| // Copyright (c) 2018 Google LLC. |
| // Modifications Copyright (C) 2020 Advanced Micro Devices, Inc. All rights |
| // reserved. |
| // |
| // Licensed under the Apache License, Version 2.0 (the "License"); |
| // you may not use this file except in compliance with the License. |
| // You may obtain a copy of the License at |
| // |
| // http://www.apache.org/licenses/LICENSE-2.0 |
| // |
| // Unless required by applicable law or agreed to in writing, software |
| // distributed under the License is distributed on an "AS IS" BASIS, |
| // WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| // See the License for the specific language governing permissions and |
| // limitations under the License. |
| |
| // Validates correctness of built-in variables. |
| |
| #include <array> |
| #include <functional> |
| #include <list> |
| #include <map> |
| #include <set> |
| #include <sstream> |
| #include <stack> |
| #include <string> |
| #include <unordered_map> |
| #include <vector> |
| |
| #include "source/diagnostic.h" |
| #include "source/opcode.h" |
| #include "source/spirv_target_env.h" |
| #include "source/util/bitutils.h" |
| #include "source/val/instruction.h" |
| #include "source/val/validate.h" |
| #include "source/val/validation_state.h" |
| |
| namespace spvtools { |
| namespace val { |
| namespace { |
| |
| // Returns a short textual description of the id defined by the given |
| // instruction. |
| std::string GetIdDesc(const Instruction& inst) { |
| std::ostringstream ss; |
| ss << "ID <" << inst.id() << "> (Op" << spvOpcodeString(inst.opcode()) << ")"; |
| return ss.str(); |
| } |
| |
| // Gets underlying data type which is |
| // - member type if instruction is OpTypeStruct |
| // (member index is taken from decoration). |
| // - data type if id creates a pointer. |
| // - type of the constant if instruction is OpConst or OpSpecConst. |
| // |
| // Fails in any other case. The function is based on built-ins allowed by |
| // the Vulkan spec. |
| // TODO: If non-Vulkan validation rules are added then it might need |
| // to be refactored. |
| spv_result_t GetUnderlyingType(ValidationState_t& _, |
| const Decoration& decoration, |
| const Instruction& inst, |
| uint32_t* underlying_type) { |
| if (decoration.struct_member_index() != Decoration::kInvalidMember) { |
| if (inst.opcode() != spv::Op::OpTypeStruct) { |
| return _.diag(SPV_ERROR_INVALID_DATA, &inst) |
| << GetIdDesc(inst) |
| << "Attempted to get underlying data type via member index for " |
| "non-struct type."; |
| } |
| *underlying_type = inst.word(decoration.struct_member_index() + 2); |
| return SPV_SUCCESS; |
| } |
| |
| if (inst.opcode() == spv::Op::OpTypeStruct) { |
| return _.diag(SPV_ERROR_INVALID_DATA, &inst) |
| << GetIdDesc(inst) |
| << " did not find an member index to get underlying data type for " |
| "struct type."; |
| } |
| |
| if (spvOpcodeIsConstant(inst.opcode())) { |
| *underlying_type = inst.type_id(); |
| return SPV_SUCCESS; |
| } |
| |
| spv::StorageClass storage_class; |
| if (!_.GetPointerTypeInfo(inst.type_id(), underlying_type, &storage_class)) { |
| return _.diag(SPV_ERROR_INVALID_DATA, &inst) |
| << GetIdDesc(inst) |
| << " is decorated with BuiltIn. BuiltIn decoration should only be " |
| "applied to struct types, variables and constants."; |
| } |
| return SPV_SUCCESS; |
| } |
| |
| // Returns Storage Class used by the instruction if applicable. |
| // Returns spv::StorageClass::Max if not. |
| spv::StorageClass GetStorageClass(const Instruction& inst) { |
| switch (inst.opcode()) { |
| case spv::Op::OpTypePointer: |
| case spv::Op::OpTypeForwardPointer: { |
| return spv::StorageClass(inst.word(2)); |
| } |
| case spv::Op::OpVariable: { |
| return spv::StorageClass(inst.word(3)); |
| } |
| case spv::Op::OpGenericCastToPtrExplicit: { |
| return spv::StorageClass(inst.word(4)); |
| } |
| default: { break; } |
| } |
| return spv::StorageClass::Max; |
| } |
| |
| typedef enum VUIDError_ { |
| VUIDErrorExecutionModel = 0, |
| VUIDErrorStorageClass = 1, |
| VUIDErrorType = 2, |
| VUIDErrorMax, |
| } VUIDError; |
| |
| const static uint32_t NumVUIDBuiltins = 36; |
| |
| typedef struct { |
| spv::BuiltIn builtIn; |
| uint32_t vuid[VUIDErrorMax]; // execution mode, storage class, type VUIDs |
| } BuiltinVUIDMapping; |
| |
| std::array<BuiltinVUIDMapping, NumVUIDBuiltins> builtinVUIDInfo = {{ |
| // clang-format off |
| {spv::BuiltIn::SubgroupEqMask, {0, 4370, 4371}}, |
| {spv::BuiltIn::SubgroupGeMask, {0, 4372, 4373}}, |
| {spv::BuiltIn::SubgroupGtMask, {0, 4374, 4375}}, |
| {spv::BuiltIn::SubgroupLeMask, {0, 4376, 4377}}, |
| {spv::BuiltIn::SubgroupLtMask, {0, 4378, 4379}}, |
| {spv::BuiltIn::SubgroupLocalInvocationId, {0, 4380, 4381}}, |
| {spv::BuiltIn::SubgroupSize, {0, 4382, 4383}}, |
| {spv::BuiltIn::GlobalInvocationId, {4236, 4237, 4238}}, |
| {spv::BuiltIn::LocalInvocationId, {4281, 4282, 4283}}, |
| {spv::BuiltIn::NumWorkgroups, {4296, 4297, 4298}}, |
| {spv::BuiltIn::NumSubgroups, {4293, 4294, 4295}}, |
| {spv::BuiltIn::SubgroupId, {4367, 4368, 4369}}, |
| {spv::BuiltIn::WorkgroupId, {4422, 4423, 4424}}, |
| {spv::BuiltIn::HitKindKHR, {4242, 4243, 4244}}, |
| {spv::BuiltIn::HitTNV, {4245, 4246, 4247}}, |
| {spv::BuiltIn::InstanceCustomIndexKHR, {4251, 4252, 4253}}, |
| {spv::BuiltIn::InstanceId, {4254, 4255, 4256}}, |
| {spv::BuiltIn::RayGeometryIndexKHR, {4345, 4346, 4347}}, |
| {spv::BuiltIn::ObjectRayDirectionKHR, {4299, 4300, 4301}}, |
| {spv::BuiltIn::ObjectRayOriginKHR, {4302, 4303, 4304}}, |
| {spv::BuiltIn::ObjectToWorldKHR, {4305, 4306, 4307}}, |
| {spv::BuiltIn::WorldToObjectKHR, {4434, 4435, 4436}}, |
| {spv::BuiltIn::IncomingRayFlagsKHR, {4248, 4249, 4250}}, |
| {spv::BuiltIn::RayTminKHR, {4351, 4352, 4353}}, |
| {spv::BuiltIn::RayTmaxKHR, {4348, 4349, 4350}}, |
| {spv::BuiltIn::WorldRayDirectionKHR, {4428, 4429, 4430}}, |
| {spv::BuiltIn::WorldRayOriginKHR, {4431, 4432, 4433}}, |
| {spv::BuiltIn::LaunchIdKHR, {4266, 4267, 4268}}, |
| {spv::BuiltIn::LaunchSizeKHR, {4269, 4270, 4271}}, |
| {spv::BuiltIn::FragInvocationCountEXT, {4217, 4218, 4219}}, |
| {spv::BuiltIn::FragSizeEXT, {4220, 4221, 4222}}, |
| {spv::BuiltIn::FragStencilRefEXT, {4223, 4224, 4225}}, |
| {spv::BuiltIn::FullyCoveredEXT, {4232, 4233, 4234}}, |
| {spv::BuiltIn::CullMaskKHR, {6735, 6736, 6737}}, |
| {spv::BuiltIn::BaryCoordKHR, {4154, 4155, 4156}}, |
| {spv::BuiltIn::BaryCoordNoPerspKHR, {4160, 4161, 4162}}, |
| // clang-format off |
| } }; |
| |
| uint32_t GetVUIDForBuiltin(spv::BuiltIn builtIn, VUIDError type) { |
| uint32_t vuid = 0; |
| for (const auto& iter: builtinVUIDInfo) { |
| if (iter.builtIn == builtIn) { |
| assert(type < VUIDErrorMax); |
| vuid = iter.vuid[type]; |
| break; |
| } |
| } |
| return vuid; |
| } |
| |
| bool IsExecutionModelValidForRtBuiltIn(spv::BuiltIn builtin, |
| spv::ExecutionModel stage) { |
| switch (builtin) { |
| case spv::BuiltIn::HitKindKHR: |
| case spv::BuiltIn::HitTNV: |
| if (stage == spv::ExecutionModel::AnyHitKHR || |
| stage == spv::ExecutionModel::ClosestHitKHR) { |
| return true; |
| } |
| break; |
| case spv::BuiltIn::InstanceCustomIndexKHR: |
| case spv::BuiltIn::InstanceId: |
| case spv::BuiltIn::RayGeometryIndexKHR: |
| case spv::BuiltIn::ObjectRayDirectionKHR: |
| case spv::BuiltIn::ObjectRayOriginKHR: |
| case spv::BuiltIn::ObjectToWorldKHR: |
| case spv::BuiltIn::WorldToObjectKHR: |
| switch (stage) { |
| case spv::ExecutionModel::IntersectionKHR: |
| case spv::ExecutionModel::AnyHitKHR: |
| case spv::ExecutionModel::ClosestHitKHR: |
| return true; |
| default: |
| return false; |
| } |
| break; |
| case spv::BuiltIn::IncomingRayFlagsKHR: |
| case spv::BuiltIn::RayTminKHR: |
| case spv::BuiltIn::RayTmaxKHR: |
| case spv::BuiltIn::WorldRayDirectionKHR: |
| case spv::BuiltIn::WorldRayOriginKHR: |
| case spv::BuiltIn::CullMaskKHR: |
| switch (stage) { |
| case spv::ExecutionModel::IntersectionKHR: |
| case spv::ExecutionModel::AnyHitKHR: |
| case spv::ExecutionModel::ClosestHitKHR: |
| case spv::ExecutionModel::MissKHR: |
| return true; |
| default: |
| return false; |
| } |
| break; |
| case spv::BuiltIn::LaunchIdKHR: |
| case spv::BuiltIn::LaunchSizeKHR: |
| switch (stage) { |
| case spv::ExecutionModel::RayGenerationKHR: |
| case spv::ExecutionModel::IntersectionKHR: |
| case spv::ExecutionModel::AnyHitKHR: |
| case spv::ExecutionModel::ClosestHitKHR: |
| case spv::ExecutionModel::MissKHR: |
| case spv::ExecutionModel::CallableKHR: |
| return true; |
| default: |
| return false; |
| } |
| break; |
| default: |
| break; |
| } |
| return false; |
| } |
| |
| // Helper class managing validation of built-ins. |
| // TODO: Generic functionality of this class can be moved into |
| // ValidationState_t to be made available to other users. |
| class BuiltInsValidator { |
| public: |
| BuiltInsValidator(ValidationState_t& vstate) : _(vstate) {} |
| |
| // Run validation. |
| spv_result_t Run(); |
| |
| private: |
| // Goes through all decorations in the module, if decoration is BuiltIn |
| // calls ValidateSingleBuiltInAtDefinition(). |
| spv_result_t ValidateBuiltInsAtDefinition(); |
| |
| // Validates the instruction defining an id with built-in decoration. |
| // Can be called multiple times for the same id, if multiple built-ins are |
| // specified. Seeds id_to_at_reference_checks_ with decorated ids if needed. |
| spv_result_t ValidateSingleBuiltInAtDefinition(const Decoration& decoration, |
| const Instruction& inst); |
| |
| // The following section contains functions which are called when id defined |
| // by |inst| is decorated with BuiltIn |decoration|. |
| // Most functions are specific to a single built-in and have naming scheme: |
| // ValidateXYZAtDefinition. Some functions are common to multiple kinds of |
| // BuiltIn. |
| spv_result_t ValidateClipOrCullDistanceAtDefinition( |
| const Decoration& decoration, const Instruction& inst); |
| spv_result_t ValidateFragCoordAtDefinition(const Decoration& decoration, |
| const Instruction& inst); |
| spv_result_t ValidateFragDepthAtDefinition(const Decoration& decoration, |
| const Instruction& inst); |
| spv_result_t ValidateFrontFacingAtDefinition(const Decoration& decoration, |
| const Instruction& inst); |
| spv_result_t ValidateHelperInvocationAtDefinition( |
| const Decoration& decoration, const Instruction& inst); |
| spv_result_t ValidateInvocationIdAtDefinition(const Decoration& decoration, |
| const Instruction& inst); |
| spv_result_t ValidateInstanceIndexAtDefinition(const Decoration& decoration, |
| const Instruction& inst); |
| spv_result_t ValidateLayerOrViewportIndexAtDefinition( |
| const Decoration& decoration, const Instruction& inst); |
| spv_result_t ValidatePatchVerticesAtDefinition(const Decoration& decoration, |
| const Instruction& inst); |
| spv_result_t ValidatePointCoordAtDefinition(const Decoration& decoration, |
| const Instruction& inst); |
| spv_result_t ValidatePointSizeAtDefinition(const Decoration& decoration, |
| const Instruction& inst); |
| spv_result_t ValidatePositionAtDefinition(const Decoration& decoration, |
| const Instruction& inst); |
| spv_result_t ValidatePrimitiveIdAtDefinition(const Decoration& decoration, |
| const Instruction& inst); |
| spv_result_t ValidateSampleIdAtDefinition(const Decoration& decoration, |
| const Instruction& inst); |
| spv_result_t ValidateSampleMaskAtDefinition(const Decoration& decoration, |
| const Instruction& inst); |
| spv_result_t ValidateSamplePositionAtDefinition(const Decoration& decoration, |
| const Instruction& inst); |
| spv_result_t ValidateTessCoordAtDefinition(const Decoration& decoration, |
| const Instruction& inst); |
| spv_result_t ValidateTessLevelOuterAtDefinition(const Decoration& decoration, |
| const Instruction& inst); |
| spv_result_t ValidateTessLevelInnerAtDefinition(const Decoration& decoration, |
| const Instruction& inst); |
| spv_result_t ValidateVertexIndexAtDefinition(const Decoration& decoration, |
| const Instruction& inst); |
| spv_result_t ValidateVertexIdAtDefinition(const Decoration& decoration, |
| const Instruction& inst); |
| spv_result_t ValidateLocalInvocationIndexAtDefinition( |
| const Decoration& decoration, const Instruction& inst); |
| spv_result_t ValidateWorkgroupSizeAtDefinition(const Decoration& decoration, |
| const Instruction& inst); |
| spv_result_t ValidateBaseInstanceOrVertexAtDefinition( |
| const Decoration& decoration, const Instruction& inst); |
| spv_result_t ValidateDrawIndexAtDefinition(const Decoration& decoration, |
| const Instruction& inst); |
| spv_result_t ValidateViewIndexAtDefinition(const Decoration& decoration, |
| const Instruction& inst); |
| spv_result_t ValidateDeviceIndexAtDefinition(const Decoration& decoration, |
| const Instruction& inst); |
| spv_result_t ValidateFragInvocationCountAtDefinition(const Decoration& decoration, |
| const Instruction& inst); |
| spv_result_t ValidateFragSizeAtDefinition(const Decoration& decoration, |
| const Instruction& inst); |
| spv_result_t ValidateFragStencilRefAtDefinition(const Decoration& decoration, |
| const Instruction& inst); |
| spv_result_t ValidateFullyCoveredAtDefinition(const Decoration& decoration, |
| const Instruction& inst); |
| // Used for GlobalInvocationId, LocalInvocationId, NumWorkgroups, WorkgroupId. |
| spv_result_t ValidateComputeShaderI32Vec3InputAtDefinition( |
| const Decoration& decoration, const Instruction& inst); |
| spv_result_t ValidateNVSMOrARMCoreBuiltinsAtDefinition(const Decoration& decoration, |
| const Instruction& inst); |
| // Used for BaryCoord, BaryCoordNoPersp. |
| spv_result_t ValidateFragmentShaderF32Vec3InputAtDefinition( |
| const Decoration& decoration, const Instruction& inst); |
| // Used for SubgroupEqMask, SubgroupGeMask, SubgroupGtMask, SubgroupLtMask, |
| // SubgroupLeMask. |
| spv_result_t ValidateI32Vec4InputAtDefinition(const Decoration& decoration, |
| const Instruction& inst); |
| // Used for SubgroupLocalInvocationId, SubgroupSize. |
| spv_result_t ValidateI32InputAtDefinition(const Decoration& decoration, |
| const Instruction& inst); |
| // Used for SubgroupId, NumSubgroups. |
| spv_result_t ValidateComputeI32InputAtDefinition(const Decoration& decoration, |
| const Instruction& inst); |
| |
| spv_result_t ValidatePrimitiveShadingRateAtDefinition( |
| const Decoration& decoration, const Instruction& inst); |
| |
| spv_result_t ValidateShadingRateAtDefinition(const Decoration& decoration, |
| const Instruction& inst); |
| |
| spv_result_t ValidateRayTracingBuiltinsAtDefinition( |
| const Decoration& decoration, const Instruction& inst); |
| |
| // The following section contains functions which are called when id defined |
| // by |referenced_inst| is |
| // 1. referenced by |referenced_from_inst| |
| // 2. dependent on |built_in_inst| which is decorated with BuiltIn |
| // |decoration|. Most functions are specific to a single built-in and have |
| // naming scheme: ValidateXYZAtReference. Some functions are common to |
| // multiple kinds of BuiltIn. |
| spv_result_t ValidateFragCoordAtReference( |
| const Decoration& decoration, const Instruction& built_in_inst, |
| const Instruction& referenced_inst, |
| const Instruction& referenced_from_inst); |
| |
| spv_result_t ValidateFragDepthAtReference( |
| const Decoration& decoration, const Instruction& built_in_inst, |
| const Instruction& referenced_inst, |
| const Instruction& referenced_from_inst); |
| |
| spv_result_t ValidateFrontFacingAtReference( |
| const Decoration& decoration, const Instruction& built_in_inst, |
| const Instruction& referenced_inst, |
| const Instruction& referenced_from_inst); |
| |
| spv_result_t ValidateHelperInvocationAtReference( |
| const Decoration& decoration, const Instruction& built_in_inst, |
| const Instruction& referenced_inst, |
| const Instruction& referenced_from_inst); |
| |
| spv_result_t ValidateInvocationIdAtReference( |
| const Decoration& decoration, const Instruction& built_in_inst, |
| const Instruction& referenced_inst, |
| const Instruction& referenced_from_inst); |
| |
| spv_result_t ValidateInstanceIndexAtReference( |
| const Decoration& decoration, const Instruction& built_in_inst, |
| const Instruction& referenced_inst, |
| const Instruction& referenced_from_inst); |
| |
| spv_result_t ValidatePatchVerticesAtReference( |
| const Decoration& decoration, const Instruction& built_in_inst, |
| const Instruction& referenced_inst, |
| const Instruction& referenced_from_inst); |
| |
| spv_result_t ValidatePointCoordAtReference( |
| const Decoration& decoration, const Instruction& built_in_inst, |
| const Instruction& referenced_inst, |
| const Instruction& referenced_from_inst); |
| |
| spv_result_t ValidatePointSizeAtReference( |
| const Decoration& decoration, const Instruction& built_in_inst, |
| const Instruction& referenced_inst, |
| const Instruction& referenced_from_inst); |
| |
| spv_result_t ValidatePositionAtReference( |
| const Decoration& decoration, const Instruction& built_in_inst, |
| const Instruction& referenced_inst, |
| const Instruction& referenced_from_inst); |
| |
| spv_result_t ValidatePrimitiveIdAtReference( |
| const Decoration& decoration, const Instruction& built_in_inst, |
| const Instruction& referenced_inst, |
| const Instruction& referenced_from_inst); |
| |
| spv_result_t ValidateSampleIdAtReference( |
| const Decoration& decoration, const Instruction& built_in_inst, |
| const Instruction& referenced_inst, |
| const Instruction& referenced_from_inst); |
| |
| spv_result_t ValidateSampleMaskAtReference( |
| const Decoration& decoration, const Instruction& built_in_inst, |
| const Instruction& referenced_inst, |
| const Instruction& referenced_from_inst); |
| |
| spv_result_t ValidateSamplePositionAtReference( |
| const Decoration& decoration, const Instruction& built_in_inst, |
| const Instruction& referenced_inst, |
| const Instruction& referenced_from_inst); |
| |
| spv_result_t ValidateTessCoordAtReference( |
| const Decoration& decoration, const Instruction& built_in_inst, |
| const Instruction& referenced_inst, |
| const Instruction& referenced_from_inst); |
| |
| spv_result_t ValidateTessLevelAtReference( |
| const Decoration& decoration, const Instruction& built_in_inst, |
| const Instruction& referenced_inst, |
| const Instruction& referenced_from_inst); |
| |
| spv_result_t ValidateLocalInvocationIndexAtReference( |
| const Decoration& decoration, const Instruction& built_in_inst, |
| const Instruction& referenced_inst, |
| const Instruction& referenced_from_inst); |
| |
| spv_result_t ValidateVertexIndexAtReference( |
| const Decoration& decoration, const Instruction& built_in_inst, |
| const Instruction& referenced_inst, |
| const Instruction& referenced_from_inst); |
| |
| spv_result_t ValidateLayerOrViewportIndexAtReference( |
| const Decoration& decoration, const Instruction& built_in_inst, |
| const Instruction& referenced_inst, |
| const Instruction& referenced_from_inst); |
| |
| spv_result_t ValidateWorkgroupSizeAtReference( |
| const Decoration& decoration, const Instruction& built_in_inst, |
| const Instruction& referenced_inst, |
| const Instruction& referenced_from_inst); |
| |
| spv_result_t ValidateClipOrCullDistanceAtReference( |
| const Decoration& decoration, const Instruction& built_in_inst, |
| const Instruction& referenced_inst, |
| const Instruction& referenced_from_inst); |
| |
| spv_result_t ValidateBaseInstanceOrVertexAtReference( |
| const Decoration& decoration, const Instruction& built_in_inst, |
| const Instruction& referenced_inst, |
| const Instruction& referenced_from_inst); |
| |
| spv_result_t ValidateDrawIndexAtReference( |
| const Decoration& decoration, const Instruction& built_in_inst, |
| const Instruction& referenced_inst, |
| const Instruction& referenced_from_inst); |
| |
| spv_result_t ValidateViewIndexAtReference( |
| const Decoration& decoration, const Instruction& built_in_inst, |
| const Instruction& referenced_inst, |
| const Instruction& referenced_from_inst); |
| |
| spv_result_t ValidateDeviceIndexAtReference( |
| const Decoration& decoration, const Instruction& built_in_inst, |
| const Instruction& referenced_inst, |
| const Instruction& referenced_from_inst); |
| |
| spv_result_t ValidateFragInvocationCountAtReference( |
| const Decoration& decoration, const Instruction& built_in_inst, |
| const Instruction& referenced_inst, |
| const Instruction& referenced_from_inst); |
| |
| spv_result_t ValidateFragSizeAtReference( |
| const Decoration& decoration, const Instruction& built_in_inst, |
| const Instruction& referenced_inst, |
| const Instruction& referenced_from_inst); |
| |
| spv_result_t ValidateFragStencilRefAtReference( |
| const Decoration& decoration, const Instruction& built_in_inst, |
| const Instruction& referenced_inst, |
| const Instruction& referenced_from_inst); |
| |
| spv_result_t ValidateFullyCoveredAtReference( |
| const Decoration& decoration, const Instruction& built_in_inst, |
| const Instruction& referenced_inst, |
| const Instruction& referenced_from_inst); |
| |
| // Used for GlobalInvocationId, LocalInvocationId, NumWorkgroups, WorkgroupId. |
| spv_result_t ValidateComputeShaderI32Vec3InputAtReference( |
| const Decoration& decoration, const Instruction& built_in_inst, |
| const Instruction& referenced_inst, |
| const Instruction& referenced_from_inst); |
| |
| // Used for BaryCoord, BaryCoordNoPersp. |
| spv_result_t ValidateFragmentShaderF32Vec3InputAtReference( |
| const Decoration& decoration, const Instruction& built_in_inst, |
| const Instruction& referenced_inst, |
| const Instruction& referenced_from_inst); |
| |
| // Used for SubgroupId and NumSubgroups. |
| spv_result_t ValidateComputeI32InputAtReference( |
| const Decoration& decoration, const Instruction& built_in_inst, |
| const Instruction& referenced_inst, |
| const Instruction& referenced_from_inst); |
| |
| spv_result_t ValidateNVSMOrARMCoreBuiltinsAtReference( |
| const Decoration& decoration, const Instruction& built_in_inst, |
| const Instruction& referenced_inst, |
| const Instruction& referenced_from_inst); |
| |
| spv_result_t ValidatePrimitiveShadingRateAtReference( |
| const Decoration& decoration, const Instruction& built_in_inst, |
| const Instruction& referenced_inst, |
| const Instruction& referenced_from_inst); |
| |
| spv_result_t ValidateShadingRateAtReference( |
| const Decoration& decoration, const Instruction& built_in_inst, |
| const Instruction& referenced_inst, |
| const Instruction& referenced_from_inst); |
| |
| spv_result_t ValidateRayTracingBuiltinsAtReference( |
| const Decoration& decoration, const Instruction& built_in_inst, |
| const Instruction& referenced_inst, |
| const Instruction& referenced_from_inst); |
| |
| // Validates that |built_in_inst| is not (even indirectly) referenced from |
| // within a function which can be called with |execution_model|. |
| // |
| // |vuid| - Vulkan ID for the error, or a negative value if none. |
| // |comment| - text explaining why the restriction was imposed. |
| // |decoration| - BuiltIn decoration which causes the restriction. |
| // |referenced_inst| - instruction which is dependent on |built_in_inst| and |
| // defines the id which was referenced. |
| // |referenced_from_inst| - instruction which references id defined by |
| // |referenced_inst| from within a function. |
| spv_result_t ValidateNotCalledWithExecutionModel( |
| int vuid, const char* comment, spv::ExecutionModel execution_model, |
| const Decoration& decoration, const Instruction& built_in_inst, |
| const Instruction& referenced_inst, |
| const Instruction& referenced_from_inst); |
| |
| // The following section contains functions which check that the decorated |
| // variable has the type specified in the function name. |diag| would be |
| // called with a corresponding error message, if validation is not successful. |
| spv_result_t ValidateBool( |
| const Decoration& decoration, const Instruction& inst, |
| const std::function<spv_result_t(const std::string& message)>& diag); |
| spv_result_t ValidateI( |
| const Decoration& decoration, const Instruction& inst, |
| const std::function<spv_result_t(const std::string& message)>& diag); |
| spv_result_t ValidateI32( |
| const Decoration& decoration, const Instruction& inst, |
| const std::function<spv_result_t(const std::string& message)>& diag); |
| spv_result_t ValidateI32Vec( |
| const Decoration& decoration, const Instruction& inst, |
| uint32_t num_components, |
| const std::function<spv_result_t(const std::string& message)>& diag); |
| spv_result_t ValidateI32Arr( |
| const Decoration& decoration, const Instruction& inst, |
| const std::function<spv_result_t(const std::string& message)>& diag); |
| spv_result_t ValidateOptionalArrayedI32( |
| const Decoration& decoration, const Instruction& inst, |
| const std::function<spv_result_t(const std::string& message)>& diag); |
| spv_result_t ValidateI32Helper( |
| const Decoration& decoration, const Instruction& inst, |
| const std::function<spv_result_t(const std::string& message)>& diag, |
| uint32_t underlying_type); |
| spv_result_t ValidateF32( |
| const Decoration& decoration, const Instruction& inst, |
| const std::function<spv_result_t(const std::string& message)>& diag); |
| spv_result_t ValidateOptionalArrayedF32( |
| const Decoration& decoration, const Instruction& inst, |
| const std::function<spv_result_t(const std::string& message)>& diag); |
| spv_result_t ValidateF32Helper( |
| const Decoration& decoration, const Instruction& inst, |
| const std::function<spv_result_t(const std::string& message)>& diag, |
| uint32_t underlying_type); |
| spv_result_t ValidateF32Vec( |
| const Decoration& decoration, const Instruction& inst, |
| uint32_t num_components, |
| const std::function<spv_result_t(const std::string& message)>& diag); |
| spv_result_t ValidateOptionalArrayedF32Vec( |
| const Decoration& decoration, const Instruction& inst, |
| uint32_t num_components, |
| const std::function<spv_result_t(const std::string& message)>& diag); |
| spv_result_t ValidateF32VecHelper( |
| const Decoration& decoration, const Instruction& inst, |
| uint32_t num_components, |
| const std::function<spv_result_t(const std::string& message)>& diag, |
| uint32_t underlying_type); |
| // If |num_components| is zero, the number of components is not checked. |
| spv_result_t ValidateF32Arr( |
| const Decoration& decoration, const Instruction& inst, |
| uint32_t num_components, |
| const std::function<spv_result_t(const std::string& message)>& diag); |
| spv_result_t ValidateOptionalArrayedF32Arr( |
| const Decoration& decoration, const Instruction& inst, |
| uint32_t num_components, |
| const std::function<spv_result_t(const std::string& message)>& diag); |
| spv_result_t ValidateF32ArrHelper( |
| const Decoration& decoration, const Instruction& inst, |
| uint32_t num_components, |
| const std::function<spv_result_t(const std::string& message)>& diag, |
| uint32_t underlying_type); |
| spv_result_t ValidateF32Mat( |
| const Decoration& decoration, const Instruction& inst, |
| uint32_t req_num_rows, uint32_t req_num_columns, |
| const std::function<spv_result_t(const std::string& message)>& diag); |
| |
| // Generates strings like "Member #0 of struct ID <2>". |
| std::string GetDefinitionDesc(const Decoration& decoration, |
| const Instruction& inst) const; |
| |
| // Generates strings like "ID <51> (OpTypePointer) is referencing ID <2> |
| // (OpTypeStruct) which is decorated with BuiltIn Position". |
| std::string GetReferenceDesc( |
| const Decoration& decoration, const Instruction& built_in_inst, |
| const Instruction& referenced_inst, |
| const Instruction& referenced_from_inst, |
| spv::ExecutionModel execution_model = spv::ExecutionModel::Max) const; |
| |
| // Generates strings like "ID <51> (OpTypePointer) uses storage class |
| // UniformConstant". |
| std::string GetStorageClassDesc(const Instruction& inst) const; |
| |
| // Updates inner working of the class. Is called sequentially for every |
| // instruction. |
| void Update(const Instruction& inst); |
| |
| ValidationState_t& _; |
| |
| // Mapping id -> list of rules which validate instruction referencing the |
| // id. Rules can create new rules and add them to this container. |
| // Using std::map, and not std::unordered_map to avoid iterator invalidation |
| // during rehashing. |
| std::map<uint32_t, std::list<std::function<spv_result_t(const Instruction&)>>> |
| id_to_at_reference_checks_; |
| |
| // Id of the function we are currently inside. 0 if not inside a function. |
| uint32_t function_id_ = 0; |
| |
| // Entry points which can (indirectly) call the current function. |
| // The pointer either points to a vector inside to function_to_entry_points_ |
| // or to no_entry_points_. The pointer is guaranteed to never be null. |
| const std::vector<uint32_t> no_entry_points; |
| const std::vector<uint32_t>* entry_points_ = &no_entry_points; |
| |
| // Execution models with which the current function can be called. |
| std::set<spv::ExecutionModel> execution_models_; |
| }; |
| |
| void BuiltInsValidator::Update(const Instruction& inst) { |
| const spv::Op opcode = inst.opcode(); |
| if (opcode == spv::Op::OpFunction) { |
| // Entering a function. |
| assert(function_id_ == 0); |
| function_id_ = inst.id(); |
| execution_models_.clear(); |
| entry_points_ = &_.FunctionEntryPoints(function_id_); |
| // Collect execution models from all entry points from which the current |
| // function can be called. |
| for (const uint32_t entry_point : *entry_points_) { |
| if (const auto* models = _.GetExecutionModels(entry_point)) { |
| execution_models_.insert(models->begin(), models->end()); |
| } |
| } |
| } |
| |
| if (opcode == spv::Op::OpFunctionEnd) { |
| // Exiting a function. |
| assert(function_id_ != 0); |
| function_id_ = 0; |
| entry_points_ = &no_entry_points; |
| execution_models_.clear(); |
| } |
| } |
| |
| std::string BuiltInsValidator::GetDefinitionDesc( |
| const Decoration& decoration, const Instruction& inst) const { |
| std::ostringstream ss; |
| if (decoration.struct_member_index() != Decoration::kInvalidMember) { |
| assert(inst.opcode() == spv::Op::OpTypeStruct); |
| ss << "Member #" << decoration.struct_member_index(); |
| ss << " of struct ID <" << inst.id() << ">"; |
| } else { |
| ss << GetIdDesc(inst); |
| } |
| return ss.str(); |
| } |
| |
| std::string BuiltInsValidator::GetReferenceDesc( |
| const Decoration& decoration, const Instruction& built_in_inst, |
| const Instruction& referenced_inst, const Instruction& referenced_from_inst, |
| spv::ExecutionModel execution_model) const { |
| std::ostringstream ss; |
| ss << GetIdDesc(referenced_from_inst) << " is referencing " |
| << GetIdDesc(referenced_inst); |
| if (built_in_inst.id() != referenced_inst.id()) { |
| ss << " which is dependent on " << GetIdDesc(built_in_inst); |
| } |
| |
| ss << " which is decorated with BuiltIn "; |
| ss << _.grammar().lookupOperandName(SPV_OPERAND_TYPE_BUILT_IN, |
| decoration.params()[0]); |
| if (function_id_) { |
| ss << " in function <" << function_id_ << ">"; |
| if (execution_model != spv::ExecutionModel::Max) { |
| ss << " called with execution model "; |
| ss << _.grammar().lookupOperandName(SPV_OPERAND_TYPE_EXECUTION_MODEL, |
| uint32_t(execution_model)); |
| } |
| } |
| ss << "."; |
| return ss.str(); |
| } |
| |
| std::string BuiltInsValidator::GetStorageClassDesc( |
| const Instruction& inst) const { |
| std::ostringstream ss; |
| ss << GetIdDesc(inst) << " uses storage class "; |
| ss << _.grammar().lookupOperandName(SPV_OPERAND_TYPE_STORAGE_CLASS, |
| uint32_t(GetStorageClass(inst))); |
| ss << "."; |
| return ss.str(); |
| } |
| |
| spv_result_t BuiltInsValidator::ValidateBool( |
| const Decoration& decoration, const Instruction& inst, |
| const std::function<spv_result_t(const std::string& message)>& diag) { |
| uint32_t underlying_type = 0; |
| if (spv_result_t error = |
| GetUnderlyingType(_, decoration, inst, &underlying_type)) { |
| return error; |
| } |
| |
| if (!_.IsBoolScalarType(underlying_type)) { |
| return diag(GetDefinitionDesc(decoration, inst) + " is not a bool scalar."); |
| } |
| |
| return SPV_SUCCESS; |
| } |
| |
| spv_result_t BuiltInsValidator::ValidateI( |
| const Decoration& decoration, const Instruction& inst, |
| const std::function<spv_result_t(const std::string& message)>& diag) { |
| uint32_t underlying_type = 0; |
| if (spv_result_t error = |
| GetUnderlyingType(_, decoration, inst, &underlying_type)) { |
| return error; |
| } |
| |
| if (!_.IsIntScalarType(underlying_type)) { |
| return diag(GetDefinitionDesc(decoration, inst) + " is not an int scalar."); |
| } |
| |
| return SPV_SUCCESS; |
| } |
| |
| spv_result_t BuiltInsValidator::ValidateI32( |
| const Decoration& decoration, const Instruction& inst, |
| const std::function<spv_result_t(const std::string& message)>& diag) { |
| uint32_t underlying_type = 0; |
| if (spv_result_t error = |
| GetUnderlyingType(_, decoration, inst, &underlying_type)) { |
| return error; |
| } |
| |
| return ValidateI32Helper(decoration, inst, diag, underlying_type); |
| } |
| |
| spv_result_t BuiltInsValidator::ValidateOptionalArrayedI32( |
| const Decoration& decoration, const Instruction& inst, |
| const std::function<spv_result_t(const std::string& message)>& diag) { |
| uint32_t underlying_type = 0; |
| if (spv_result_t error = |
| GetUnderlyingType(_, decoration, inst, &underlying_type)) { |
| return error; |
| } |
| |
| // Strip the array, if present. |
| if (_.GetIdOpcode(underlying_type) == spv::Op::OpTypeArray) { |
| underlying_type = _.FindDef(underlying_type)->word(2u); |
| } |
| |
| return ValidateI32Helper(decoration, inst, diag, underlying_type); |
| } |
| |
| spv_result_t BuiltInsValidator::ValidateI32Helper( |
| const Decoration& decoration, const Instruction& inst, |
| const std::function<spv_result_t(const std::string& message)>& diag, |
| uint32_t underlying_type) { |
| if (!_.IsIntScalarType(underlying_type)) { |
| return diag(GetDefinitionDesc(decoration, inst) + " is not an int scalar."); |
| } |
| |
| const uint32_t bit_width = _.GetBitWidth(underlying_type); |
| if (bit_width != 32) { |
| std::ostringstream ss; |
| ss << GetDefinitionDesc(decoration, inst) << " has bit width " << bit_width |
| << "."; |
| return diag(ss.str()); |
| } |
| |
| return SPV_SUCCESS; |
| } |
| |
| spv_result_t BuiltInsValidator::ValidateOptionalArrayedF32( |
| const Decoration& decoration, const Instruction& inst, |
| const std::function<spv_result_t(const std::string& message)>& diag) { |
| uint32_t underlying_type = 0; |
| if (spv_result_t error = |
| GetUnderlyingType(_, decoration, inst, &underlying_type)) { |
| return error; |
| } |
| |
| // Strip the array, if present. |
| if (_.GetIdOpcode(underlying_type) == spv::Op::OpTypeArray) { |
| underlying_type = _.FindDef(underlying_type)->word(2u); |
| } |
| |
| return ValidateF32Helper(decoration, inst, diag, underlying_type); |
| } |
| |
| spv_result_t BuiltInsValidator::ValidateF32( |
| const Decoration& decoration, const Instruction& inst, |
| const std::function<spv_result_t(const std::string& message)>& diag) { |
| uint32_t underlying_type = 0; |
| if (spv_result_t error = |
| GetUnderlyingType(_, decoration, inst, &underlying_type)) { |
| return error; |
| } |
| |
| return ValidateF32Helper(decoration, inst, diag, underlying_type); |
| } |
| |
| spv_result_t BuiltInsValidator::ValidateF32Helper( |
| const Decoration& decoration, const Instruction& inst, |
| const std::function<spv_result_t(const std::string& message)>& diag, |
| uint32_t underlying_type) { |
| if (!_.IsFloatScalarType(underlying_type)) { |
| return diag(GetDefinitionDesc(decoration, inst) + |
| " is not a float scalar."); |
| } |
| |
| const uint32_t bit_width = _.GetBitWidth(underlying_type); |
| if (bit_width != 32) { |
| std::ostringstream ss; |
| ss << GetDefinitionDesc(decoration, inst) << " has bit width " << bit_width |
| << "."; |
| return diag(ss.str()); |
| } |
| |
| return SPV_SUCCESS; |
| } |
| |
| spv_result_t BuiltInsValidator::ValidateI32Vec( |
| const Decoration& decoration, const Instruction& inst, |
| uint32_t num_components, |
| const std::function<spv_result_t(const std::string& message)>& diag) { |
| uint32_t underlying_type = 0; |
| if (spv_result_t error = |
| GetUnderlyingType(_, decoration, inst, &underlying_type)) { |
| return error; |
| } |
| |
| if (!_.IsIntVectorType(underlying_type)) { |
| return diag(GetDefinitionDesc(decoration, inst) + " is not an int vector."); |
| } |
| |
| const uint32_t actual_num_components = _.GetDimension(underlying_type); |
| if (_.GetDimension(underlying_type) != num_components) { |
| std::ostringstream ss; |
| ss << GetDefinitionDesc(decoration, inst) << " has " |
| << actual_num_components << " components."; |
| return diag(ss.str()); |
| } |
| |
| const uint32_t bit_width = _.GetBitWidth(underlying_type); |
| if (bit_width != 32) { |
| std::ostringstream ss; |
| ss << GetDefinitionDesc(decoration, inst) |
| << " has components with bit width " << bit_width << "."; |
| return diag(ss.str()); |
| } |
| |
| return SPV_SUCCESS; |
| } |
| |
| spv_result_t BuiltInsValidator::ValidateOptionalArrayedF32Vec( |
| const Decoration& decoration, const Instruction& inst, |
| uint32_t num_components, |
| const std::function<spv_result_t(const std::string& message)>& diag) { |
| uint32_t underlying_type = 0; |
| if (spv_result_t error = |
| GetUnderlyingType(_, decoration, inst, &underlying_type)) { |
| return error; |
| } |
| |
| // Strip the array, if present. |
| if (_.GetIdOpcode(underlying_type) == spv::Op::OpTypeArray) { |
| underlying_type = _.FindDef(underlying_type)->word(2u); |
| } |
| |
| return ValidateF32VecHelper(decoration, inst, num_components, diag, |
| underlying_type); |
| } |
| |
| spv_result_t BuiltInsValidator::ValidateF32Vec( |
| const Decoration& decoration, const Instruction& inst, |
| uint32_t num_components, |
| const std::function<spv_result_t(const std::string& message)>& diag) { |
| uint32_t underlying_type = 0; |
| if (spv_result_t error = |
| GetUnderlyingType(_, decoration, inst, &underlying_type)) { |
| return error; |
| } |
| |
| return ValidateF32VecHelper(decoration, inst, num_components, diag, |
| underlying_type); |
| } |
| |
| spv_result_t BuiltInsValidator::ValidateF32VecHelper( |
| const Decoration& decoration, const Instruction& inst, |
| uint32_t num_components, |
| const std::function<spv_result_t(const std::string& message)>& diag, |
| uint32_t underlying_type) { |
| if (!_.IsFloatVectorType(underlying_type)) { |
| return diag(GetDefinitionDesc(decoration, inst) + |
| " is not a float vector."); |
| } |
| |
| const uint32_t actual_num_components = _.GetDimension(underlying_type); |
| if (_.GetDimension(underlying_type) != num_components) { |
| std::ostringstream ss; |
| ss << GetDefinitionDesc(decoration, inst) << " has " |
| << actual_num_components << " components."; |
| return diag(ss.str()); |
| } |
| |
| const uint32_t bit_width = _.GetBitWidth(underlying_type); |
| if (bit_width != 32) { |
| std::ostringstream ss; |
| ss << GetDefinitionDesc(decoration, inst) |
| << " has components with bit width " << bit_width << "."; |
| return diag(ss.str()); |
| } |
| |
| return SPV_SUCCESS; |
| } |
| |
| spv_result_t BuiltInsValidator::ValidateI32Arr( |
| const Decoration& decoration, const Instruction& inst, |
| const std::function<spv_result_t(const std::string& message)>& diag) { |
| uint32_t underlying_type = 0; |
| if (spv_result_t error = |
| GetUnderlyingType(_, decoration, inst, &underlying_type)) { |
| return error; |
| } |
| |
| const Instruction* const type_inst = _.FindDef(underlying_type); |
| if (type_inst->opcode() != spv::Op::OpTypeArray) { |
| return diag(GetDefinitionDesc(decoration, inst) + " is not an array."); |
| } |
| |
| const uint32_t component_type = type_inst->word(2); |
| if (!_.IsIntScalarType(component_type)) { |
| return diag(GetDefinitionDesc(decoration, inst) + |
| " components are not int scalar."); |
| } |
| |
| const uint32_t bit_width = _.GetBitWidth(component_type); |
| if (bit_width != 32) { |
| std::ostringstream ss; |
| ss << GetDefinitionDesc(decoration, inst) |
| << " has components with bit width " << bit_width << "."; |
| return diag(ss.str()); |
| } |
| |
| return SPV_SUCCESS; |
| } |
| |
| spv_result_t BuiltInsValidator::ValidateF32Arr( |
| const Decoration& decoration, const Instruction& inst, |
| uint32_t num_components, |
| const std::function<spv_result_t(const std::string& message)>& diag) { |
| uint32_t underlying_type = 0; |
| if (spv_result_t error = |
| GetUnderlyingType(_, decoration, inst, &underlying_type)) { |
| return error; |
| } |
| |
| return ValidateF32ArrHelper(decoration, inst, num_components, diag, |
| underlying_type); |
| } |
| |
| spv_result_t BuiltInsValidator::ValidateOptionalArrayedF32Arr( |
| const Decoration& decoration, const Instruction& inst, |
| uint32_t num_components, |
| const std::function<spv_result_t(const std::string& message)>& diag) { |
| uint32_t underlying_type = 0; |
| if (spv_result_t error = |
| GetUnderlyingType(_, decoration, inst, &underlying_type)) { |
| return error; |
| } |
| |
| // Strip an extra layer of arraying if present. |
| if (_.GetIdOpcode(underlying_type) == spv::Op::OpTypeArray) { |
| uint32_t subtype = _.FindDef(underlying_type)->word(2u); |
| if (_.GetIdOpcode(subtype) == spv::Op::OpTypeArray) { |
| underlying_type = subtype; |
| } |
| } |
| |
| return ValidateF32ArrHelper(decoration, inst, num_components, diag, |
| underlying_type); |
| } |
| |
| spv_result_t BuiltInsValidator::ValidateF32ArrHelper( |
| const Decoration& decoration, const Instruction& inst, |
| uint32_t num_components, |
| const std::function<spv_result_t(const std::string& message)>& diag, |
| uint32_t underlying_type) { |
| const Instruction* const type_inst = _.FindDef(underlying_type); |
| if (type_inst->opcode() != spv::Op::OpTypeArray) { |
| return diag(GetDefinitionDesc(decoration, inst) + " is not an array."); |
| } |
| |
| const uint32_t component_type = type_inst->word(2); |
| if (!_.IsFloatScalarType(component_type)) { |
| return diag(GetDefinitionDesc(decoration, inst) + |
| " components are not float scalar."); |
| } |
| |
| const uint32_t bit_width = _.GetBitWidth(component_type); |
| if (bit_width != 32) { |
| std::ostringstream ss; |
| ss << GetDefinitionDesc(decoration, inst) |
| << " has components with bit width " << bit_width << "."; |
| return diag(ss.str()); |
| } |
| |
| if (num_components != 0) { |
| uint64_t actual_num_components = 0; |
| if (!_.GetConstantValUint64(type_inst->word(3), &actual_num_components)) { |
| assert(0 && "Array type definition is corrupt"); |
| } |
| if (actual_num_components != num_components) { |
| std::ostringstream ss; |
| ss << GetDefinitionDesc(decoration, inst) << " has " |
| << actual_num_components << " components."; |
| return diag(ss.str()); |
| } |
| } |
| |
| return SPV_SUCCESS; |
| } |
| |
| spv_result_t BuiltInsValidator::ValidateF32Mat( |
| const Decoration& decoration, const Instruction& inst, |
| uint32_t req_num_rows, uint32_t req_num_columns, |
| const std::function<spv_result_t(const std::string& message)>& diag) { |
| uint32_t underlying_type = 0; |
| uint32_t num_rows = 0; |
| uint32_t num_cols = 0; |
| uint32_t col_type = 0; |
| uint32_t component_type = 0; |
| if (spv_result_t error = |
| GetUnderlyingType(_, decoration, inst, &underlying_type)) { |
| return error; |
| } |
| if (!_.GetMatrixTypeInfo(underlying_type, &num_rows, &num_cols, &col_type, |
| &component_type) || |
| num_rows != req_num_rows || num_cols != req_num_columns) { |
| std::ostringstream ss; |
| ss << GetDefinitionDesc(decoration, inst) << " has columns " << num_cols |
| << " and rows " << num_rows << " not equal to expected " |
| << req_num_columns << "x" << req_num_rows << "."; |
| return diag(ss.str()); |
| } |
| |
| return ValidateF32VecHelper(decoration, inst, req_num_rows, diag, col_type); |
| } |
| |
| spv_result_t BuiltInsValidator::ValidateNotCalledWithExecutionModel( |
| int vuid, const char* comment, spv::ExecutionModel execution_model, |
| const Decoration& decoration, const Instruction& built_in_inst, |
| const Instruction& referenced_inst, |
| const Instruction& referenced_from_inst) { |
| if (function_id_) { |
| if (execution_models_.count(execution_model)) { |
| const char* execution_model_str = _.grammar().lookupOperandName( |
| SPV_OPERAND_TYPE_EXECUTION_MODEL, uint32_t(execution_model)); |
| const char* built_in_str = _.grammar().lookupOperandName( |
| SPV_OPERAND_TYPE_BUILT_IN, decoration.params()[0]); |
| return _.diag(SPV_ERROR_INVALID_DATA, &referenced_from_inst) |
| << (vuid < 0 ? std::string("") : _.VkErrorID(vuid)) << comment |
| << " " << GetIdDesc(referenced_inst) << " depends on " |
| << GetIdDesc(built_in_inst) << " which is decorated with BuiltIn " |
| << built_in_str << "." |
| << " Id <" << referenced_inst.id() << "> is later referenced by " |
| << GetIdDesc(referenced_from_inst) << " in function <" |
| << function_id_ << "> which is called with execution model " |
| << execution_model_str << "."; |
| } |
| } else { |
| // Propagate this rule to all dependant ids in the global scope. |
| id_to_at_reference_checks_[referenced_from_inst.id()].push_back( |
| std::bind(&BuiltInsValidator::ValidateNotCalledWithExecutionModel, this, |
| vuid, comment, execution_model, decoration, built_in_inst, |
| referenced_from_inst, std::placeholders::_1)); |
| } |
| return SPV_SUCCESS; |
| } |
| |
| spv_result_t BuiltInsValidator::ValidateClipOrCullDistanceAtDefinition( |
| const Decoration& decoration, const Instruction& inst) { |
| // Seed at reference checks with this built-in. |
| return ValidateClipOrCullDistanceAtReference(decoration, inst, inst, inst); |
| } |
| |
| spv_result_t BuiltInsValidator::ValidateClipOrCullDistanceAtReference( |
| const Decoration& decoration, const Instruction& built_in_inst, |
| const Instruction& referenced_inst, |
| const Instruction& referenced_from_inst) { |
| uint32_t operand = decoration.params()[0]; |
| if (spvIsVulkanEnv(_.context()->target_env)) { |
| const spv::StorageClass storage_class = GetStorageClass(referenced_from_inst); |
| if (storage_class != spv::StorageClass::Max && |
| storage_class != spv::StorageClass::Input && |
| storage_class != spv::StorageClass::Output) { |
| uint32_t vuid = (spv::BuiltIn(decoration.params()[0]) == spv::BuiltIn::ClipDistance) ? 4190 : 4199; |
| return _.diag(SPV_ERROR_INVALID_DATA, &referenced_from_inst) |
| << _.VkErrorID(vuid) << "Vulkan spec allows BuiltIn " |
| << _.grammar().lookupOperandName(SPV_OPERAND_TYPE_BUILT_IN, |
| operand) |
| << " to be only used for variables with Input or Output storage " |
| "class. " |
| << GetReferenceDesc(decoration, built_in_inst, referenced_inst, |
| referenced_from_inst) |
| << " " << GetStorageClassDesc(referenced_from_inst); |
| } |
| |
| if (storage_class == spv::StorageClass::Input) { |
| assert(function_id_ == 0); |
| uint32_t vuid = (spv::BuiltIn(decoration.params()[0]) == spv::BuiltIn::ClipDistance) ? 4188 : 4197; |
| id_to_at_reference_checks_[referenced_from_inst.id()].push_back(std::bind( |
| &BuiltInsValidator::ValidateNotCalledWithExecutionModel, this, vuid, |
| "Vulkan spec doesn't allow BuiltIn ClipDistance/CullDistance to be " |
| "used for variables with Input storage class if execution model is " |
| "Vertex.", |
| spv::ExecutionModel::Vertex, decoration, built_in_inst, |
| referenced_from_inst, std::placeholders::_1)); |
| id_to_at_reference_checks_[referenced_from_inst.id()].push_back(std::bind( |
| &BuiltInsValidator::ValidateNotCalledWithExecutionModel, this, vuid, |
| "Vulkan spec doesn't allow BuiltIn ClipDistance/CullDistance to be " |
| "used for variables with Input storage class if execution model is " |
| "MeshNV.", |
| spv::ExecutionModel::MeshNV, decoration, built_in_inst, |
| referenced_from_inst, std::placeholders::_1)); |
| id_to_at_reference_checks_[referenced_from_inst.id()].push_back(std::bind( |
| &BuiltInsValidator::ValidateNotCalledWithExecutionModel, this, vuid, |
| "Vulkan spec doesn't allow BuiltIn ClipDistance/CullDistance to be " |
| "used for variables with Input storage class if execution model is " |
| "MeshEXT.", |
| spv::ExecutionModel::MeshEXT, decoration, built_in_inst, |
| referenced_from_inst, std::placeholders::_1)); |
| } |
| |
| if (storage_class == spv::StorageClass::Output) { |
| assert(function_id_ == 0); |
| uint32_t vuid = (spv::BuiltIn(decoration.params()[0]) == spv::BuiltIn::ClipDistance) ? 4189 : 4198; |
| id_to_at_reference_checks_[referenced_from_inst.id()].push_back(std::bind( |
| &BuiltInsValidator::ValidateNotCalledWithExecutionModel, this, vuid, |
| "Vulkan spec doesn't allow BuiltIn ClipDistance/CullDistance to be " |
| "used for variables with Output storage class if execution model is " |
| "Fragment.", |
| spv::ExecutionModel::Fragment, decoration, built_in_inst, |
| referenced_from_inst, std::placeholders::_1)); |
| } |
| |
| for (const spv::ExecutionModel execution_model : execution_models_) { |
| switch (execution_model) { |
| case spv::ExecutionModel::Fragment: |
| case spv::ExecutionModel::Vertex: { |
| if (spv_result_t error = ValidateF32Arr( |
| decoration, built_in_inst, /* Any number of components */ 0, |
| [this, &decoration, &referenced_from_inst]( |
| const std::string& message) -> spv_result_t { |
| uint32_t vuid = |
| (spv::BuiltIn(decoration.params()[0]) == spv::BuiltIn::ClipDistance) |
| ? 4191 |
| : 4200; |
| return _.diag(SPV_ERROR_INVALID_DATA, &referenced_from_inst) |
| << _.VkErrorID(vuid) |
| << "According to the Vulkan spec BuiltIn " |
| << _.grammar().lookupOperandName( |
| SPV_OPERAND_TYPE_BUILT_IN, |
| decoration.params()[0]) |
| << " variable needs to be a 32-bit float array. " |
| << message; |
| })) { |
| return error; |
| } |
| break; |
| } |
| case spv::ExecutionModel::TessellationControl: |
| case spv::ExecutionModel::TessellationEvaluation: |
| case spv::ExecutionModel::Geometry: |
| case spv::ExecutionModel::MeshNV: |
| case spv::ExecutionModel::MeshEXT: { |
| if (decoration.struct_member_index() != Decoration::kInvalidMember) { |
| // The outer level of array is applied on the variable. |
| if (spv_result_t error = ValidateF32Arr( |
| decoration, built_in_inst, /* Any number of components */ 0, |
| [this, &decoration, &referenced_from_inst]( |
| const std::string& message) -> spv_result_t { |
| uint32_t vuid = |
| (spv::BuiltIn(decoration.params()[0]) == spv::BuiltIn::ClipDistance) |
| ? 4191 |
| : 4200; |
| return _.diag(SPV_ERROR_INVALID_DATA, |
| &referenced_from_inst) |
| << _.VkErrorID(vuid) |
| << "According to the Vulkan spec BuiltIn " |
| << _.grammar().lookupOperandName( |
| SPV_OPERAND_TYPE_BUILT_IN, |
| decoration.params()[0]) |
| << " variable needs to be a 32-bit float array. " |
| << message; |
| })) { |
| return error; |
| } |
| } else { |
| if (spv_result_t error = ValidateOptionalArrayedF32Arr( |
| decoration, built_in_inst, /* Any number of components */ 0, |
| [this, &decoration, &referenced_from_inst]( |
| const std::string& message) -> spv_result_t { |
| uint32_t vuid = |
| (spv::BuiltIn(decoration.params()[0]) == spv::BuiltIn::ClipDistance) |
| ? 4191 |
| : 4200; |
| return _.diag(SPV_ERROR_INVALID_DATA, |
| &referenced_from_inst) |
| << _.VkErrorID(vuid) |
| << "According to the Vulkan spec BuiltIn " |
| << _.grammar().lookupOperandName( |
| SPV_OPERAND_TYPE_BUILT_IN, |
| decoration.params()[0]) |
| << " variable needs to be a 32-bit float array. " |
| << message; |
| })) { |
| return error; |
| } |
| } |
| break; |
| } |
| |
| default: { |
| uint32_t vuid = |
| (spv::BuiltIn(decoration.params()[0]) == spv::BuiltIn::ClipDistance) ? 4187 : 4196; |
| return _.diag(SPV_ERROR_INVALID_DATA, &referenced_from_inst) |
| << _.VkErrorID(vuid) << "Vulkan spec allows BuiltIn " |
| << _.grammar().lookupOperandName(SPV_OPERAND_TYPE_BUILT_IN, |
| operand) |
| << " to be used only with Fragment, Vertex, " |
| "TessellationControl, TessellationEvaluation or Geometry " |
| "execution models. " |
| << GetReferenceDesc(decoration, built_in_inst, referenced_inst, |
| referenced_from_inst, execution_model); |
| } |
| } |
| } |
| } |
| |
| if (function_id_ == 0) { |
| // Propagate this rule to all dependant ids in the global scope. |
| id_to_at_reference_checks_[referenced_from_inst.id()].push_back( |
| std::bind(&BuiltInsValidator::ValidateClipOrCullDistanceAtReference, |
| this, decoration, built_in_inst, referenced_from_inst, |
| std::placeholders::_1)); |
| } |
| |
| return SPV_SUCCESS; |
| } |
| |
| spv_result_t BuiltInsValidator::ValidateFragCoordAtDefinition( |
| const Decoration& decoration, const Instruction& inst) { |
| if (spvIsVulkanEnv(_.context()->target_env)) { |
| if (spv_result_t error = ValidateF32Vec( |
| decoration, inst, 4, |
| [this, &inst](const std::string& message) -> spv_result_t { |
| return _.diag(SPV_ERROR_INVALID_DATA, &inst) |
| << _.VkErrorID(4212) << "According to the " |
| << spvLogStringForEnv(_.context()->target_env) |
| << " spec BuiltIn FragCoord " |
| "variable needs to be a 4-component 32-bit float " |
| "vector. " |
| << message; |
| })) { |
| return error; |
| } |
| } |
| |
| // Seed at reference checks with this built-in. |
| return ValidateFragCoordAtReference(decoration, inst, inst, inst); |
| } |
| |
| spv_result_t BuiltInsValidator::ValidateFragCoordAtReference( |
| const Decoration& decoration, const Instruction& built_in_inst, |
| const Instruction& referenced_inst, |
| const Instruction& referenced_from_inst) { |
| if (spvIsVulkanEnv(_.context()->target_env)) { |
| const spv::StorageClass storage_class = GetStorageClass(referenced_from_inst); |
| if (storage_class != spv::StorageClass::Max && |
| storage_class != spv::StorageClass::Input) { |
| return _.diag(SPV_ERROR_INVALID_DATA, &referenced_from_inst) |
| << _.VkErrorID(4211) << spvLogStringForEnv(_.context()->target_env) |
| << " spec allows BuiltIn FragCoord to be only used for " |
| "variables with Input storage class. " |
| << GetReferenceDesc(decoration, built_in_inst, referenced_inst, |
| referenced_from_inst) |
| << " " << GetStorageClassDesc(referenced_from_inst); |
| } |
| |
| for (const spv::ExecutionModel execution_model : execution_models_) { |
| if (execution_model != spv::ExecutionModel::Fragment) { |
| return _.diag(SPV_ERROR_INVALID_DATA, &referenced_from_inst) |
| << _.VkErrorID(4210) |
| << spvLogStringForEnv(_.context()->target_env) |
| << " spec allows BuiltIn FragCoord to be used only with " |
| "Fragment execution model. " |
| << GetReferenceDesc(decoration, built_in_inst, referenced_inst, |
| referenced_from_inst, execution_model); |
| } |
| } |
| } |
| |
| if (function_id_ == 0) { |
| // Propagate this rule to all dependant ids in the global scope. |
| id_to_at_reference_checks_[referenced_from_inst.id()].push_back(std::bind( |
| &BuiltInsValidator::ValidateFragCoordAtReference, this, decoration, |
| built_in_inst, referenced_from_inst, std::placeholders::_1)); |
| } |
| |
| return SPV_SUCCESS; |
| } |
| |
| spv_result_t BuiltInsValidator::ValidateFragDepthAtDefinition( |
| const Decoration& decoration, const Instruction& inst) { |
| if (spvIsVulkanEnv(_.context()->target_env)) { |
| if (spv_result_t error = ValidateF32( |
| decoration, inst, |
| [this, &inst](const std::string& message) -> spv_result_t { |
| return _.diag(SPV_ERROR_INVALID_DATA, &inst) |
| << _.VkErrorID(4215) << "According to the " |
| << spvLogStringForEnv(_.context()->target_env) |
| << " spec BuiltIn FragDepth " |
| "variable needs to be a 32-bit float scalar. " |
| << message; |
| })) { |
| return error; |
| } |
| } |
| |
| // Seed at reference checks with this built-in. |
| return ValidateFragDepthAtReference(decoration, inst, inst, inst); |
| } |
| |
| spv_result_t BuiltInsValidator::ValidateFragDepthAtReference( |
| const Decoration& decoration, const Instruction& built_in_inst, |
| const Instruction& referenced_inst, |
| const Instruction& referenced_from_inst) { |
| if (spvIsVulkanEnv(_.context()->target_env)) { |
| const spv::StorageClass storage_class = GetStorageClass(referenced_from_inst); |
| if (storage_class != spv::StorageClass::Max && |
| storage_class != spv::StorageClass::Output) { |
| return _.diag(SPV_ERROR_INVALID_DATA, &referenced_from_inst) |
| << _.VkErrorID(4214) << spvLogStringForEnv(_.context()->target_env) |
| << " spec allows BuiltIn FragDepth to be only used for " |
| "variables with Output storage class. " |
| << GetReferenceDesc(decoration, built_in_inst, referenced_inst, |
| referenced_from_inst) |
| << " " << GetStorageClassDesc(referenced_from_inst); |
| } |
| |
| for (const spv::ExecutionModel execution_model : execution_models_) { |
| if (execution_model != spv::ExecutionModel::Fragment) { |
| return _.diag(SPV_ERROR_INVALID_DATA, &referenced_from_inst) |
| << _.VkErrorID(4213) |
| << spvLogStringForEnv(_.context()->target_env) |
| << " spec allows BuiltIn FragDepth to be used only with " |
| "Fragment execution model. " |
| << GetReferenceDesc(decoration, built_in_inst, referenced_inst, |
| referenced_from_inst, execution_model); |
| } |
| } |
| |
| for (const uint32_t entry_point : *entry_points_) { |
| // Every entry point from which this function is called needs to have |
| // Execution Mode DepthReplacing. |
| const auto* modes = _.GetExecutionModes(entry_point); |
| if (!modes || !modes->count(spv::ExecutionMode::DepthReplacing)) { |
| return _.diag(SPV_ERROR_INVALID_DATA, &referenced_from_inst) |
| << _.VkErrorID(4216) |
| << spvLogStringForEnv(_.context()->target_env) |
| << " spec requires DepthReplacing execution mode to be " |
| "declared when using BuiltIn FragDepth. " |
| << GetReferenceDesc(decoration, built_in_inst, referenced_inst, |
| referenced_from_inst); |
| } |
| } |
| } |
| |
| if (function_id_ == 0) { |
| // Propagate this rule to all dependant ids in the global scope. |
| id_to_at_reference_checks_[referenced_from_inst.id()].push_back(std::bind( |
| &BuiltInsValidator::ValidateFragDepthAtReference, this, decoration, |
| built_in_inst, referenced_from_inst, std::placeholders::_1)); |
| } |
| |
| return SPV_SUCCESS; |
| } |
| |
| spv_result_t BuiltInsValidator::ValidateFrontFacingAtDefinition( |
| const Decoration& decoration, const Instruction& inst) { |
| if (spvIsVulkanEnv(_.context()->target_env)) { |
| if (spv_result_t error = ValidateBool( |
| decoration, inst, |
| [this, &inst](const std::string& message) -> spv_result_t { |
| return _.diag(SPV_ERROR_INVALID_DATA, &inst) |
| << _.VkErrorID(4231) << "According to the " |
| << spvLogStringForEnv(_.context()->target_env) |
| << " spec BuiltIn FrontFacing " |
| "variable needs to be a bool scalar. " |
| << message; |
| })) { |
| return error; |
| } |
| } |
| |
| // Seed at reference checks with this built-in. |
| return ValidateFrontFacingAtReference(decoration, inst, inst, inst); |
| } |
| |
| spv_result_t BuiltInsValidator::ValidateFrontFacingAtReference( |
| const Decoration& decoration, const Instruction& built_in_inst, |
| const Instruction& referenced_inst, |
| const Instruction& referenced_from_inst) { |
| if (spvIsVulkanEnv(_.context()->target_env)) { |
| const spv::StorageClass storage_class = GetStorageClass(referenced_from_inst); |
| if (storage_class != spv::StorageClass::Max && |
| storage_class != spv::StorageClass::Input) { |
| return _.diag(SPV_ERROR_INVALID_DATA, &referenced_from_inst) |
| << _.VkErrorID(4230) << spvLogStringForEnv(_.context()->target_env) |
| << " spec allows BuiltIn FrontFacing to be only used for " |
| "variables with Input storage class. " |
| << GetReferenceDesc(decoration, built_in_inst, referenced_inst, |
| referenced_from_inst) |
| << " " << GetStorageClassDesc(referenced_from_inst); |
| } |
| |
| for (const spv::ExecutionModel execution_model : execution_models_) { |
| if (execution_model != spv::ExecutionModel::Fragment) { |
| return _.diag(SPV_ERROR_INVALID_DATA, &referenced_from_inst) |
| << _.VkErrorID(4229) |
| << spvLogStringForEnv(_.context()->target_env) |
| << " spec allows BuiltIn FrontFacing to be used only with " |
| "Fragment execution model. " |
| << GetReferenceDesc(decoration, built_in_inst, referenced_inst, |
| referenced_from_inst, execution_model); |
| } |
| } |
| } |
| |
| if (function_id_ == 0) { |
| // Propagate this rule to all dependant ids in the global scope. |
| id_to_at_reference_checks_[referenced_from_inst.id()].push_back(std::bind( |
| &BuiltInsValidator::ValidateFrontFacingAtReference, this, decoration, |
| built_in_inst, referenced_from_inst, std::placeholders::_1)); |
| } |
| |
| return SPV_SUCCESS; |
| } |
| |
| spv_result_t BuiltInsValidator::ValidateHelperInvocationAtDefinition( |
| const Decoration& decoration, const Instruction& inst) { |
| if (spvIsVulkanEnv(_.context()->target_env)) { |
| if (spv_result_t error = ValidateBool( |
| decoration, inst, |
| [this, &inst](const std::string& message) -> spv_result_t { |
| return _.diag(SPV_ERROR_INVALID_DATA, &inst) |
| << _.VkErrorID(4241) |
| << "According to the Vulkan spec BuiltIn HelperInvocation " |
| "variable needs to be a bool scalar. " |
| << message; |
| })) { |
| return error; |
| } |
| } |
| |
| // Seed at reference checks with this built-in. |
| return ValidateHelperInvocationAtReference(decoration, inst, inst, inst); |
| } |
| |
| spv_result_t BuiltInsValidator::ValidateHelperInvocationAtReference( |
| const Decoration& decoration, const Instruction& built_in_inst, |
| const Instruction& referenced_inst, |
| const Instruction& referenced_from_inst) { |
| if (spvIsVulkanEnv(_.context()->target_env)) { |
| const spv::StorageClass storage_class = GetStorageClass(referenced_from_inst); |
| if (storage_class != spv::StorageClass::Max && |
| storage_class != spv::StorageClass::Input) { |
| return _.diag(SPV_ERROR_INVALID_DATA, &referenced_from_inst) |
| << _.VkErrorID(4240) |
| << "Vulkan spec allows BuiltIn HelperInvocation to be only used " |
| "for variables with Input storage class. " |
| << GetReferenceDesc(decoration, built_in_inst, referenced_inst, |
| referenced_from_inst) |
| << " " << GetStorageClassDesc(referenced_from_inst); |
| } |
| |
| for (const spv::ExecutionModel execution_model : execution_models_) { |
| if (execution_model != spv::ExecutionModel::Fragment) { |
| return _.diag(SPV_ERROR_INVALID_DATA, &referenced_from_inst) |
| << _.VkErrorID(4239) |
| << "Vulkan spec allows BuiltIn HelperInvocation to be used only " |
| "with Fragment execution model. " |
| << GetReferenceDesc(decoration, built_in_inst, referenced_inst, |
| referenced_from_inst, execution_model); |
| } |
| } |
| } |
| |
| if (function_id_ == 0) { |
| // Propagate this rule to all dependant ids in the global scope. |
| id_to_at_reference_checks_[referenced_from_inst.id()].push_back( |
| std::bind(&BuiltInsValidator::ValidateHelperInvocationAtReference, this, |
| decoration, built_in_inst, referenced_from_inst, |
| std::placeholders::_1)); |
| } |
| |
| return SPV_SUCCESS; |
| } |
| |
| spv_result_t BuiltInsValidator::ValidateInvocationIdAtDefinition( |
| const Decoration& decoration, const Instruction& inst) { |
| if (spvIsVulkanEnv(_.context()->target_env)) { |
| if (spv_result_t error = ValidateI32( |
| decoration, inst, |
| [this, &inst](const std::string& message) -> spv_result_t { |
| return _.diag(SPV_ERROR_INVALID_DATA, &inst) |
| << _.VkErrorID(4259) |
| << "According to the Vulkan spec BuiltIn InvocationId " |
| "variable needs to be a 32-bit int scalar. " |
| << message; |
| })) { |
| return error; |
| } |
| } |
| |
| // Seed at reference checks with this built-in. |
| return ValidateInvocationIdAtReference(decoration, inst, inst, inst); |
| } |
| |
| spv_result_t BuiltInsValidator::ValidateInvocationIdAtReference( |
| const Decoration& decoration, const Instruction& built_in_inst, |
| const Instruction& referenced_inst, |
| const Instruction& referenced_from_inst) { |
| if (spvIsVulkanEnv(_.context()->target_env)) { |
| const spv::StorageClass storage_class = GetStorageClass(referenced_from_inst); |
| if (storage_class != spv::StorageClass::Max && |
| storage_class != spv::StorageClass::Input) { |
| return _.diag(SPV_ERROR_INVALID_DATA, &referenced_from_inst) |
| << _.VkErrorID(4258) |
| << "Vulkan spec allows BuiltIn InvocationId to be only used for " |
| "variables with Input storage class. " |
| << GetReferenceDesc(decoration, built_in_inst, referenced_inst, |
| referenced_from_inst) |
| << " " << GetStorageClassDesc(referenced_from_inst); |
| } |
| |
| for (const spv::ExecutionModel execution_model : execution_models_) { |
| if (execution_model != spv::ExecutionModel::TessellationControl && |
| execution_model != spv::ExecutionModel::Geometry) { |
| return _.diag(SPV_ERROR_INVALID_DATA, &referenced_from_inst) |
| << _.VkErrorID(4257) |
| << "Vulkan spec allows BuiltIn InvocationId to be used only " |
| "with TessellationControl or Geometry execution models. " |
| << GetReferenceDesc(decoration, built_in_inst, referenced_inst, |
| referenced_from_inst, execution_model); |
| } |
| } |
| } |
| |
| if (function_id_ == 0) { |
| // Propagate this rule to all dependant ids in the global scope. |
| id_to_at_reference_checks_[referenced_from_inst.id()].push_back(std::bind( |
| &BuiltInsValidator::ValidateInvocationIdAtReference, this, decoration, |
| built_in_inst, referenced_from_inst, std::placeholders::_1)); |
| } |
| |
| return SPV_SUCCESS; |
| } |
| |
| spv_result_t BuiltInsValidator::ValidateInstanceIndexAtDefinition( |
| const Decoration& decoration, const Instruction& inst) { |
| if (spvIsVulkanEnv(_.context()->target_env)) { |
| if (spv_result_t error = ValidateI32( |
| decoration, inst, |
| [this, &inst](const std::string& message) -> spv_result_t { |
| return _.diag(SPV_ERROR_INVALID_DATA, &inst) |
| << _.VkErrorID(4265) << "According to the " |
| << spvLogStringForEnv(_.context()->target_env) |
| << " spec BuiltIn InstanceIndex " |
| "variable needs to be a 32-bit int scalar. " |
| << message; |
| })) { |
| return error; |
| } |
| } |
| |
| // Seed at reference checks with this built-in. |
| return ValidateInstanceIndexAtReference(decoration, inst, inst, inst); |
| } |
| |
| spv_result_t BuiltInsValidator::ValidateInstanceIndexAtReference( |
| const Decoration& decoration, const Instruction& built_in_inst, |
| const Instruction& referenced_inst, |
| const Instruction& referenced_from_inst) { |
| if (spvIsVulkanEnv(_.context()->target_env)) { |
| const spv::StorageClass storage_class = GetStorageClass(referenced_from_inst); |
| if (storage_class != spv::StorageClass::Max && |
| storage_class != spv::StorageClass::Input) { |
| return _.diag(SPV_ERROR_INVALID_DATA, &referenced_from_inst) |
| << _.VkErrorID(4264) << spvLogStringForEnv(_.context()->target_env) |
| << " spec allows BuiltIn InstanceIndex to be only used for " |
| "variables with Input storage class. " |
| << GetReferenceDesc(decoration, built_in_inst, referenced_inst, |
| referenced_from_inst) |
| << " " << GetStorageClassDesc(referenced_from_inst); |
| } |
| |
| for (const spv::ExecutionModel execution_model : execution_models_) { |
| if (execution_model != spv::ExecutionModel::Vertex) { |
| return _.diag(SPV_ERROR_INVALID_DATA, &referenced_from_inst) |
| << _.VkErrorID(4263) |
| << spvLogStringForEnv(_.context()->target_env) |
| << " spec allows BuiltIn InstanceIndex to be used only " |
| "with Vertex execution model. " |
| << GetReferenceDesc(decoration, built_in_inst, referenced_inst, |
| referenced_from_inst, execution_model); |
| } |
| } |
| } |
| |
| if (function_id_ == 0) { |
| // Propagate this rule to all dependant ids in the global scope. |
| id_to_at_reference_checks_[referenced_from_inst.id()].push_back(std::bind( |
| &BuiltInsValidator::ValidateInstanceIndexAtReference, this, decoration, |
| built_in_inst, referenced_from_inst, std::placeholders::_1)); |
| } |
| |
| return SPV_SUCCESS; |
| } |
| |
| spv_result_t BuiltInsValidator::ValidatePatchVerticesAtDefinition( |
| const Decoration& decoration, const Instruction& inst) { |
| if (spvIsVulkanEnv(_.context()->target_env)) { |
| if (spv_result_t error = ValidateI32( |
| decoration, inst, |
| [this, &inst](const std::string& message) -> spv_result_t { |
| return _.diag(SPV_ERROR_INVALID_DATA, &inst) |
| << _.VkErrorID(4310) |
| << "According to the Vulkan spec BuiltIn PatchVertices " |
| "variable needs to be a 32-bit int scalar. " |
| << message; |
| })) { |
| return error; |
| } |
| } |
| |
| // Seed at reference checks with this built-in. |
| return ValidatePatchVerticesAtReference(decoration, inst, inst, inst); |
| } |
| |
| spv_result_t BuiltInsValidator::ValidatePatchVerticesAtReference( |
| const Decoration& decoration, const Instruction& built_in_inst, |
| const Instruction& referenced_inst, |
| const Instruction& referenced_from_inst) { |
| if (spvIsVulkanEnv(_.context()->target_env)) { |
| const spv::StorageClass storage_class = GetStorageClass(referenced_from_inst); |
| if (storage_class != spv::StorageClass::Max && |
| storage_class != spv::StorageClass::Input) { |
| return _.diag(SPV_ERROR_INVALID_DATA, &referenced_from_inst) |
| << _.VkErrorID(4309) |
| << "Vulkan spec allows BuiltIn PatchVertices to be only used for " |
| "variables with Input storage class. " |
| << GetReferenceDesc(decoration, built_in_inst, referenced_inst, |
| referenced_from_inst) |
| << " " << GetStorageClassDesc(referenced_from_inst); |
| } |
| |
| for (const spv::ExecutionModel execution_model : execution_models_) { |
| if (execution_model != spv::ExecutionModel::TessellationControl && |
| execution_model != spv::ExecutionModel::TessellationEvaluation) { |
| return _.diag(SPV_ERROR_INVALID_DATA, &referenced_from_inst) |
| << _.VkErrorID(4308) |
| << "Vulkan spec allows BuiltIn PatchVertices to be used only " |
| "with TessellationControl or TessellationEvaluation " |
| "execution models. " |
| << GetReferenceDesc(decoration, built_in_inst, referenced_inst, |
| referenced_from_inst, execution_model); |
| } |
| } |
| } |
| |
| if (function_id_ == 0) { |
| // Propagate this rule to all dependant ids in the global scope. |
| id_to_at_reference_checks_[referenced_from_inst.id()].push_back(std::bind( |
| &BuiltInsValidator::ValidatePatchVerticesAtReference, this, decoration, |
| built_in_inst, referenced_from_inst, std::placeholders::_1)); |
| } |
| |
| return SPV_SUCCESS; |
| } |
| |
| spv_result_t BuiltInsValidator::ValidatePointCoordAtDefinition( |
| const Decoration& decoration, const Instruction& inst) { |
| if (spvIsVulkanEnv(_.context()->target_env)) { |
| if (spv_result_t error = ValidateF32Vec( |
| decoration, inst, 2, |
| [this, &inst](const std::string& message) -> spv_result_t { |
| return _.diag(SPV_ERROR_INVALID_DATA, &inst) |
| << _.VkErrorID(4313) |
| << "According to the Vulkan spec BuiltIn PointCoord " |
| "variable needs to be a 2-component 32-bit float " |
| "vector. " |
| << message; |
| })) { |
| return error; |
| } |
| } |
| |
| // Seed at reference checks with this built-in. |
| return ValidatePointCoordAtReference(decoration, inst, inst, inst); |
| } |
| |
| spv_result_t BuiltInsValidator::ValidatePointCoordAtReference( |
| const Decoration& decoration, const Instruction& built_in_inst, |
| const Instruction& referenced_inst, |
| const Instruction& referenced_from_inst) { |
| if (spvIsVulkanEnv(_.context()->target_env)) { |
| const spv::StorageClass storage_class = GetStorageClass(referenced_from_inst); |
| if (storage_class != spv::StorageClass::Max && |
| storage_class != spv::StorageClass::Input) { |
| return _.diag(SPV_ERROR_INVALID_DATA, &referenced_from_inst) |
| << _.VkErrorID(4312) |
| << "Vulkan spec allows BuiltIn PointCoord to be only used for " |
| "variables with Input storage class. " |
| << GetReferenceDesc(decoration, built_in_inst, referenced_inst, |
| referenced_from_inst) |
| << " " << GetStorageClassDesc(referenced_from_inst); |
| } |
| |
| for (const spv::ExecutionModel execution_model : execution_models_) { |
| if (execution_model != spv::ExecutionModel::Fragment) { |
| return _.diag(SPV_ERROR_INVALID_DATA, &referenced_from_inst) |
| << _.VkErrorID(4311) |
| << "Vulkan spec allows BuiltIn PointCoord to be used only with " |
| "Fragment execution model. " |
| << GetReferenceDesc(decoration, built_in_inst, referenced_inst, |
| referenced_from_inst, execution_model); |
| } |
| } |
| } |
| |
| if (function_id_ == 0) { |
| // Propagate this rule to all dependant ids in the global scope. |
| id_to_at_reference_checks_[referenced_from_inst.id()].push_back(std::bind( |
| &BuiltInsValidator::ValidatePointCoordAtReference, this, decoration, |
| built_in_inst, referenced_from_inst, std::placeholders::_1)); |
| } |
| |
| return SPV_SUCCESS; |
| } |
| |
| spv_result_t BuiltInsValidator::ValidatePointSizeAtDefinition( |
| const Decoration& decoration, const Instruction& inst) { |
| // Seed at reference checks with this built-in. |
| return ValidatePointSizeAtReference(decoration, inst, inst, inst); |
| } |
| |
| spv_result_t BuiltInsValidator::ValidatePointSizeAtReference( |
| const Decoration& decoration, const Instruction& built_in_inst, |
| const Instruction& referenced_inst, |
| const Instruction& referenced_from_inst) { |
| if (spvIsVulkanEnv(_.context()->target_env)) { |
| const spv::StorageClass storage_class = GetStorageClass(referenced_from_inst); |
| if (storage_class != spv::StorageClass::Max && |
| storage_class != spv::StorageClass::Input && |
| storage_class != spv::StorageClass::Output) { |
| return _.diag(SPV_ERROR_INVALID_DATA, &referenced_from_inst) |
| << _.VkErrorID(4316) |
| << "Vulkan spec allows BuiltIn PointSize to be only used for " |
| "variables with Input or Output storage class. " |
| << GetReferenceDesc(decoration, built_in_inst, referenced_inst, |
| referenced_from_inst) |
| << " " << GetStorageClassDesc(referenced_from_inst); |
| } |
| |
| if (storage_class == spv::StorageClass::Input) { |
| assert(function_id_ == 0); |
| id_to_at_reference_checks_[referenced_from_inst.id()].push_back(std::bind( |
| &BuiltInsValidator::ValidateNotCalledWithExecutionModel, this, 4315, |
| "Vulkan spec doesn't allow BuiltIn PointSize to be used for " |
| "variables with Input storage class if execution model is " |
| "Vertex.", |
| spv::ExecutionModel::Vertex, decoration, built_in_inst, |
| referenced_from_inst, std::placeholders::_1)); |
| } |
| |
| for (const spv::ExecutionModel execution_model : execution_models_) { |
| switch (execution_model) { |
| case spv::ExecutionModel::Vertex: { |
| if (spv_result_t error = ValidateF32( |
| decoration, built_in_inst, |
| [this, &referenced_from_inst]( |
| const std::string& message) -> spv_result_t { |
| return _.diag(SPV_ERROR_INVALID_DATA, &referenced_from_inst) |
| << _.VkErrorID(4317) |
| << "According to the Vulkan spec BuiltIn PointSize " |
| "variable needs to be a 32-bit float scalar. " |
| << message; |
| })) { |
| return error; |
| } |
| break; |
| } |
| case spv::ExecutionModel::TessellationControl: |
| case spv::ExecutionModel::TessellationEvaluation: |
| case spv::ExecutionModel::Geometry: |
| case spv::ExecutionModel::MeshNV: |
| case spv::ExecutionModel::MeshEXT: { |
| // PointSize can be a per-vertex variable for tessellation control, |
| // tessellation evaluation and geometry shader stages. In such cases |
| // variables will have an array of 32-bit floats. |
| if (decoration.struct_member_index() != Decoration::kInvalidMember) { |
| // The array is on the variable, so this must be a 32-bit float. |
| if (spv_result_t error = ValidateF32( |
| decoration, built_in_inst, |
| [this, &referenced_from_inst]( |
| const std::string& message) -> spv_result_t { |
| return _.diag(SPV_ERROR_INVALID_DATA, |
| &referenced_from_inst) |
| << _.VkErrorID(4317) |
| << "According to the Vulkan spec BuiltIn " |
| "PointSize variable needs to be a 32-bit " |
| "float scalar. " |
| << message; |
| })) { |
| return error; |
| } |
| } else { |
| if (spv_result_t error = ValidateOptionalArrayedF32( |
| decoration, built_in_inst, |
| [this, &referenced_from_inst]( |
| const std::string& message) -> spv_result_t { |
| return _.diag(SPV_ERROR_INVALID_DATA, |
| &referenced_from_inst) |
| << _.VkErrorID(4317) |
| << "According to the Vulkan spec BuiltIn " |
| "PointSize variable needs to be a 32-bit " |
| "float scalar. " |
| << message; |
| })) { |
| return error; |
| } |
| } |
| break; |
| } |
| |
| default: { |
| return _.diag(SPV_ERROR_INVALID_DATA, &referenced_from_inst) |
| << _.VkErrorID(4314) |
| << "Vulkan spec allows BuiltIn PointSize to be used only with " |
| "Vertex, TessellationControl, TessellationEvaluation or " |
| "Geometry execution models. " |
| << GetReferenceDesc(decoration, built_in_inst, referenced_inst, |
| referenced_from_inst, execution_model); |
| } |
| } |
| } |
| } |
| |
| if (function_id_ == 0) { |
| // Propagate this rule to all dependant ids in the global scope. |
| id_to_at_reference_checks_[referenced_from_inst.id()].push_back(std::bind( |
| &BuiltInsValidator::ValidatePointSizeAtReference, this, decoration, |
| built_in_inst, referenced_from_inst, std::placeholders::_1)); |
| } |
| |
| return SPV_SUCCESS; |
| } |
| |
| spv_result_t BuiltInsValidator::ValidatePositionAtDefinition( |
| const Decoration& decoration, const Instruction& inst) { |
| // Seed at reference checks with this built-in. |
| return ValidatePositionAtReference(decoration, inst, inst, inst); |
| } |
| |
| spv_result_t BuiltInsValidator::ValidatePositionAtReference( |
| const Decoration& decoration, const Instruction& built_in_inst, |
| const Instruction& referenced_inst, |
| const Instruction& referenced_from_inst) { |
| if (spvIsVulkanEnv(_.context()->target_env)) { |
| const spv::StorageClass storage_class = GetStorageClass(referenced_from_inst); |
| if (storage_class != spv::StorageClass::Max && |
| storage_class != spv::StorageClass::Input && |
| storage_class != spv::StorageClass::Output) { |
| return _.diag(SPV_ERROR_INVALID_DATA, &referenced_from_inst) |
| << _.VkErrorID(4320) << "Vulkan spec allows BuiltIn Position to be only used for " |
| "variables with Input or Output storage class. " |
| << GetReferenceDesc(decoration, built_in_inst, referenced_inst, |
| referenced_from_inst) |
| << " " << GetStorageClassDesc(referenced_from_inst); |
| } |
| |
| if (storage_class == spv::StorageClass::Input) { |
| assert(function_id_ == 0); |
| id_to_at_reference_checks_[referenced_from_inst.id()].push_back(std::bind( |
| &BuiltInsValidator::ValidateNotCalledWithExecutionModel, this, 4319, |
| "Vulkan spec doesn't allow BuiltIn Position to be used " |
| "for variables " |
| "with Input storage class if execution model is Vertex.", |
| spv::ExecutionModel::Vertex, decoration, built_in_inst, |
| referenced_from_inst, std::placeholders::_1)); |
| id_to_at_reference_checks_[referenced_from_inst.id()].push_back(std::bind( |
| &BuiltInsValidator::ValidateNotCalledWithExecutionModel, this, 4319, |
| "Vulkan spec doesn't allow BuiltIn Position to be used " |
| "for variables " |
| "with Input storage class if execution model is MeshNV.", |
| spv::ExecutionModel::MeshNV, decoration, built_in_inst, |
| referenced_from_inst, std::placeholders::_1)); |
| id_to_at_reference_checks_[referenced_from_inst.id()].push_back(std::bind( |
| &BuiltInsValidator::ValidateNotCalledWithExecutionModel, this, 4319, |
| "Vulkan spec doesn't allow BuiltIn Position to be used " |
| "for variables " |
| "with Input storage class if execution model is MeshEXT.", |
| spv::ExecutionModel::MeshEXT, decoration, built_in_inst, |
| referenced_from_inst, std::placeholders::_1)); |
| } |
| |
| for (const spv::ExecutionModel execution_model : execution_models_) { |
| switch (execution_model) { |
| case spv::ExecutionModel::Vertex: { |
| if (spv_result_t error = ValidateF32Vec( |
| decoration, built_in_inst, 4, |
| [this, &referenced_from_inst]( |
| const std::string& message) -> spv_result_t { |
| return _.diag(SPV_ERROR_INVALID_DATA, &referenced_from_inst) |
| << _.VkErrorID(4321) |
| << "According to the Vulkan spec BuiltIn Position " |
| "variable needs to be a 4-component 32-bit float " |
| "vector. " |
| << message; |
| })) { |
| return error; |
| } |
| break; |
| } |
| case spv::ExecutionModel::Geometry: |
| case spv::ExecutionModel::TessellationControl: |
| case spv::ExecutionModel::TessellationEvaluation: |
| case spv::ExecutionModel::MeshNV: |
| case spv::ExecutionModel::MeshEXT: { |
| // Position can be a per-vertex variable for tessellation control, |
| // tessellation evaluation, geometry and mesh shader stages. In such |
| // cases variables will have an array of 4-component 32-bit float |
| // vectors. |
| if (decoration.struct_member_index() != Decoration::kInvalidMember) { |
| // The array is on the variable, so this must be a 4-component |
| // 32-bit float vector. |
| if (spv_result_t error = ValidateF32Vec( |
| decoration, built_in_inst, 4, |
| [this, &referenced_from_inst]( |
| const std::string& message) -> spv_result_t { |
| return _.diag(SPV_ERROR_INVALID_DATA, |
| &referenced_from_inst) |
| << _.VkErrorID(4321) |
| << "According to the Vulkan spec BuiltIn Position " |
| "variable needs to be a 4-component 32-bit " |
| "float vector. " |
| << message; |
| })) { |
| return error; |
| } |
| } else { |
| if (spv_result_t error = ValidateOptionalArrayedF32Vec( |
| decoration, built_in_inst, 4, |
| [this, &referenced_from_inst]( |
| const std::string& message) -> spv_result_t { |
| return _.diag(SPV_ERROR_INVALID_DATA, |
| &referenced_from_inst) |
| << _.VkErrorID(4321) |
| << "According to the Vulkan spec BuiltIn Position " |
| "variable needs to be a 4-component 32-bit " |
| "float vector. " |
| << message; |
| })) { |
| return error; |
| } |
| } |
| break; |
| } |
| |
| default: { |
| return _.diag(SPV_ERROR_INVALID_DATA, &referenced_from_inst) |
| << _.VkErrorID(4318) |
| << "Vulkan spec allows BuiltIn Position to be used only " |
| "with Vertex, TessellationControl, TessellationEvaluation" |
| " or Geometry execution models. " |
| << GetReferenceDesc(decoration, built_in_inst, referenced_inst, |
| referenced_from_inst, execution_model); |
| } |
| } |
| } |
| } |
| |
| if (function_id_ == 0) { |
| // Propagate this rule to all dependant ids in the global scope. |
| id_to_at_reference_checks_[referenced_from_inst.id()].push_back(std::bind( |
| &BuiltInsValidator::ValidatePositionAtReference, this, decoration, |
| built_in_inst, referenced_from_inst, std::placeholders::_1)); |
| } |
| |
| return SPV_SUCCESS; |
| } |
| |
| spv_result_t BuiltInsValidator::ValidatePrimitiveIdAtDefinition( |
| const Decoration& decoration, const Instruction& inst) { |
| if (spvIsVulkanEnv(_.context()->target_env)) { |
| // PrimitiveId can be a per-primitive variable for mesh shader stage. |
| // In such cases variable will have an array of 32-bit integers. |
| if (decoration.struct_member_index() != Decoration::kInvalidMember) { |
| // This must be a 32-bit int scalar. |
| if (spv_result_t error = ValidateI32( |
| decoration, inst, |
| [this, &inst](const std::string& message) -> spv_result_t { |
| return _.diag(SPV_ERROR_INVALID_DATA, &inst) |
| << _.VkErrorID(4337) |
| << "According to the Vulkan spec BuiltIn PrimitiveId " |
| "variable needs to be a 32-bit int scalar. " |
| << message; |
| })) { |
| return error; |
| } |
| } else { |
| if (spv_result_t error = ValidateOptionalArrayedI32( |
| decoration, inst, |
| [this, &inst](const std::string& message) -> spv_result_t { |
| return _.diag(SPV_ERROR_INVALID_DATA, &inst) |
| << _.VkErrorID(4337) |
| << "According to the Vulkan spec BuiltIn PrimitiveId " |
| "variable needs to be a 32-bit int scalar. " |
| << message; |
| })) { |
| return error; |
| } |
| } |
| } |
| |
| // Seed at reference checks with this built-in. |
| return ValidatePrimitiveIdAtReference(decoration, inst, inst, inst); |
| } |
| |
| spv_result_t BuiltInsValidator::ValidatePrimitiveIdAtReference( |
| const Decoration& decoration, const Instruction& built_in_inst, |
| const Instruction& referenced_inst, |
| const Instruction& referenced_from_inst) { |
| if (spvIsVulkanEnv(_.context()->target_env)) { |
| const spv::StorageClass storage_class = GetStorageClass(referenced_from_inst); |
| if (storage_class != spv::StorageClass::Max && |
| storage_class != spv::StorageClass::Input && |
| storage_class != spv::StorageClass::Output) { |
| return _.diag(SPV_ERROR_INVALID_DATA, &referenced_from_inst) |
| << "Vulkan spec allows BuiltIn PrimitiveId to be only used for " |
| "variables with Input or Output storage class. " |
| << GetReferenceDesc(decoration, built_in_inst, referenced_inst, |
| referenced_from_inst) |
| << " " << GetStorageClassDesc(referenced_from_inst); |
| } |
| |
| if (storage_class == spv::StorageClass::Output) { |
| assert(function_id_ == 0); |
| id_to_at_reference_checks_[referenced_from_inst.id()].push_back(std::bind( |
| &BuiltInsValidator::ValidateNotCalledWithExecutionModel, this, 4334, |
| "Vulkan spec doesn't allow BuiltIn PrimitiveId to be used for " |
| "variables with Output storage class if execution model is " |
| "TessellationControl.", |
| spv::ExecutionModel::TessellationControl, decoration, built_in_inst, |
| referenced_from_inst, std::placeholders::_1)); |
| id_to_at_reference_checks_[referenced_from_inst.id()].push_back(std::bind( |
| &BuiltInsValidator::ValidateNotCalledWithExecutionModel, this, 4334, |
| "Vulkan spec doesn't allow BuiltIn PrimitiveId to be used for " |
| "variables with Output storage class if execution model is " |
| "TessellationEvaluation.", |
| spv::ExecutionModel::TessellationEvaluation, decoration, built_in_inst, |
| referenced_from_inst, std::placeholders::_1)); |
| id_to_at_reference_checks_[referenced_from_inst.id()].push_back(std::bind( |
| &BuiltInsValidator::ValidateNotCalledWithExecutionModel, this, 4334, |
| "Vulkan spec doesn't allow BuiltIn PrimitiveId to be used for " |
| "variables with Output storage class if execution model is " |
| "Fragment.", |
| spv::ExecutionModel::Fragment, decoration, built_in_inst, |
| referenced_from_inst, std::placeholders::_1)); |
| id_to_at_reference_checks_[referenced_from_inst.id()].push_back(std::bind( |
| &BuiltInsValidator::ValidateNotCalledWithExecutionModel, this, 4334, |
| "Vulkan spec doesn't allow BuiltIn PrimitiveId to be used for " |
| "variables with Output storage class if execution model is " |
| "IntersectionKHR.", |
| spv::ExecutionModel::IntersectionKHR, decoration, built_in_inst, |
| referenced_from_inst, std::placeholders::_1)); |
| id_to_at_reference_checks_[referenced_from_inst.id()].push_back(std::bind( |
| &BuiltInsValidator::ValidateNotCalledWithExecutionModel, this, 4334, |
| "Vulkan spec doesn't allow BuiltIn PrimitiveId to be used for " |
| "variables with Output storage class if execution model is " |
| "AnyHitKHR.", |
| spv::ExecutionModel::AnyHitKHR, decoration, built_in_inst, |
| referenced_from_inst, std::placeholders::_1)); |
| id_to_at_reference_checks_[referenced_from_inst.id()].push_back(std::bind( |
| &BuiltInsValidator::ValidateNotCalledWithExecutionModel, this, 4334, |
| "Vulkan spec doesn't allow BuiltIn PrimitiveId to be used for " |
| "variables with Output storage class if execution model is " |
| "ClosestHitKHR.", |
| spv::ExecutionModel::ClosestHitKHR, decoration, built_in_inst, |
| referenced_from_inst, std::placeholders::_1)); |
| } |
| |
| for (const spv::ExecutionModel execution_model : execution_models_) { |
| switch (execution_model) { |
| case spv::ExecutionModel::Fragment: |
| case spv::ExecutionModel::TessellationControl: |
| case spv::ExecutionModel::TessellationEvaluation: |
| case spv::ExecutionModel::Geometry: |
| case spv::ExecutionModel::MeshNV: |
| case spv::ExecutionModel::MeshEXT: |
| case spv::ExecutionModel::IntersectionKHR: |
| case spv::ExecutionModel::AnyHitKHR: |
| case spv::ExecutionModel::ClosestHitKHR: { |
| // Ok. |
| break; |
| } |
| |
| default: { |
| return _.diag(SPV_ERROR_INVALID_DATA, &referenced_from_inst) |
| << _.VkErrorID(4330) |
| << "Vulkan spec allows BuiltIn PrimitiveId to be used only " |
| "with Fragment, TessellationControl, " |
| "TessellationEvaluation, Geometry, MeshNV, MeshEXT, " |
| "IntersectionKHR, AnyHitKHR, and ClosestHitKHR execution models. " |
| << GetReferenceDesc(decoration, built_in_inst, referenced_inst, |
| referenced_from_inst, execution_model); |
| } |
| } |
| } |
| } |
| |
| if (function_id_ == 0) { |
| // Propagate this rule to all dependant ids in the global scope. |
| id_to_at_reference_checks_[referenced_from_inst.id()].push_back(std::bind( |
| &BuiltInsValidator::ValidatePrimitiveIdAtReference, this, decoration, |
| built_in_inst, referenced_from_inst, std::placeholders::_1)); |
| } |
| |
| return SPV_SUCCESS; |
| } |
| |
| spv_result_t BuiltInsValidator::ValidateSampleIdAtDefinition( |
| const Decoration& decoration, const Instruction& inst) { |
| if (spvIsVulkanEnv(_.context()->target_env)) { |
| if (spv_result_t error = ValidateI32( |
| decoration, inst, |
| [this, &inst](const std::string& message) -> spv_result_t { |
| return _.diag(SPV_ERROR_INVALID_DATA, &inst) |
| << _.VkErrorID(4356) |
| << "According to the Vulkan spec BuiltIn SampleId " |
| "variable needs to be a 32-bit int scalar. " |
| << message; |
| })) { |
| return error; |
| } |
| } |
| |
| // Seed at reference checks with this built-in. |
| return ValidateSampleIdAtReference(decoration, inst, inst, inst); |
| } |
| |
| spv_result_t BuiltInsValidator::ValidateSampleIdAtReference( |
| const Decoration& decoration, const Instruction& built_in_inst, |
| const Instruction& referenced_inst, |
| const Instruction& referenced_from_inst) { |
| if (spvIsVulkanEnv(_.context()->target_env)) { |
| const spv::StorageClass storage_class = GetStorageClass(referenced_from_inst); |
| if (storage_class != spv::StorageClass::Max && |
| storage_class != spv::StorageClass::Input) { |
| return _.diag(SPV_ERROR_INVALID_DATA, &referenced_from_inst) |
| << _.VkErrorID(4355) |
| << "Vulkan spec allows BuiltIn SampleId to be only used for " |
| "variables with Input storage class. " |
| << GetReferenceDesc(decoration, built_in_inst, referenced_inst, |
| referenced_from_inst) |
| << " " << GetStorageClassDesc(referenced_from_inst); |
| } |
| |
| for (const spv::ExecutionModel execution_model : execution_models_) { |
| if (execution_model != spv::ExecutionModel::Fragment) { |
| return _.diag(SPV_ERROR_INVALID_DATA, &referenced_from_inst) |
| << _.VkErrorID(4354) |
| << "Vulkan spec allows BuiltIn SampleId to be used only with " |
| "Fragment execution model. " |
| << GetReferenceDesc(decoration, built_in_inst, referenced_inst, |
| referenced_from_inst, execution_model); |
| } |
| } |
| } |
| |
| if (function_id_ == 0) { |
| // Propagate this rule to all dependant ids in the global scope. |
| id_to_at_reference_checks_[referenced_from_inst.id()].push_back(std::bind( |
| &BuiltInsValidator::ValidateSampleIdAtReference, this, decoration, |
| built_in_inst, referenced_from_inst, std::placeholders::_1)); |
| } |
| |
| return SPV_SUCCESS; |
| } |
| |
| spv_result_t BuiltInsValidator::ValidateSampleMaskAtDefinition( |
| const Decoration& decoration, const Instruction& inst) { |
| if (spvIsVulkanEnv(_.context()->target_env)) { |
| if (spv_result_t error = ValidateI32Arr( |
| decoration, inst, |
| [this, &inst](const std::string& message) -> spv_result_t { |
| return _.diag(SPV_ERROR_INVALID_DATA, &inst) |
| << _.VkErrorID(4359) |
| << "According to the Vulkan spec BuiltIn SampleMask " |
| "variable needs to be a 32-bit int array. " |
| << message; |
| })) { |
| return error; |
| } |
| } |
| |
| // Seed at reference checks with this built-in. |
| return ValidateSampleMaskAtReference(decoration, inst, inst, inst); |
| } |
| |
| spv_result_t BuiltInsValidator::ValidateSampleMaskAtReference( |
| const Decoration& decoration, const Instruction& built_in_inst, |
| const Instruction& referenced_inst, |
| const Instruction& referenced_from_inst) { |
| if (spvIsVulkanEnv(_.context()->target_env)) { |
| const spv::StorageClass storage_class = GetStorageClass(referenced_from_inst); |
| if (storage_class != spv::StorageClass::Max && |
| storage_class != spv::StorageClass::Input && |
| storage_class != spv::StorageClass::Output) { |
| return _.diag(SPV_ERROR_INVALID_DATA, &referenced_from_inst) |
| << _.VkErrorID(4358) |
| << "Vulkan spec allows BuiltIn SampleMask to be only used for " |
| "variables with Input or Output storage class. " |
| << GetReferenceDesc(decoration, built_in_inst, referenced_inst, |
| referenced_from_inst) |
| << " " << GetStorageClassDesc(referenced_from_inst); |
| } |
| |
| for (const spv::ExecutionModel execution_model : execution_models_) { |
| if (execution_model != spv::ExecutionModel::Fragment) { |
| return _.diag(SPV_ERROR_INVALID_DATA, &referenced_from_inst) |
| << _.VkErrorID(4357) |
| << "Vulkan spec allows BuiltIn SampleMask to be used only " |
| "with " |
| "Fragment execution model. " |
| << GetReferenceDesc(decoration, built_in_inst, referenced_inst, |
| referenced_from_inst, execution_model); |
| } |
| } |
| } |
| |
| if (function_id_ == 0) { |
| // Propagate this rule to all dependant ids in the global scope. |
| id_to_at_reference_checks_[referenced_from_inst.id()].push_back(std::bind( |
| &BuiltInsValidator::ValidateSampleMaskAtReference, this, decoration, |
| built_in_inst, referenced_from_inst, std::placeholders::_1)); |
| } |
| |
| return SPV_SUCCESS; |
| } |
| |
| spv_result_t BuiltInsValidator::ValidateSamplePositionAtDefinition( |
| const Decoration& decoration, const Instruction& inst) { |
| if (spvIsVulkanEnv(_.context()->target_env)) { |
| if (spv_result_t error = ValidateF32Vec( |
| decoration, inst, 2, |
| [this, &inst](const std::string& message) -> spv_result_t { |
| return _.diag(SPV_ERROR_INVALID_DATA, &inst) |
| << _.VkErrorID(4362) |
| << "According to the Vulkan spec BuiltIn SamplePosition " |
| "variable needs to be a 2-component 32-bit float " |
| "vector. " |
| << message; |
| })) { |
| return error; |
| } |
| } |
| |
| // Seed at reference checks with this built-in. |
| return ValidateSamplePositionAtReference(decoration, inst, inst, inst); |
| } |
| |
| spv_result_t BuiltInsValidator::ValidateSamplePositionAtReference( |
| const Decoration& decoration, const Instruction& built_in_inst, |
| const Instruction& referenced_inst, |
| const Instruction& referenced_from_inst) { |
| if (spvIsVulkanEnv(_.context()->target_env)) { |
| const spv::StorageClass storage_class = GetStorageClass(referenced_from_inst); |
| if (storage_class != spv::StorageClass::Max && |
| storage_class != spv::StorageClass::Input) { |
| return _.diag(SPV_ERROR_INVALID_DATA, &referenced_from_inst) |
| << _.VkErrorID(4361) |
| << "Vulkan spec allows BuiltIn SamplePosition to be only used " |
| "for " |
| "variables with Input storage class. " |
| << GetReferenceDesc(decoration, built_in_inst, referenced_inst, |
| referenced_from_inst) |
| << " " << GetStorageClassDesc(referenced_from_inst); |
| } |
| |
| for (const spv::ExecutionModel execution_model : execution_models_) { |
| if (execution_model != spv::ExecutionModel::Fragment) { |
| return _.diag(SPV_ERROR_INVALID_DATA, &referenced_from_inst) |
| << _.VkErrorID(4360) |
| << "Vulkan spec allows BuiltIn SamplePosition to be used only " |
| "with " |
| "Fragment execution model. " |
| << GetReferenceDesc(decoration, built_in_inst, referenced_inst, |
| referenced_from_inst, execution_model); |
| } |
| } |
| } |
| |
| if (function_id_ == 0) { |
| // Propagate this rule to all dependant ids in the global scope. |
| id_to_at_reference_checks_[referenced_from_inst.id()].push_back(std::bind( |
| &BuiltInsValidator::ValidateSamplePositionAtReference, this, decoration, |
| built_in_inst, referenced_from_inst, std::placeholders::_1)); |
| } |
| |
| return SPV_SUCCESS; |
| } |
| |
| spv_result_t BuiltInsValidator::ValidateTessCoordAtDefinition( |
| const Decoration& decoration, const Instruction& inst) { |
| if (spvIsVulkanEnv(_.context()->target_env)) { |
| if (spv_result_t error = ValidateF32Vec( |
| decoration, inst, 3, |
| [this, &inst](const std::string& message) -> spv_result_t { |
| return _.diag(SPV_ERROR_INVALID_DATA, &inst) |
| << _.VkErrorID(4389) |
| << "According to the Vulkan spec BuiltIn TessCoord " |
| "variable needs to be a 3-component 32-bit float " |
| "vector. " |
| << message; |
| })) { |
| return error; |
| } |
| } |
| |
| // Seed at reference checks with this built-in. |
| return ValidateTessCoordAtReference(decoration, inst, inst, inst); |
| } |
| |
| spv_result_t BuiltInsValidator::ValidateTessCoordAtReference( |
| const Decoration& decoration, const Instruction& built_in_inst, |
| const Instruction& referenced_inst, |
| const Instruction& referenced_from_inst) { |
| if (spvIsVulkanEnv(_.context()->target_env)) { |
| const spv::StorageClass storage_class = GetStorageClass(referenced_from_inst); |
| if (storage_class != spv::StorageClass::Max && |
| storage_class != spv::StorageClass::Input) { |
| return _.diag(SPV_ERROR_INVALID_DATA, &referenced_from_inst) |
| << _.VkErrorID(4388) |
| << "Vulkan spec allows BuiltIn TessCoord to be only used for " |
| "variables with Input storage class. " |
| << GetReferenceDesc(decoration, built_in_inst, referenced_inst, |
| referenced_from_inst) |
| << " " << GetStorageClassDesc(referenced_from_inst); |
| } |
| |
| for (const spv::ExecutionModel execution_model : execution_models_) { |
| if (execution_model != spv::ExecutionModel::TessellationEvaluation) { |
| return _.diag(SPV_ERROR_INVALID_DATA, &referenced_from_inst) |
| << _.VkErrorID(4387) |
| << "Vulkan spec allows BuiltIn TessCoord to be used only with " |
| "TessellationEvaluation execution model. " |
| << GetReferenceDesc(decoration, built_in_inst, referenced_inst, |
| referenced_from_inst, execution_model); |
| } |
| } |
| } |
| |
| if (function_id_ == 0) { |
| // Propagate this rule to all dependant ids in the global scope. |
| id_to_at_reference_checks_[referenced_from_inst.id()].push_back(std::bind( |
| &BuiltInsValidator::ValidateTessCoordAtReference, this, decoration, |
| built_in_inst, referenced_from_inst, std::placeholders::_1)); |
| } |
| |
| return SPV_SUCCESS; |
| } |
| |
| spv_result_t BuiltInsValidator::ValidateTessLevelOuterAtDefinition( |
| const Decoration& decoration, const Instruction& inst) { |
| if (spvIsVulkanEnv(_.context()->target_env)) { |
| if (spv_result_t error = ValidateF32Arr( |
| decoration, inst, 4, |
| [this, &inst](const std::string& message) -> spv_result_t { |
| return _.diag(SPV_ERROR_INVALID_DATA, &inst) |
| << _.VkErrorID(4393) |
| << "According to the Vulkan spec BuiltIn TessLevelOuter " |
| "variable needs to be a 4-component 32-bit float " |
| "array. " |
| << message; |
| })) { |
| return error; |
| } |
| } |
| |
| // Seed at reference checks with this built-in. |
| return ValidateTessLevelAtReference(decoration, inst, inst, inst); |
| } |
| |
| spv_result_t BuiltInsValidator::ValidateTessLevelInnerAtDefinition( |
| const Decoration& decoration, const Instruction& inst) { |
| if (spvIsVulkanEnv(_.context()->target_env)) { |
| if (spv_result_t error = ValidateF32Arr( |
| decoration, inst, 2, |
| [this, &inst](const std::string& message) -> spv_result_t { |
| return _.diag(SPV_ERROR_INVALID_DATA, &inst) |
| << _.VkErrorID(4397) |
| << "According to the Vulkan spec BuiltIn TessLevelOuter " |
| "variable needs to be a 2-component 32-bit float " |
| "array. " |
| << message; |
| })) { |
| return error; |
| } |
| } |
| |
| // Seed at reference checks with this built-in. |
| return ValidateTessLevelAtReference(decoration, inst, inst, inst); |
| } |
| |
| spv_result_t BuiltInsValidator::ValidateTessLevelAtReference( |
| const Decoration& decoration, const Instruction& built_in_inst, |
| const Instruction& referenced_inst, |
| const Instruction& referenced_from_inst) { |
| uint32_t operand = decoration.params()[0]; |
| if (spvIsVulkanEnv(_.context()->target_env)) { |
| const spv::StorageClass storage_class = GetStorageClass(referenced_from_inst); |
| if (storage_class != spv::StorageClass::Max && |
| storage_class != spv::StorageClass::Input && |
| storage_class != spv::StorageClass::Output) { |
| return _.diag(SPV_ERROR_INVALID_DATA, &referenced_from_inst) |
| << "Vulkan spec allows BuiltIn " |
| << _.grammar().lookupOperandName(SPV_OPERAND_TYPE_BUILT_IN, |
| operand) |
| << " to be only used for variables with Input or Output storage " |
| "class. " |
| << GetReferenceDesc(decoration, built_in_inst, referenced_inst, |
| referenced_from_inst) |
| << " " << GetStorageClassDesc(referenced_from_inst); |
| } |
| |
| if (storage_class == spv::StorageClass::Input) { |
| assert(function_id_ == 0); |
| uint32_t vuid = (spv::BuiltIn(decoration.params()[0]) == spv::BuiltIn::TessLevelOuter) ? 4391 : 4395; |
| id_to_at_reference_checks_[referenced_from_inst.id()].push_back(std::bind( |
| &BuiltInsValidator::ValidateNotCalledWithExecutionModel, this, vuid, |
| "Vulkan spec doesn't allow TessLevelOuter/TessLevelInner to be " |
| "used " |
| "for variables with Input storage class if execution model is " |
| "TessellationControl.", |
| spv::ExecutionModel::TessellationControl, decoration, built_in_inst, |
| referenced_from_inst, std::placeholders::_1)); |
| } |
| |
| if (storage_class == spv::StorageClass::Output) { |
| assert(function_id_ == 0); |
| uint32_t vuid = (spv::BuiltIn(decoration.params()[0]) == spv::BuiltIn::TessLevelOuter) ? 4392 : 4396; |
| id_to_at_reference_checks_[referenced_from_inst.id()].push_back(std::bind( |
| &BuiltInsValidator::ValidateNotCalledWithExecutionModel, this, vuid, |
| "Vulkan spec doesn't allow TessLevelOuter/TessLevelInner to be " |
| "used " |
| "for variables with Output storage class if execution model is " |
| "TessellationEvaluation.", |
| spv::ExecutionModel::TessellationEvaluation, decoration, built_in_inst, |
| referenced_from_inst, std::placeholders::_1)); |
| } |
| |
| for (const spv::ExecutionModel execution_model : execution_models_) { |
| switch (execution_model) { |
| case spv::ExecutionModel::TessellationControl: |
| case spv::ExecutionModel::TessellationEvaluation: { |
| // Ok. |
| break; |
| } |
| |
| default: { |
| uint32_t vuid = (spv::BuiltIn(operand) == spv::BuiltIn::TessLevelOuter) ? 4390 : 4394; |
| return _.diag(SPV_ERROR_INVALID_DATA, &referenced_from_inst) |
| << _.VkErrorID(vuid) << "Vulkan spec allows BuiltIn " |
| << _.grammar().lookupOperandName(SPV_OPERAND_TYPE_BUILT_IN, |
| operand) |
| << " to be used only with TessellationControl or " |
| "TessellationEvaluation execution models. " |
| << GetReferenceDesc(decoration, built_in_inst, referenced_inst, |
| referenced_from_inst, execution_model); |
| } |
| } |
| } |
| } |
| |
| if (function_id_ == 0) { |
| // Propagate this rule to all dependant ids in the global scope. |
| id_to_at_reference_checks_[referenced_from_inst.id()].push_back(std::bind( |
| &BuiltInsValidator::ValidateTessLevelAtReference, this, decoration, |
| built_in_inst, referenced_from_inst, std::placeholders::_1)); |
| } |
| |
| return SPV_SUCCESS; |
| } |
| |
| spv_result_t BuiltInsValidator::ValidateVertexIndexAtDefinition( |
| const Decoration& decoration, const Instruction& inst) { |
| if (spvIsVulkanEnv(_.context()->target_env)) { |
| if (spv_result_t error = ValidateI32( |
| decoration, inst, |
| [this, &inst](const std::string& message) -> spv_result_t { |
| return _.diag(SPV_ERROR_INVALID_DATA, &inst) |
| << _.VkErrorID(4400) << "According to the " |
| << spvLogStringForEnv(_.context()->target_env) |
| << " spec BuiltIn VertexIndex variable needs to be a " |
| "32-bit int scalar. " |
|