# The following variables will likely need to be modified, depending on where
# and how you built LLVM & Clang. They can be overridden in a command-line
# invocation of make, like:
#
#   make LLVM_SRC_PATH=<path> LLVM_BIN_PATH=<path> \
#        LIBCXX_INSTALL_PATH=<path> CLANG_PATH=<path> \
#        BINUTILS_BIN_PATH=<path> ...
#

# LLVM_SRC_PATH is the path to the root of the checked out source code. This
# directory should contain the configure script, the include/ and lib/
# directories of LLVM, Clang in tools/clang/, etc.
# Alternatively, if you're building vs. a binary download of LLVM, then
# LLVM_SRC_PATH can point to the main untarred directory.
LLVM_SRC_PATH ?= ../llvm

# LLVM_BIN_PATH is the directory where binaries are placed by the LLVM build
# process. It should contain the tools like clang, clang-format, llc,
# llvm-as, llvm-config, llvm-mc, pnacl-bcdis, and pnacl-freeze.
# It also contains developer libraries like libLLVMSupport.a.
# The default reflects a configure + make build.
LLVM_BIN_PATH ?= $(shell readlink -e \
	../../out/llvm_x86_64_linux_work/Release+Asserts/bin)

# PNACL_TOOLCHAIN_ROOT is the location of the PNaCl toolchain.
# This is used as the default root for finding binutils, libcxx, etc.
PNACL_TOOLCHAIN_ROOT = $(shell readlink -e \
	../../../toolchain/linux_x86/pnacl_newlib)

# CLANG_PATH is the location of the clang compiler to use for building
# the host binaries.
CLANG_PATH ?= $(shell readlink -e \
	../../../../third_party/llvm-build/Release+Asserts/bin)

# LIBCXX_INSTALL_PATH is the directory where libc++ is located. It should
# contain header files and corresponding libraries. This is used for
# building the host binaries in conjuction with clang.
LIBCXX_INSTALL_PATH ?= $(PNACL_TOOLCHAIN_ROOT)

# The location of binutils tools (e.g., objdump) for testing.
BINUTILS_BIN_PATH ?= $(shell readlink -e $(PNACL_TOOLCHAIN_ROOT)/bin)

HOST_ARCH ?= x86_64
ifeq ($(HOST_ARCH),x86_64)
  HOST_FLAGS = -m64 -stdlib=libc++
else
  ifeq ($(HOST_ARCH),x86)
    HOST_FLAGS = -m32 -stdlib=libc++
  endif
endif

ifdef DEBUG
  OBJDIR = build/Debug
  OPTLEVEL = -O0
else
  OBJDIR = build/Release
  OPTLEVEL = -O2 -ffunction-sections -fdata-sections
endif

# The list of CXX defines that are dependent on build parameters.
CXX_DEFINES =
CXX_EXTRA =
LD_EXTRA =

ifdef MINIMAL
  NOASSERT = 1
  OBJDIR := $(OBJDIR)+Min
  CXX_DEFINES += -DALLOW_DUMP=0 -DALLOW_LLVM_CL=0 -DALLOW_LLVM_IR=0 \
	-DALLOW_LLVM_IR_AS_INPUT=0 -DALLOW_DISABLE_IR_GEN=0 \
        -DALLOW_MINIMAL_BUILD=1
else
  CXX_DEFINES += -DALLOW_DUMP=1 -DALLOW_LLVM_CL=1 -DALLOW_LLVM_IR=1 \
	-DALLOW_LLVM_IR_AS_INPUT=1 -DALLOW_DISABLE_IR_GEN=1 \
        -DALLOW_MINIMAL_BUILD=0
endif

ifdef NOASSERT
  ASSERTIONS = -DNDEBUG
else
  ASSERTIONS =
  OBJDIR := $(OBJDIR)+Asserts
endif

ifdef TSAN
  OBJDIR := $(OBJDIR)+TSan
  CXX_EXTRA += -fsanitize=thread
  LD_EXTRA += -fsanitize=thread
endif

$(info -----------------------------------------------)
$(info Using LLVM_SRC_PATH = $(LLVM_SRC_PATH))
$(info Using LLVM_BIN_PATH = $(LLVM_BIN_PATH))
$(info Using PNACL_TOOLCHAIN_ROOT = $(PNACL_TOOLCHAIN_ROOT))
$(info Using CLANG_PATH = $(CLANG_PATH))
$(info Using LIBCXX_INSTALL_PATH = $(LIBCXX_INSTALL_PATH))
$(info Using BINUTILS_BIN_PATH = $(BINUTILS_BIN_PATH))
$(info Using HOST_ARCH     = $(HOST_ARCH))
$(info -----------------------------------------------)

LLVM_CXXFLAGS := `$(LLVM_BIN_PATH)/llvm-config --cxxflags`
LLVM_LDFLAGS := `$(LLVM_BIN_PATH)/llvm-config --libs` \
                `$(LLVM_BIN_PATH)/llvm-config --ldflags` \
                `$(LLVM_BIN_PATH)/llvm-config --system-libs`

# It's recommended that CXX matches the compiler you used to build LLVM itself.
CCACHE := `command -v ccache`
CXX := CCACHE_CPP2=yes $(CCACHE) $(CLANG_PATH)/clang++

CXXFLAGS := $(LLVM_CXXFLAGS) -std=gnu++11 -Wall -Wextra -Werror -fno-rtti \
	-fno-exceptions $(OPTLEVEL) $(ASSERTIONS) $(CXX_DEFINES) -g \
	$(HOST_FLAGS) -pedantic -Wno-error=unused-parameter \
	-I$(LIBCXX_INSTALL_PATH)/include/c++/v1 $(CXX_EXTRA)
LDFLAGS := $(HOST_FLAGS) -L$(LIBCXX_INSTALL_PATH)/lib -Wl,--gc-sections \
	$(LD_EXTRA)

SRCS = \
	assembler.cpp \
	assembler_ia32.cpp \
	IceCfg.cpp \
	IceCfgNode.cpp \
	IceELFObjectWriter.cpp \
	IceELFSection.cpp \
	IceFixups.cpp \
	IceGlobalContext.cpp \
	IceGlobalInits.cpp \
	IceInst.cpp \
	IceInstX8632.cpp \
	IceIntrinsics.cpp \
	IceLiveness.cpp \
	IceOperand.cpp \
	IceRegAlloc.cpp \
	IceRNG.cpp \
	IceTargetLowering.cpp \
	IceTargetLoweringX8632.cpp \
	IceThreading.cpp \
	IceTimerTree.cpp \
	IceTranslator.cpp \
	IceTypes.cpp \
	main.cpp \
	PNaClTranslator.cpp

ifndef MINIMAL
  SRCS += IceConverter.cpp \
	IceTypeConverter.cpp
endif

OBJS=$(patsubst %.cpp, $(OBJDIR)/%.o, $(SRCS))

UNITTEST_SRCS = \
	BitcodeMunge.cpp \
	IceELFSectionTest.cpp \
	IceParseInstsTest.cpp

UNITTEST_OBJS = $(patsubst %.cpp, $(OBJDIR)/unittest/%.o, $(UNITTEST_SRCS))
UNITTEST_LIB_OBJS = $(filter-out $(OBJDIR)/main.o,$(OBJS))

# Keep all the first target so it's the default.
all: $(OBJDIR)/pnacl-sz make_symlink runtime

# Creates symbolic link so that testing is easier. Also runs
# pnacl-sz to verify that the defines flags have valid values,
# as well as describe the corresponding build attributes.
make_symlink: $(OBJDIR)/pnacl-sz
	rm -rf pnacl-sz
	ln -s $(OBJDIR)/pnacl-sz
	@echo "Build Attributes:"
	@$(OBJDIR)/pnacl-sz --build-atts

.PHONY: all make_symlink runtime bloat

$(OBJDIR)/pnacl-sz: $(OBJS)
	$(CXX) $(LDFLAGS) -o $@ $^ $(LLVM_LDFLAGS) \
               -Wl,-rpath=$(abspath $(LIBCXX_INSTALL_PATH)/lib)

# TODO(stichnot): Be more precise than "*.h" here and elsewhere.
$(OBJS): $(OBJDIR)/%.o: src/%.cpp src/*.h src/*.def
	$(CXX) -c $(CXXFLAGS) $< -o $@

$(OBJDIR)/run_unittests: $(UNITTEST_OBJS) $(UNITTEST_LIB_OBJS)
	$(CXX) $(LDFLAGS) -o $@ $^ $(LLVM_LDFLAGS) -lgtest -lgtest_main -ldl \
               -Wl,-rpath=$(abspath $(LIBCXX_INSTALL_PATH)/lib)

$(UNITTEST_OBJS): $(OBJDIR)/unittest/%.o: unittest/%.cpp \
		unittest/*.h src/*.h src/*.def
	$(CXX) -c $(CXXFLAGS) \
		-Isrc/ \
		-I$(LLVM_SRC_PATH)/utils/unittest/googletest/include \
		-DGTEST_HAS_RTTI=0 -DGTEST_USE_OWN_TR1_TUPLE \
		$< -o $@

$(OBJS): | $(OBJDIR)

$(UNITTEST_OBJS): | $(OBJDIR)/unittest

$(OBJDIR):
	@mkdir -p $@

$(OBJDIR)/unittest: $(OBJDIR)
	@mkdir -p $@

RT_SRC := runtime/szrt.c runtime/szrt_ll.ll
RT_OBJ := build/runtime/szrt_native_x8632.o build/runtime/szrt_sb_x8632.o

runtime: $(RT_OBJ)

# Use runtime.is.built so that build-runtime.py is invoked only once
# even in a parallel build.
.INTERMEDIATE: runtime.is.built
$(RT_OBJ): runtime.is.built
runtime.is.built: $(RT_SRC)
	@echo ================ Building Subzero runtime ================
	./pydir/build-runtime.py -v --pnacl-root $(PNACL_TOOLCHAIN_ROOT)

check-lit: $(OBJDIR)/pnacl-sz make_symlink
	LLVM_BIN_PATH=$(LLVM_BIN_PATH) \
	BINUTILS_BIN_PATH=$(BINUTILS_BIN_PATH) \
	$(LLVM_SRC_PATH)/utils/lit/lit.py -sv tests_lit

ifdef MINIMAL
check-xtest: $(OBJDIR)/pnacl-sz make_symlink runtime
	@echo "Crosstests disabled, minimal build"
else
check-xtest: $(OBJDIR)/pnacl-sz make_symlink runtime
       # Do all native/sse2 tests, but only test_vector_ops for native/sse4.1.
       # For (slow) sandboxed tests, limit to Om1/sse4.1.
	./pydir/crosstest_generator.py -v --lit \
	  -i native,sse2 -i native,sse4.1,test_vector_ops \
	  -i sandbox,sse4.1,Om1
	LLVM_BIN_PATH=$(LLVM_BIN_PATH) \
	$(LLVM_SRC_PATH)/utils/lit/lit.py -sv crosstest/Output
endif

check-unit: $(OBJDIR)/run_unittests
	$(OBJDIR)/run_unittests

check: check-lit check-unit check-xtest

FORMAT_BLACKLIST =
# Add one of the following lines for each source file to ignore.
FORMAT_BLACKLIST += ! -name IceParseInstsTest.cpp
format:
	$(LLVM_BIN_PATH)/clang-format -style=LLVM -i \
	`find . -regex '.*\.\(c\|h\|cpp\)' $(FORMAT_BLACKLIST)`

format-diff:
	git diff -U0 `git merge-base HEAD master` | \
	PATH=$(LLVM_BIN_PATH):$(PATH) \
	$(LLVM_SRC_PATH)/../clang/tools/clang-format/clang-format-diff.py \
	-p1 -style=LLVM -i

bloat: make_symlink
	nm -C -S -l pnacl-sz | \
	bloat/bloat.py --nm-output=/dev/stdin syms > build/pnacl-sz.bloat.json
	@echo See Subzero size breakdown in bloat/pnacl-sz.bloat.html

clean:
	rm -rf pnacl-sz *.o $(OBJDIR) build/pnacl-sz.bloat.json

clean-all: clean
	rm -rf build/