch (mode) {
                        case spv::ExecutionMode::SpacingEqual:
                        case spv::ExecutionMode::SpacingFractionalEven:
                        case spv::ExecutionMode::SpacingFractionalOdd:
                          return true;
                        default:
                          return false;
                      }
                    })) {
          return _.diag(SPV_ERROR_INVALID_DATA, inst)
                 << "Tessellation execution model entry points can specify at "
                    "most one of SpacingEqual, SpacingFractionalOdd or "
                    "SpacingFractionalEven execution modes.";
        }
        if (execution_modes &&
            1 < std::count_if(execution_modes->begin(), execution_modes->end(),
                              [](const spv::ExecutionMode& mode) {
                                switch (mode) {
                                  case spv::ExecutionMode::Triangles:
                                  case spv::ExecutionMode::Quads:
                                  case spv::ExecutionMode::Isolines:
                                    return true;
                                  default:
                                    return false;
                                }
                              })) {
          return _.diag(SPV_ERROR_INVALID_DATA, inst)
                 << "Tessellation execution model entry points can specify at "
                    "most one of Triangles, Quads or Isolines execution modes.";
        }
        if (execution_modes &&
            1 < std::count_if(execution_modes->begin(), execution_modes->end(),
                              [](const spv::ExecutionMode& mode) {
                                switch (mode) {
                                  case spv::ExecutionMode::VertexOrderCw:
                                  case spv::ExecutionMode::VertexOrderCcw:
                                    return true;
                                  default:
                                    return false;
                                }
                              })) {
          return _.diag(SPV_ERROR_INVALID_DATA, inst)
                 << "Tessellation execution model entry points can specify at "
                    "most one of VertexOrderCw or VertexOrderCcw execution "
                    "modes.";
        }
        break;
      case spv::ExecutionModel::Geometry:
        if (!execution_modes ||
            1 != std::count_if(
                     execution_modes->begin(), execution_modes->end(),
                     [](const spv::ExecutionMode& mode) {
                       switch (mode) {
                         case spv::ExecutionMode::InputPoints:
                         case spv::ExecutionMode::InputLines:
                         case spv::ExecutionMode::InputLinesAdjacency:
                         case spv::ExecutionMode::Triangles:
                         case spv::ExecutionMode::InputTrianglesAdjacency:
                           return true;
                         default:
                           return false;
                       }
                     })) {
          return _.diag(SPV_ERROR_INVALID_DATA, inst)
                 << "Geometry execution model entry points must specify "
                    "exactly one of InputPoints, InputLines, "
                    "InputLinesAdjacency, Triangles or InputTrianglesAdjacency "
                    "execution modes.";
        }
        if (!execution_modes ||
            1 != std::count_if(execution_modes->begin(), execution_modes->end(),
                               [](const spv::ExecutionMode& mode) {
                                 switch (mode) {
                                   case spv::ExecutionMode::OutputPoints:
                                   case spv::ExecutionMode::OutputLineStrip:
                                   case spv::ExecutionMode::OutputTriangleStrip:
                                     return true;
                                   default:
                                     return false;
                                 }
                               })) {
          return _.diag(SPV_ERROR_INVALID_DATA, inst)
                 << "Geometry execution model entry points must specify "
                    "exactly one of OutputPoints, OutputLineStrip or "
                    "OutputTriangleStrip execution modes.";
        }
        break;
      case spv::ExecutionModel::MeshEXT:
        if (!execution_modes ||
            1 != std::count_if(execution_modes->begin(), execution_modes->end(),
                               [](const spv::ExecutionMode& mode) {
                                 switch (mode) {
                                   case spv::ExecutionMode::OutputPoints:
                                   case spv::ExecutionMode::OutputLinesEXT:
                                   case spv::ExecutionMode::OutputTrianglesEXT:
                                     return true;
                                   default:
                                     return false;
                                 }
                               })) {
          return _.diag(SPV_ERROR_INVALID_DATA, inst)
                 << "MeshEXT execution model entry points must specify exactly "
                    "one of OutputPoints, OutputLinesEXT, or "
                    "OutputTrianglesEXT Execution Modes.";
        } else if (2 != std::count_if(
                            execution_modes->begin(), execution_modes->end(),
                            [](const spv::ExecutionMode& mode) {
                              switch (mode) {
                                case spv::ExecutionMode::OutputPrimitivesEXT:
                                case spv::ExecutionMode::OutputVertices:
                                  return true;
                                default:
                                  return false;
                              }
                            })) {
          return _.diag(SPV_ERROR_INVALID_DATA, inst)
                 << "MeshEXT execution model entry points must specify both "
                    "OutputPrimitivesEXT and OutputVertices Execution Modes.";
        }
        break;
      default:
        break;
    }
  }

  if (spvIsVulkanEnv(_.context()->target_env)) {
    switch (execution_model) {
      case spv::ExecutionModel::GLCompute:
        if (!execution_modes ||
            !execution_modes->count(spv::ExecutionMode::LocalSize)) {
          bool ok = false;
          for (auto& i : _.ordered_instructions()) {
            if (i.opcode() == spv::Op::OpDecorate) {
              if (i.operands().size() > 2) {
                if (i.GetOperandAs<spv::Decoration>(1) ==
                        spv::Decoration::BuiltIn &&
                    i.GetOperandAs<spv::BuiltIn>(2) ==
                        spv::BuiltIn::WorkgroupSize) {
                  ok = true;
                  break;
                }
              }
            }
            if (i.opcode() == spv::Op::OpExecutionModeId) {
              const auto mode = i.GetOperandAs<spv::ExecutionMode>(1);
              if (mode == spv::ExecutionMode::LocalSizeId) {
                ok = true;
                break;
              }
            }
          }
          if (!ok && _.HasCapability(spv::Capability::TileShadingQCOM)) {
            ok =
                execution_modes &&
                execution_modes->count(spv::ExecutionMode::TileShadingRateQCOM);
          }
          if (!ok) {
            return _.diag(SPV_ERROR_INVALID_DATA, inst)
                   << (_.HasCapability(spv::Capability::TileShadingQCOM)
                           ? _.VkErrorID(10685)
                           : _.VkErrorID(6426))
                   << "In the Vulkan environment, GLCompute execution model "
                      "entry points require either the "
                   << (_.HasCapability(spv::Capability::TileShadingQCOM)
                           ? "TileShadingRateQCOM, "
                           : "")
                   << "LocalSize or LocalSizeId execution mode or an object "
                      "decorated with WorkgroupSize must be specified.";
          }
        }

        if (_.HasCapability(spv::Capability::TileShadingQCOM)) {
          if (execution_modes) {
            if (execution_modes->count(
                    spv::ExecutionMode::TileShadingRateQCOM) &&
                (execution_modes->count(spv::ExecutionMode::LocalSize) ||
                 execution_modes->count(spv::ExecutionMode::LocalSizeId))) {
              return _.diag(SPV_ERROR_INVALID_DATA, inst)
                     << "If the TileShadingRateQCOM execution mode is used, "
                     << "LocalSize and LocalSizeId must not be specified.";
            }
            if (execution_modes->count(
                    spv::ExecutionMode::NonCoherentTileAttachmentReadQCOM)) {
              return _.diag(SPV_ERROR_INVALID_DATA, inst)
                     << "The NonCoherentTileAttachmentQCOM execution mode must "
                        "not be used in any stage other than fragment.";
            }
          }
        } else {
          if (execution_modes &&
              execution_modes->count(spv::ExecutionMode::TileShadingRateQCOM)) {
            return _.diag(SPV_ERROR_INVALID_DATA, inst)
                   << "If the TileShadingRateQCOM execution mode is used, the "
                      "TileShadingQCOM capability must be enabled.";
          }
        }
        break;
      default:
        if (execution_modes &&
            execution_modes->count(spv::ExecutionMode::TileShadingRateQCOM)) {
          return _.diag(SPV_ERROR_INVALID_DATA, inst)
                 << "The TileShadingRateQCOM execution mode must not be used "
                    "in any stage other than compute.";
        }
        if (execution_model != spv::ExecutionModel::Fragment) {
          if (execution_modes &&
              execution_modes->count(
                  spv::ExecutionMode::NonCoherentTileAttachmentReadQCOM)) {
            return _.diag(SPV_ERROR_INVALID_DATA, inst)
                   << "The NonCoherentTileAttachmentQCOM execution mode must "
                      "not be used in any stage other than fragment.";
          }
          if (_.HasCapability(spv::Capability::TileShadingQCOM)) {
            return _.diag(SPV_ERROR_INVALID_CAPABILITY, inst)
                   << "The TileShadingQCOM capability must not be enabled in "
                      "any stage other than compute or fragment.";
          }
        } else {
          if (execution_modes &&
              execution_modes->count(
                  spv::ExecutionMode::NonCoherentTileAttachmentReadQCOM)) {
            if (!_.HasCapability(spv::Capability::TileShadingQCOM)) {
              return _.diag(SPV_ERROR_INVALID_DATA, inst)
                     << "If the NonCoherentTileAttachmentReadQCOM execution "
                        "mode is used, the TileShadingQCOM capability must be "
                        "enabled.";
            }
          }
        }
        break;
    }
  }

  if (_.EntryPointHasLocalSizeOrId(entry_point_id)) {
    const Instruction* local_size_inst =
        _.EntryPointLocalSizeOrId(entry_point_id);
    if (local_size_inst) {
      const auto mode = local_size_inst->GetOperandAs<spv::ExecutionMode>(1);
      const uint32_t operand_x = local_size_inst->GetOperandAs<uint32_t>(2);
      const uint32_t operand_y = local_size_inst->GetOperandAs<uint32_t>(3);
      const uint32_t operand_z = local_size_inst->GetOperandAs<uint32_t>(4);
      if (mode == spv::ExecutionMode::LocalSize) {
        if ((operand_x * operand_y * operand_z) == 0) {
          return _.diag(SPV_ERROR_INVALID_DATA, local_size_inst)
                 << "Local Size execution mode must not have a product of zero "
                    "(X "
                    "= "
                 << operand_x << ", Y = " << operand_y << ", Z = " << operand_z
                 << ").";
        }
      } else if (mode == spv::ExecutionMode::LocalSizeId) {
        // can only validate product if static and not spec constant
        // (This is done for us in EvalConstantValUint64)
        uint64_t x_size, y_size, z_size;
        bool static_x = _.EvalConstantValUint64(operand_x, &x_size);
        bool static_y = _.EvalConstantValUint64(operand_y, &y_size);
        bool static_z = _.EvalConstantValUint64(operand_z, &z_size);
        if (static_x && static_y && static_z &&
            ((x_size * y_size * z_size) == 0)) {
          return _.diag(SPV_ERROR_INVALID_DATA, local_size_inst)
                 << "Local Size Id execution mode must not have a product of "
                    "zero "
                    "(X = "
                 << x_size << ", Y = " << y_size << ", Z = " << z_size << ").";
        }
      }
    }
  }

  return SPV_SUCCESS;
}

spv_result_t ValidateExecutionMode(ValidationState_t& _,
                                   const Instruction* inst) {
  const auto entry_point_id = inst->GetOperandAs<uint32_t>(0);
  const auto found = std::find(_.entry_points().cbegin(),
                               _.entry_points().cend(), entry_point_id);
  if (found == _.entry_points().cend()) {
    return _.diag(SPV_ERROR_INVALID_ID, inst)
           << "OpExecutionMode Entry Point <id> " << _.getIdName(entry_point_id)
           << " is not the Entry Point "
              "operand of an OpEntryPoint.";
  }

  const auto mode = inst->GetOperandAs<spv::ExecutionMode>(1);
  if (inst->opcode() == spv::Op::OpExecutionModeId) {
    bool valid_mode = false;
    switch (mode) {
      case spv::ExecutionMode::SubgroupsPerWorkgroupId:
      case spv::ExecutionMode::LocalSizeHintId:
      case spv::ExecutionMode::LocalSizeId:
      case spv::ExecutionMode::FPFastMathDefault:
      case spv::ExecutionMode::MaximumRegistersIdINTEL:
      case spv::ExecutionMode::IsApiEntryAMDX:
      case spv::ExecutionMode::MaxNodeRecursionAMDX:
      case spv::ExecutionMode::MaxNumWorkgroupsAMDX:
      case spv::ExecutionMode::ShaderIndexAMDX:
      case spv::ExecutionMode::SharesInputWithAMDX:
      case spv::ExecutionMode::StaticNumWorkgroupsAMDX:
        valid_mode = true;
        break;
      default:
        valid_mode = false;
        break;
    }
    if (!valid_mode) {
      return _.diag(SPV_ERROR_INVALID_ID, inst)
             << "OpExecutionModeId is only valid when the Mode operand is an "
                "execution mode that takes Extra Operands that are id "
                "operands.";
    }

    size_t operand_count = inst->operands().size();
    for (size_t i = 2; i < operand_count; ++i) {
      const auto operand_id = inst->GetOperandAs<uint32_t>(i);
      const auto* operand_inst = _.FindDef(operand_id);
      switch (mode) {
        case spv::ExecutionMode::SubgroupsPerWorkgroupId:
        case spv::ExecutionMode::LocalSizeHintId:
        case spv::ExecutionMode::LocalSizeId:
        case spv::ExecutionMode::IsApiEntryAMDX:
        case spv::ExecutionMode::MaxNodeRecursionAMDX:
        case spv::ExecutionMode::MaxNumWorkgroupsAMDX:
        case spv::ExecutionMode::ShaderIndexAMDX:
        case spv::ExecutionMode::SharesInputWithAMDX:
        case spv::ExecutionMode::StaticNumWorkgroupsAMDX:
          if (!spvOpcodeIsConstant(operand_inst->opcode())) {
            return _.diag(SPV_ERROR_INVALID_ID, inst)
                   << "For OpExecutionModeId all Extra Operand ids must be "
                      "constant instructions.";
          }
          break;
        case spv::ExecutionMode::FPFastMathDefault:
          if (i == 2) {
            if (!_.IsFloatScalarType(operand_id)) {
              return _.diag(SPV_ERROR_INVALID_ID, inst)
                     << "The Target Type operand must be a floating-point "
                        "scalar type";
            }
          } else {
            bool is_int32 = false;
            bool is_const = false;
            uint32_t value = 0;
            std::tie(is_int32, is_const, value) =
                _.EvalInt32IfConst(operand_id);
            if (is_int32 && is_const) {
              // Valid values include up to 0x00040000 (AllowTransform).
              uint32_t invalid_mask = 0xfff80000;
              if ((invalid_mask & value) != 0) {
                return _.diag(SPV_ERROR_INVALID_ID, inst)
                       << "The Fast Math Default operand is an invalid bitmask "
                          "value";
              }
              if (value &
                  static_cast<uint32_t>(spv::FPFastMathModeMask::Fast)) {
                return _.diag(SPV_ERROR_INVALID_ID, inst)
                       << "The Fast Math Default operand must not include Fast";
              }
              const auto reassoc_contract =
                  spv::FPFastMathModeMask::AllowContract |
                  spv::FPFastMathModeMask::AllowReassoc;
              if ((value & static_cast<uint32_t>(
                               spv::FPFastMathModeMask::AllowTransform)) != 0 &&
                  ((value & static_cast<uint32_t>(reassoc_contract)) !=
                   static_cast<uint32_t>(reassoc_contract))) {
                return _.diag(SPV_ERROR_INVALID_ID, inst)
                       << "The Fast Math Default operand must include "
                          "AllowContract and AllowReassoc when AllowTransform "
                          "is specified";
              }
            } else {
              return _.diag(SPV_ERROR_INVALID_ID, inst)
                     << "The Fast Math Default operand must be a "
                        "non-specialization constant";
            }
          }
          break;
        default:
          break;
      }
    }
  } else if (mode == spv::ExecutionMode::SubgroupsPerWorkgroupId ||
             mode == spv::ExecutionMode::LocalSizeHintId ||
             mode == spv::ExecutionMode::LocalSizeId ||
             mode == spv::ExecutionMode::FPFastMathDefault ||
             mode == spv::ExecutionMode::IsApiEntryAMDX ||
             mode == spv::ExecutionMode::MaxNodeRecursionAMDX ||
             mode == spv::ExecutionMode::MaxNumWorkgroupsAMDX ||
             mode == spv::ExecutionMode::ShaderIndexAMDX ||
             mode == spv::ExecutionMode::SharesInputWithAMDX ||
             mode == spv::ExecutionMode::StaticNumWorkgroupsAMDX) {
    return _.diag(SPV_ERROR_INVALID_DATA, inst)
           << "OpExecutionMode is only valid when the Mode operand is an "
              "execution mode that takes no Extra Operands, or takes Extra "
              "Operands that are not id operands.";
  }

  const bool is_vulkan_env = (spvIsVulkanEnv(_.context()->target_env));
  const auto* models = _.GetExecutionModels(entry_point_id);
  switch (mode) {
    case spv::ExecutionMode::Invocations:
    case spv::ExecutionMode::InputPoints:
    case spv::ExecutionMode::InputLines:
    case spv::ExecutionMode::InputLinesAdjacency:
    case spv::ExecutionMode::InputTrianglesAdjacency:
    case spv::ExecutionMode::OutputLineStrip:
    case spv::ExecutionMode::OutputTriangleStrip:
      if (!std::all_of(models->begin(), models->end(),
                       [](const spv::ExecutionModel& model) {
                         return model == spv::ExecutionModel::Geometry;
                       })) {
        return _.diag(SPV_ERROR_INVALID_DATA, inst)
               << "Execution mode can only be used with the Geometry execution "
                  "model.";
      }
      break;
    case spv::ExecutionMode::OutputPoints:
      if (!std::all_of(
              models->begin(), models->end(),
              [&_](const spv::ExecutionModel& model) {
                switch (model) {
                  case spv::ExecutionModel::Geometry:
                    return true;
                  case spv::ExecutionModel::MeshNV:
                    return _.HasCapability(spv::Capability::MeshShadingNV);
                  case spv::ExecutionModel::MeshEXT:
                    return _.HasCapability(spv::Capability::MeshShadingEXT);
                  default:
                    return false;
                }
              })) {
        if (_.HasCapability(spv::Capability::MeshShadingNV) ||
            _.HasCapability(spv::Capability::MeshShadingEXT)) {
          return _.diag(SPV_ERROR_INVALID_DATA, inst)
                 << "Execution mode can only be used with the Geometry "
                    "MeshNV or MeshEXT execution model.";
        } else {
          return _.diag(SPV_ERROR_INVALID_DATA, inst)
                 << "Execution mode can only be used with the Geometry "
                    "execution "
                    "model.";
        }
      }
      break;
    case spv::ExecutionMode::SpacingEqual:
    case spv::ExecutionMode::SpacingFractionalEven:
    case spv::ExecutionMode::SpacingFractionalOdd:
    case spv::ExecutionMode::VertexOrderCw:
    case spv::ExecutionMode::VertexOrderCcw:
    case spv::ExecutionMode::PointMode:
    case spv::ExecutionMode::Quads:
    case spv::ExecutionMode::Isolines:
      if (!std::all_of(
              models->begin(), models->end(),
              [](const spv::ExecutionModel& model) {
                return (model == spv::ExecutionModel::TessellationControl) ||
                       (model == spv::ExecutionModel::TessellationEvaluation);
              })) {
        return _.diag(SPV_ERROR_INVALID_DATA, inst)
               << "Execution mode can only be used with a tessellation "
                  "execution model.";
      }
      break;
    case spv::ExecutionMode::Triangles:
      if (!std::all_of(models->begin(), models->end(),
                       [](const spv::ExecutionModel& model) {
                         switch (model) {
                           case spv::ExecutionModel::Geometry:
                           case spv::ExecutionModel::TessellationControl:
                           case spv::ExecutionModel::TessellationEvaluation:
                             return true;
                           default:
                             return false;
                         }
                       })) {
        return _.diag(SPV_ERROR_INVALID_DATA, inst)
               << "Execution mode can only be used with a Geometry or "
                  "tessellation execution model.";
      }
      break;
    case spv::ExecutionMode::OutputVertices:
      if (!std::all_of(
              models->begin(), models->end(),
              [&_](const spv::ExecutionModel& model) {
                switch (model) {
                  case spv::ExecutionModel::Geometry:
                  case spv::ExecutionModel::TessellationControl:
                  case spv::ExecutionModel::TessellationEvaluation:
                    return true;
                  case spv::ExecutionModel::MeshNV:
                    return _.HasCapability(spv::Capability::MeshShadingNV);
                  case spv::ExecutionModel::MeshEXT:
                    return _.HasCapability(spv::Capability::MeshShadingEXT);
                  default:
                    return false;
                }
              })) {
        if (_.HasCapability(spv::Capability::MeshShadingNV) ||
            _.HasCapability(spv::Capability::MeshShadingEXT)) {
          return _.diag(SPV_ERROR_INVALID_DATA, inst)
                 << "Execution mode can only be used with a Geometry, "
                    "tessellation, MeshNV or MeshEXT execution model.";
        } else {
          return _.diag(SPV_ERROR_INVALID_DATA, inst)
                 << "Execution mode can only be used with a Geometry or "
                    "tessellation execution model.";
        }
      }
      if (is_vulkan_env) {
        if (_.HasCapability(spv::Capability::MeshShadingEXT) &&
            inst->GetOperandAs<uint32_t>(2) == 0) {
          return _.diag(SPV_ERROR_INVALID_DATA, inst)
                 << _.VkErrorID(7330)
                 << "In mesh shaders using the MeshEXT Execution Model the "
                    "OutputVertices Execution Mode must be greater than 0";
        }
      }
      break;
    case spv::ExecutionMode::OutputLinesEXT:
    case spv::ExecutionMode::OutputTrianglesEXT:
    case spv::ExecutionMode::OutputPrimitivesEXT:
      if (!std::all_of(models->begin(), models->end(),
                       [](const spv::ExecutionModel& model) {
                         return (model == spv::ExecutionModel::MeshEXT ||
                                 model == spv::ExecutionModel::MeshNV);
                       })) {
        return _.diag(SPV_ERROR_INVALID_DATA, inst)
               << "Execution mode can only be used with the MeshEXT or MeshNV "
                  "execution "
                  "model.";
      }
      if (mode == spv::ExecutionMode::OutputPrimitivesEXT && is_vulkan_env) {
        if (_.HasCapability(spv::Capability::MeshShadingEXT) &&
            inst->GetOperandAs<uint32_t>(2) == 0) {
          return _.diag(SPV_ERROR_INVALID_DATA, inst)
                 << _.VkErrorID(7331)
                 << "In mesh shaders using the MeshEXT Execution Model the "
                    "OutputPrimitivesEXT Execution Mode must be greater than 0";
        }
      }
      break;
    case spv::ExecutionMode::QuadDerivativesKHR:
      if (!std::all_of(models->begin(), models->end(),
                       [](const spv::ExecutionModel& model) {
                         return (model == spv::ExecutionModel::Fragment ||
                                 model == spv::ExecutionModel::GLCompute);
                       })) {
        return _.diag(SPV_ERROR_INVALID_DATA, inst)
               << "Execution mode can only be used with the Fragment or "
                  "GLCompute execution model.";
      }
      break;
    case spv::ExecutionMode::PixelCenterInteger:
    case spv::ExecutionMode::OriginUpperLeft:
    case spv::ExecutionMode::OriginLowerLeft:
    case spv::ExecutionMode::EarlyFragmentTests:
    case spv::ExecutionMode::DepthReplacing:
    case spv::ExecutionMode::DepthGreater:
    case spv::ExecutionMode::DepthLess:
    case spv::ExecutionMode::DepthUnchanged:
    case spv::ExecutionMode::NonCoherentColorAttachmentReadEXT:
    case spv::ExecutionMode::NonCoherentDepthAttachmentReadEXT:
    case spv::ExecutionMode::NonCoherentStencilAttachmentReadEXT:
    case spv::ExecutionMode::PixelInterlockOrderedEXT:
    case spv::ExecutionMode::PixelInterlockUnorderedEXT:
    case spv::ExecutionMode::SampleInterlockOrderedEXT:
    case spv::ExecutionMode::SampleInterlockUnorderedEXT:
    case spv::ExecutionMode::ShadingRateInterlockOrderedEXT:
    case spv::ExecutionMode::ShadingRateInterlockUnorderedEXT:
    case spv::ExecutionMode::EarlyAndLateFragmentTestsAMD:
    case spv::ExecutionMode::StencilRefUnchangedFrontAMD:
    case spv::ExecutionMode::StencilRefGreaterFrontAMD:
    case spv::ExecutionMode::StencilRefLessFrontAMD:
    case spv::ExecutionMode::StencilRefUnchangedBackAMD:
    case spv::ExecutionMode::StencilRefGreaterBackAMD:
    case spv::ExecutionMode::StencilRefLessBackAMD:
    case spv::ExecutionMode::RequireFullQuadsKHR:
      if (!std::all_of(models->begin(), models->end(),
                       [](const spv::ExecutionModel& model) {
                         return model == spv::ExecutionModel::Fragment;
                       })) {
        return _.diag(SPV_ERROR_INVALID_DATA, inst)
               << "Execution mode can only be used with the Fragment execution "
                  "model.";
      }
      break;
    case spv::ExecutionMode::LocalSizeHint:
    case spv::ExecutionMode::VecTypeHint:
    case spv::ExecutionMode::ContractionOff:
    case spv::ExecutionMode::LocalSizeHintId:
      if (!std::all_of(models->begin(), models->end(),
                       [](const spv::ExecutionModel& model) {
                         return model == spv::ExecutionModel::Kernel;
                       })) {
        return _.diag(SPV_ERROR_INVALID_DATA, inst)
               << "Execution mode can only be used with the Kernel execution "
                  "model.";
      }
      break;
    case spv::ExecutionMode::LocalSize:
    case spv::ExecutionMode::LocalSizeId:
      if (mode == spv::ExecutionMode::LocalSizeId &&
          !_.IsLocalSizeIdAllowed()) {
        return _.diag(SPV_ERROR_INVALID_DATA, inst)
               << "LocalSizeId mode is not allowed by the current environment."
               << (is_vulkan_env
                       ? _.MissingFeature("maintenance4 feature",
                                          "--allow-localsizeid", false)
                       : "");
      }

      if (!std::all_of(
              models->begin(), models->end(),
              [&_](const spv::ExecutionModel& model) {
                switch (model) {
                  case spv::ExecutionModel::Kernel:
                  case spv::ExecutionModel::GLCompute:
                    return true;
                  case spv::ExecutionModel::TaskNV:
                  case spv::ExecutionModel::MeshNV:
                    return _.HasCapability(spv::Capability::MeshShadingNV);
                  case spv::ExecutionModel::TaskEXT:
                  case spv::ExecutionModel::MeshEXT:
                    return _.HasCapability(spv::Capability::MeshShadingEXT);
                  default:
                    return false;
                }
              })) {
        if (_.HasCapability(spv::Capability::MeshShadingNV) ||
            _.HasCapability(spv::Capability::MeshShadingEXT)) {
          return _.diag(SPV_ERROR_INVALID_DATA, inst)
                 << "Execution mode can only be used with a Kernel, GLCompute, "
                    "MeshNV, MeshEXT, TaskNV or TaskEXT execution model.";
        } else {
          return _.diag(SPV_ERROR_INVALID_DATA, inst)
                 << "Execution mode can only be used with a Kernel or "
                    "GLCompute "
                    "execution model.";
        }
      }
    default:
      break;
  }

  if (mode == spv::ExecutionMode::FPFastMathDefault) {
    const auto* modes = _.GetExecutionModes(entry_point_id);
    if (modes && modes->count(spv::ExecutionMode::ContractionOff)) {
      return _.diag(SPV_ERROR_INVALID_DATA, inst)
             << "FPFastMathDefault and ContractionOff execution modes cannot "
                "be applied to the same entry point";
    }
    if (modes && modes->count(spv::ExecutionMode::SignedZeroInfNanPreserve)) {
      return _.diag(SPV_ERROR_INVALID_DATA, inst)
             << "FPFastMathDefault and SignedZeroInfNanPreserve execution "
                "modes cannot be applied to the same entry point";
    }
  }

  if (is_vulkan_env) {
    if (mode == spv::ExecutionMode::OriginLowerLeft) {
      return _.diag(SPV_ERROR_INVALID_DATA, inst)
             << _.VkErrorID(4653)
             << "In the Vulkan environment, the OriginLowerLeft execution mode "
                "must not be used.";
    }
    if (mode == spv::ExecutionMode::PixelCenterInteger) {
      return _.diag(SPV_ERROR_INVALID_DATA, inst)
             << _.VkErrorID(4654)
             << "In the Vulkan environment, the PixelCenterInteger execution "
                "mode must not be used.";
    }
    if (mode == spv::ExecutionMode::TileShadingRateQCOM) {
      const auto rateX = inst->GetOperandAs<int>(2);
      const auto rateY = inst->GetOperandAs<int>(3);
      if ((rateX & (rateX - 1)) != 0 || (rateY & (rateY - 1)) != 0)
        return _.diag(SPV_ERROR_INVALID_DATA, inst)
               << "The TileShadingRateQCOM execution mode's x and y values "
                  "must be powers of 2.";
    }
  }

  return SPV_SUCCESS;
}

spv_result_t ValidateMemoryModel(ValidationState_t& _,
                                 const Instruction* inst) {
  // Already produced an error if multiple memory model instructions are
  // present.
  if (_.memory_model() != spv::MemoryModel::VulkanKHR &&
      _.HasCapability(spv::Capability::VulkanMemoryModelKHR)) {
    return _.diag(SPV_ERROR_INVALID_DATA, inst)
           << "VulkanMemoryModelKHR capability must only be specified if "
              "the VulkanKHR memory model is used.";
  }

  if (spvIsOpenCLEnv(_.context()->target_env)) {
    if ((_.addressing_model() != spv::AddressingModel::Physical32) &&
        (_.addressing_model() != spv::AddressingModel::Physical64)) {
      return _.diag(SPV_ERROR_INVALID_DATA, inst)
             << "Addressing model must be Physical32 or Physical64 "
             << "in the OpenCL environment.";
    }
    if (_.memory_model() != spv::MemoryModel::OpenCL) {
      return _.diag(SPV_ERROR_INVALID_DATA, inst)
             << "Memory model must be OpenCL in the OpenCL environment.";
    }
  }

  if (spvIsVulkanEnv(_.context()->target_env)) {
    if ((_.addressing_model() != spv::AddressingModel::Logical) &&
        (_.addressing_model() !=
         spv::AddressingModel::PhysicalStorageBuffer64)) {
      return _.diag(SPV_ERROR_INVALID_DATA, inst)
             << _.VkErrorID(4635)
             << "Addressing model must be Logical or PhysicalStorageBuffer64 "
             << "in the Vulkan environment.";
    }
  }
  return SPV_SUCCESS;
}

bool PerEntryExecutionMode(spv::ExecutionMode mode) {
  switch (mode) {
    // These execution modes can be specified multiple times per entry point.
    case spv::ExecutionMode::DenormPreserve:
    case spv::ExecutionMode::DenormFlushToZero:
    case spv::ExecutionMode::SignedZeroInfNanPreserve:
    case spv::ExecutionMode::RoundingModeRTE:
    case spv::ExecutionMode::RoundingModeRTZ:
    case spv::ExecutionMode::FPFastMathDefault:
    case spv::ExecutionMode::RoundingModeRTPINTEL:
    case spv::ExecutionMode::RoundingModeRTNINTEL:
    case spv::ExecutionMode::FloatingPointModeALTINTEL:
    case spv::ExecutionMode::FloatingPointModeIEEEINTEL:
      return false;
    default:
      return true;
  }
}

spv_result_t ValidateCapability(ValidationState_t& _, const Instruction* inst) {
  auto cap = inst->GetOperandAs<spv::Capability>(0);
  if (cap == spv::Capability::CooperativeMatrixKHR) {
    if (_.HasCapability(spv::Capability::Shader) &&
        !_.HasCapability(spv::Capability::VulkanMemoryModel)) {
      return _.diag(SPV_ERROR_INVALID_CAPABILITY, inst)
             << "If the Shader and CooperativeMatrixKHR capabilities are "
                "declared, the VulkanMemoryModel capability must also be "
                "declared";
    }
  }
  return SPV_SUCCESS;
}

}  // namespace

spv_result_t ValidateFloatControls2(ValidationState_t& _) {
  std::unordered_set<uint32_t> fp_fast_math_default_entry_points;
  for (auto entry_point : _.entry_points()) {
    const auto* exec_modes = _.GetExecutionModes(entry_point);
    if (exec_modes &&
        exec_modes->count(spv::ExecutionMode::FPFastMathDefault)) {
      fp_fast_math_default_entry_points.insert(entry_point);
    }
  }

  std::vector<std::pair<const Instruction*, spv::Decoration>> worklist;
  for (const auto& inst : _.ordered_instructions()) {
    if (inst.opcode() != spv::Op::OpDecorate) {
      continue;
    }

    const auto decoration = inst.GetOperandAs<spv::Decoration>(1);
    const auto target_id = inst.GetOperandAs<uint32_t>(0);
    const auto target = _.FindDef(target_id);
    if (decoration == spv::Decoration::NoContraction) {
      worklist.push_back(std::make_pair(target, decoration));
    } else if (decoration == spv::Decoration::FPFastMathMode) {
      auto mask = inst.GetOperandAs<spv::FPFastMathModeMask>(2);
      if ((mask & spv::FPFastMathModeMask::Fast) !=
          spv::FPFastMathModeMask::MaskNone) {
        worklist.push_back(std::make_pair(target, decoration));
      }
    }
  }

  std::unordered_set<const Instruction*> visited;
  while (!worklist.empty()) {
    const auto inst = worklist.back().first;
    const auto decoration = worklist.back().second;
    worklist.pop_back();

    if (!visited.insert(inst).second) {
      continue;
    }

    const auto function = inst->function();
    if (function) {
      const auto& entry_points = _.FunctionEntryPoints(function->id());
      for (auto entry_point : entry_points) {
        if (fp_fast_math_default_entry_points.count(entry_point)) {
          const std::string dec = decoration == spv::Decoration::NoContraction
                                      ? "NoContraction"
                                      : "FPFastMathMode Fast";
          return _.diag(SPV_ERROR_INVALID_DATA, inst)
                 << dec
                 << " cannot be used by an entry point with the "
                    "FPFastMathDefault execution mode";
        }
      }
    } else {
      for (const auto& pair : inst->uses()) {
        worklist.push_back(std::make_pair(pair.first, decoration));
      }
    }
  }

  return SPV_SUCCESS;
}

spv_result_t ModeSettingPass(ValidationState_t& _, const Instruction* inst) {
  switch (inst->opcode()) {
    case spv::Op::OpEntryPoint:
      if (auto error = ValidateEntryPoint(_, inst)) return error;
      break;
    case spv::Op::OpExecutionMode:
    case spv::Op::OpExecutionModeId:
      if (auto error = ValidateExecutionMode(_, inst)) return error;
      break;
    case spv::Op::OpMemoryModel:
      if (auto error = ValidateMemoryModel(_, inst)) return error;
      break;
    case spv::Op::OpCapability:
      if (auto error = ValidateCapability(_, inst)) return error;
      break;
    default:
      break;
  }
  return SPV_SUCCESS;
}

spv_result_t ValidateDuplicateExecutionModes(ValidationState_t& _) {
  using PerEntryKey = std::tuple<spv::ExecutionMode, uint32_t>;
  using PerOperandKey = std::tuple<spv::ExecutionMode, uint32_t, uint32_t>;
  std::set<PerEntryKey> seen_per_entry;
  std::set<PerOperandKey> seen_per_operand;

  const auto lookupMode = [](spv::ExecutionMode mode) -> std::string {
    const spvtools::OperandDesc* desc = nullptr;
    if (spvtools::LookupOperand(SPV_OPERAND_TYPE_EXECUTION_MODE,
                                static_cast<uint32_t>(mode),
                                &desc) == SPV_SUCCESS) {
      return std::string(desc->name().data());
    }
    return "Unknown";
  };

  for (const auto& inst : _.ordered_instructions()) {
    if (inst.opcode() != spv::Op::OpExecutionMode &&
        inst.opcode() != spv::Op::OpExecutionModeId) {
      continue;
    }

    const auto entry = inst.GetOperandAs<uint32_t>(0);
    const auto mode = inst.GetOperandAs<spv::ExecutionMode>(1);
    if (PerEntryExecutionMode(mode)) {
      if (!seen_per_entry.insert(std::make_tuple(mode, entry)).second) {
        return _.diag(SPV_ERROR_INVALID_ID, &inst)
               << lookupMode(mode)
               << " execution mode must not be specified multiple times per "
                  "entry point";
      }
    } else {
      // Execution modes allowed multiple times all take a single operand.
      const auto operand = inst.GetOperandAs<uint32_t>(2);
      if (!seen_per_operand.insert(std::make_tuple(mode, entry, operand))
               .second) {
        return _.diag(SPV_ERROR_INVALID_ID, &inst)
               << lookupMode(mode)
               << " execution mode must not be specified multiple times for "
                  "the same entry point and operands";
      }
    }
  }

  return SPV_SUCCESS;
}

}  // namespace val
}  // namespace spvtools