.section .debug_line,"",@progbits
# Leading good section
.long   .Lunit1_end - .Lunit1_start # Length of Unit (DWARF-32 format)
.Lunit1_start:
.short  4               # DWARF version number
.long   .Lprologue1_end-.Lprologue1_start # Length of Prologue
.Lprologue1_start:
.byte   1               # Minimum Instruction Length
.byte   1               # Maximum Operations per Instruction
.byte   1               # Default is_stmt
.byte   -5              # Line Base
.byte   14              # Line Range
.byte   13              # Opcode Base
.byte   0, 1, 1, 1, 1, 0, 0, 0, 1, 0, 0, 1 # Standard Opcode Lengths
.asciz "dir1"           # Include table
.asciz "dir2"
.byte   0
.asciz "file1"          # File table
.byte   0, 0, 0
.asciz "file2"
.byte   1, 0, 0
.byte   0
.Lprologue1_end:
.byte   0, 9, 2         # DW_LNE_set_address
.quad   0x0badbeef
.byte   0, 1, 1         # DW_LNE_end_sequence
.Lunit1_end:

# version 0
.long   .Lunit_v0_end - .Lunit_v0_start # unit length
.Lunit_v0_start:
.short  0               # version
.Lunit_v0_end:

# version 1
.long   .Lunit_v1_end - .Lunit_v1_start # unit length
.Lunit_v1_start:
.short  1               # version
.Lunit_v1_end:

# version 5 malformed line/include table
.long   .Lunit_v5_end - .Lunit_v5_start # unit length
.Lunit_v5_start:
.short  5               # version
.byte   8               # address size
.byte   8               # segment selector
.long   .Lprologue_v5_end-.Lprologue_v5_start # Length of Prologue
.Lprologue_v5_start:
.byte   1               # Minimum Instruction Length
.byte   1               # Maximum Operations per Instruction
.byte   1               # Default is_stmt
.byte   -5              # Line Base
.byte   14              # Line Range
.byte   13              # Opcode Base
.byte   0, 1, 1, 1, 1, 0, 0, 0, 1, 0, 0, 1 # Standard Opcode Lengths
.byte   0               # directory table (invalid)
.Lprologue_v5_end:
.Lunit_v5_end:

# Short prologue
.long   .Lunit_short_prologue_end - .Lunit_short_prologue_start # unit length
.Lunit_short_prologue_start:
.short  4               # version
.long   .Lprologue_short_prologue_end-.Lprologue_short_prologue_start - 2 # Length of Prologue
.Lprologue_short_prologue_start:
.byte   1               # Minimum Instruction Length
.byte   1               # Maximum Operations per Instruction
.byte   1               # Default is_stmt
.byte   -5              # Line Base
.byte   14              # Line Range
.byte   13              # Opcode Base
.byte   0, 1, 1, 1, 1, 0, 0, 0, 1, 0, 0, 1 # Standard Opcode Lengths
.asciz "dir1"           # Include table
.asciz "dir2"
.byte   0
.asciz "file1"          # File table
.byte   0, 0, 0
.asciz "file2"
.byte   1, 0, 0
.byte   0
.Lprologue_short_prologue_end:
.Lunit_short_prologue_end:

# Over-long prologue
.long   .Lunit_long_prologue_end - .Lunit_long_prologue_start # unit length
.Lunit_long_prologue_start:
.short  4               # version
.long   .Lprologue_long_prologue_end-.Lprologue_long_prologue_start + 1 # Length of Prologue
.Lprologue_long_prologue_start:
.byte   1               # Minimum Instruction Length
.byte   1               # Maximum Operations per Instruction
.byte   1               # Default is_stmt
.byte   -5              # Line Base
.byte   14              # Line Range
.byte   13              # Opcode Base
.byte   0, 1, 1, 1, 1, 0, 0, 0, 1, 0, 0, 1 # Standard Opcode Lengths
.asciz "dir1"           # Include table
.asciz "dir2"
.byte   0
.asciz "file1"          # File table
.byte   0, 0, 0
.asciz "file2"
.byte   1, 0, 0
.byte   0
.Lprologue_long_prologue_end:
.Lunit_long_prologue_end:

# Over-long extended opcode
.long   .Lunit_long_opcode_end - .Lunit_long_opcode_start # unit length
.Lunit_long_opcode_start:
.short  4               # version
.long   .Lprologue_long_opcode_end-.Lprologue_long_opcode_start # Length of Prologue
.Lprologue_long_opcode_start:
.byte   1               # Minimum Instruction Length
.byte   1               # Maximum Operations per Instruction
.byte   1               # Default is_stmt
.byte   -5              # Line Base
.byte   14              # Line Range
.byte   13              # Opcode Base
.byte   0, 1, 1, 1, 1, 0, 0, 0, 1, 0, 0, 1 # Standard Opcode Lengths
.asciz "dir1"           # Include table
.asciz "dir2"
.byte   0
.asciz "file1"          # File table
.byte   0, 0, 0
.asciz "file2"
.byte   1, 0, 0
.byte   0
.Lprologue_long_opcode_end:
.byte   0, 9, 2        # DW_LNE_set_address
.quad   0xabbadaba
.byte   0, 2, 1         # DW_LNE_end_sequence (wrong length)
.byte   0, 9, 2        # DW_LNE_set_address
.quad   0xbabb1e45
.byte   0, 1, 1         # DW_LNE_end_sequence (wrong length)
.Lunit_long_opcode_end:

# No end of sequence
.long   .Lunit_no_eos_end - .Lunit_no_eos_start # unit length
.Lunit_no_eos_start:
.short  4               # version
.long   .Lprologue_no_eos_end-.Lprologue_no_eos_start # Length of Prologue
.Lprologue_no_eos_start:
.byte   1               # Minimum Instruction Length
.byte   1               # Maximum Operations per Instruction
.byte   1               # Default is_stmt
.byte   -5              # Line Base
.byte   14              # Line Range
.byte   13              # Opcode Base
.byte   0, 1, 1, 1, 1, 0, 0, 0, 1, 0, 0, 1 # Standard Opcode Lengths
.asciz "dir1"           # Include table
.asciz "dir2"
.byte   0
.asciz "file1"          # File table
.byte   0, 0, 0
.asciz "file2"
.byte   1, 0, 0
.byte   0
.Lprologue_no_eos_end:
.byte   0, 9, 2        # DW_LNE_set_address
.quad   0xdeadfade
.byte   1              # DW_LNS_copy
.Lunit_no_eos_end:

# Trailing good section
.long   .Lunit_good_end - .Lunit_good_start # Length of Unit (DWARF-32 format)
.Lunit_good_start:
.short  4               # DWARF version number
.long   .Lprologue_good_end-.Lprologue_good_start # Length of Prologue
.Lprologue_good_start:
.byte   1               # Minimum Instruction Length
.byte   1               # Maximum Operations per Instruction
.byte   1               # Default is_stmt
.byte   -5              # Line Base
.byte   14              # Line Range
.byte   13              # Opcode Base
.byte   0, 1, 1, 1, 1, 0, 0, 0, 1, 0, 0, 1 # Standard Opcode Lengths
.asciz "dir1"           # Include table
.asciz "dir2"
.byte   0
.asciz "file1"          # File table
.byte   0, 0, 0
.asciz "file2"
.byte   1, 0, 0
.byte   0
.Lprologue_good_end:
.byte   0, 9, 2         # DW_LNE_set_address
.quad   0xcafebabe
.byte   0, 1, 1         # DW_LNE_end_sequence
.Lunit_good_end: