blob: 5bc4d2cef4c0a9aab0a8044dbf3f45d9ee3d81c9 [file] [log] [blame]
// Copyright (c) 2015-2016 The Khronos Group Inc.
//
// Licensed under the Apache License, Version 2.0 (the "License");
// you may not use this file except in compliance with the License.
// You may obtain a copy of the License at
//
// http://www.apache.org/licenses/LICENSE-2.0
//
// Unless required by applicable law or agreed to in writing, software
// distributed under the License is distributed on an "AS IS" BASIS,
// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
// See the License for the specific language governing permissions and
// limitations under the License.
// Performs validation on instructions that appear inside of a SPIR-V block.
#include <cassert>
#include <sstream>
#include <string>
#include <vector>
#include "source/enum_set.h"
#include "source/enum_string_mapping.h"
#include "source/extensions.h"
#include "source/opcode.h"
#include "source/operand.h"
#include "source/spirv_constant.h"
#include "source/spirv_target_env.h"
#include "source/spirv_validator_options.h"
#include "source/util/string_utils.h"
#include "source/val/validate.h"
#include "source/val/validation_state.h"
namespace spvtools {
namespace val {
namespace {
std::string ToString(const CapabilitySet& capabilities,
const AssemblyGrammar& grammar) {
std::stringstream ss;
for (auto capability : capabilities) {
spv_operand_desc desc;
if (SPV_SUCCESS == grammar.lookupOperand(SPV_OPERAND_TYPE_CAPABILITY,
uint32_t(capability), &desc))
ss << desc->name << " ";
else
ss << uint32_t(capability) << " ";
}
return ss.str();
}
// Returns capabilities that enable an opcode. An empty result is interpreted
// as no prohibition of use of the opcode. If the result is non-empty, then
// the opcode may only be used if at least one of the capabilities is specified
// by the module.
CapabilitySet EnablingCapabilitiesForOp(const ValidationState_t& state,
spv::Op opcode) {
// Exceptions for SPV_AMD_shader_ballot
switch (opcode) {
// Normally these would require Group capability
case spv::Op::OpGroupIAddNonUniformAMD:
case spv::Op::OpGroupFAddNonUniformAMD:
case spv::Op::OpGroupFMinNonUniformAMD:
case spv::Op::OpGroupUMinNonUniformAMD:
case spv::Op::OpGroupSMinNonUniformAMD:
case spv::Op::OpGroupFMaxNonUniformAMD:
case spv::Op::OpGroupUMaxNonUniformAMD:
case spv::Op::OpGroupSMaxNonUniformAMD:
if (state.HasExtension(kSPV_AMD_shader_ballot)) return CapabilitySet();
break;
default:
break;
}
// Look it up in the grammar
spv_opcode_desc opcode_desc = {};
if (SPV_SUCCESS == state.grammar().lookupOpcode(opcode, &opcode_desc)) {
return state.grammar().filterCapsAgainstTargetEnv(
opcode_desc->capabilities, opcode_desc->numCapabilities);
}
return CapabilitySet();
}
// Returns SPV_SUCCESS if, for the given operand, the target environment
// satsifies minimum version requirements, or if the module declares an
// enabling extension for the operand. Otherwise emit a diagnostic and
// return an error code.
spv_result_t OperandVersionExtensionCheck(
ValidationState_t& _, const Instruction* inst, size_t which_operand,
const spv_operand_desc_t& operand_desc, uint32_t word) {
const uint32_t module_version = _.version();
const uint32_t operand_min_version = operand_desc.minVersion;
const uint32_t operand_last_version = operand_desc.lastVersion;
const bool reserved = operand_min_version == 0xffffffffu;
const bool version_satisfied = !reserved &&
(operand_min_version <= module_version) &&
(module_version <= operand_last_version);
if (version_satisfied) {
return SPV_SUCCESS;
}
if (operand_last_version < module_version) {
return _.diag(SPV_ERROR_WRONG_VERSION, inst)
<< spvtools::utils::CardinalToOrdinal(which_operand)
<< " operand of " << spvOpcodeString(inst->opcode()) << ": operand "
<< operand_desc.name << "(" << word << ") requires SPIR-V version "
<< SPV_SPIRV_VERSION_MAJOR_PART(operand_last_version) << "."
<< SPV_SPIRV_VERSION_MINOR_PART(operand_last_version)
<< " or earlier";
}
if (!reserved && operand_desc.numExtensions == 0) {
return _.diag(SPV_ERROR_WRONG_VERSION, inst)
<< spvtools::utils::CardinalToOrdinal(which_operand)
<< " operand of " << spvOpcodeString(inst->opcode()) << ": operand "
<< operand_desc.name << "(" << word << ") requires SPIR-V version "
<< SPV_SPIRV_VERSION_MAJOR_PART(operand_min_version) << "."
<< SPV_SPIRV_VERSION_MINOR_PART(operand_min_version) << " or later";
} else {
ExtensionSet required_extensions(operand_desc.numExtensions,
operand_desc.extensions);
if (!_.HasAnyOfExtensions(required_extensions)) {
return _.diag(SPV_ERROR_MISSING_EXTENSION, inst)
<< spvtools::utils::CardinalToOrdinal(which_operand)
<< " operand of " << spvOpcodeString(inst->opcode())
<< ": operand " << operand_desc.name << "(" << word
<< ") requires one of these extensions: "
<< ExtensionSetToString(required_extensions);
}
}
return SPV_SUCCESS;
}
// Returns SPV_SUCCESS if the given operand is enabled by capabilities declared
// in the module. Otherwise issues an error message and returns
// SPV_ERROR_INVALID_CAPABILITY.
spv_result_t CheckRequiredCapabilities(ValidationState_t& state,
const Instruction* inst,
size_t which_operand,
const spv_parsed_operand_t& operand,
uint32_t word) {
// Mere mention of PointSize, ClipDistance, or CullDistance in a Builtin
// decoration does not require the associated capability. The use of such
// a variable value should trigger the capability requirement, but that's
// not implemented yet. This rule is independent of target environment.
// See https://github.com/KhronosGroup/SPIRV-Tools/issues/365
if (operand.type == SPV_OPERAND_TYPE_BUILT_IN) {
switch (spv::BuiltIn(word)) {
case spv::BuiltIn::PointSize:
case spv::BuiltIn::ClipDistance:
case spv::BuiltIn::CullDistance:
return SPV_SUCCESS;
default:
break;
}
} else if (operand.type == SPV_OPERAND_TYPE_FP_ROUNDING_MODE) {
// Allow all FP rounding modes if requested
if (state.features().free_fp_rounding_mode) {
return SPV_SUCCESS;
}
} else if (operand.type == SPV_OPERAND_TYPE_GROUP_OPERATION &&
state.features().group_ops_reduce_and_scans &&
(word <= uint32_t(spv::GroupOperation::ExclusiveScan))) {
// Allow certain group operations if requested.
return SPV_SUCCESS;
}
CapabilitySet enabling_capabilities;
spv_operand_desc operand_desc = nullptr;
const auto lookup_result =
state.grammar().lookupOperand(operand.type, word, &operand_desc);
if (lookup_result == SPV_SUCCESS) {
// Allow FPRoundingMode decoration if requested.
if (operand.type == SPV_OPERAND_TYPE_DECORATION &&
spv::Decoration(operand_desc->value) ==
spv::Decoration::FPRoundingMode) {
if (state.features().free_fp_rounding_mode) return SPV_SUCCESS;
// Vulkan API requires more capabilities on rounding mode.
if (spvIsVulkanEnv(state.context()->target_env)) {
enabling_capabilities.insert(
spv::Capability::StorageUniformBufferBlock16);
enabling_capabilities.insert(spv::Capability::StorageUniform16);
enabling_capabilities.insert(spv::Capability::StoragePushConstant16);
enabling_capabilities.insert(spv::Capability::StorageInputOutput16);
}
} else {
enabling_capabilities = state.grammar().filterCapsAgainstTargetEnv(
operand_desc->capabilities, operand_desc->numCapabilities);
}
// When encountering an OpCapability instruction, the instruction pass
// registers a capability with the module *before* checking capabilities.
// So in the case of an OpCapability instruction, don't bother checking
// enablement by another capability.
if (inst->opcode() != spv::Op::OpCapability) {
const bool enabled_by_cap =
state.HasAnyOfCapabilities(enabling_capabilities);
if (!enabling_capabilities.empty() && !enabled_by_cap) {
return state.diag(SPV_ERROR_INVALID_CAPABILITY, inst)
<< "Operand " << which_operand << " of "
<< spvOpcodeString(inst->opcode())
<< " requires one of these capabilities: "
<< ToString(enabling_capabilities, state.grammar());
}
}
return OperandVersionExtensionCheck(state, inst, which_operand,
*operand_desc, word);
}
return SPV_SUCCESS;
}
// Returns SPV_ERROR_INVALID_BINARY and emits a diagnostic if the instruction
// is explicitly reserved in the SPIR-V core spec. Otherwise return
// SPV_SUCCESS.
spv_result_t ReservedCheck(ValidationState_t& _, const Instruction* inst) {
const spv::Op opcode = inst->opcode();
switch (opcode) {
// These instructions are enabled by a capability, but should never
// be used anyway.
case spv::Op::OpImageSparseSampleProjImplicitLod:
case spv::Op::OpImageSparseSampleProjExplicitLod:
case spv::Op::OpImageSparseSampleProjDrefImplicitLod:
case spv::Op::OpImageSparseSampleProjDrefExplicitLod: {
spv_opcode_desc inst_desc;
_.grammar().lookupOpcode(opcode, &inst_desc);
return _.diag(SPV_ERROR_INVALID_BINARY, inst)
<< "Invalid Opcode name 'Op" << inst_desc->name << "'";
}
default:
break;
}
return SPV_SUCCESS;
}
// Returns SPV_ERROR_INVALID_CAPABILITY and emits a diagnostic if the
// instruction is invalid because the required capability isn't declared
// in the module.
spv_result_t CapabilityCheck(ValidationState_t& _, const Instruction* inst) {
const spv::Op opcode = inst->opcode();
CapabilitySet opcode_caps = EnablingCapabilitiesForOp(_, opcode);
if (!_.HasAnyOfCapabilities(opcode_caps)) {
return _.diag(SPV_ERROR_INVALID_CAPABILITY, inst)
<< "Opcode " << spvOpcodeString(opcode)
<< " requires one of these capabilities: "
<< ToString(opcode_caps, _.grammar());
}
for (size_t i = 0; i < inst->operands().size(); ++i) {
const auto& operand = inst->operand(i);
const auto word = inst->word(operand.offset);
if (spvOperandIsConcreteMask(operand.type)) {
// Check for required capabilities for each bit position of the mask.
for (uint32_t mask_bit = 0x80000000; mask_bit; mask_bit >>= 1) {
if (word & mask_bit) {
spv_result_t status =
CheckRequiredCapabilities(_, inst, i + 1, operand, mask_bit);
if (status != SPV_SUCCESS) return status;
}
}
} else if (spvIsIdType(operand.type)) {
// TODO(dneto): Check the value referenced by this Id, if we can compute
// it. For now, just punt, to fix issue 248:
// https://github.com/KhronosGroup/SPIRV-Tools/issues/248
} else {
// Check the operand word as a whole.
spv_result_t status =
CheckRequiredCapabilities(_, inst, i + 1, operand, word);
if (status != SPV_SUCCESS) return status;
}
}
return SPV_SUCCESS;
}
// Checks that the instruction can be used in this target environment's base
// version. Assumes that CapabilityCheck has checked direct capability
// dependencies for the opcode.
spv_result_t VersionCheck(ValidationState_t& _, const Instruction* inst) {
const auto opcode = inst->opcode();
spv_opcode_desc inst_desc;
const spv_result_t r = _.grammar().lookupOpcode(opcode, &inst_desc);
assert(r == SPV_SUCCESS);
(void)r;
const auto min_version = inst_desc->minVersion;
const auto last_version = inst_desc->lastVersion;
const auto module_version = _.version();
if (last_version < module_version) {
return _.diag(SPV_ERROR_WRONG_VERSION, inst)
<< spvOpcodeString(opcode) << " requires SPIR-V version "
<< SPV_SPIRV_VERSION_MAJOR_PART(last_version) << "."
<< SPV_SPIRV_VERSION_MINOR_PART(last_version) << " or earlier";
}
// OpTerminateInvocation is special because it is enabled by Shader
// capability, but also requires an extension and/or version check.
const bool capability_check_is_sufficient =
inst->opcode() != spv::Op::OpTerminateInvocation;
if (capability_check_is_sufficient && (inst_desc->numCapabilities > 0u)) {
// We already checked that the direct capability dependency has been
// satisfied. We don't need to check any further.
return SPV_SUCCESS;
}
ExtensionSet exts(inst_desc->numExtensions, inst_desc->extensions);
if (exts.empty()) {
// If no extensions can enable this instruction, then emit error
// messages only concerning core SPIR-V versions if errors happen.
if (min_version == ~0u) {
return _.diag(SPV_ERROR_WRONG_VERSION, inst)
<< spvOpcodeString(opcode) << " is reserved for future use.";
}
if (module_version < min_version) {
return _.diag(SPV_ERROR_WRONG_VERSION, inst)
<< spvOpcodeString(opcode) << " requires SPIR-V version "
<< SPV_SPIRV_VERSION_MAJOR_PART(min_version) << "."
<< SPV_SPIRV_VERSION_MINOR_PART(min_version) << " at minimum.";
}
} else if (!_.HasAnyOfExtensions(exts)) {
// Otherwise, we only error out when no enabling extensions are
// registered.
if (min_version == ~0u) {
return _.diag(SPV_ERROR_MISSING_EXTENSION, inst)
<< spvOpcodeString(opcode)
<< " requires one of the following extensions: "
<< ExtensionSetToString(exts);
}
if (module_version < min_version) {
return _.diag(SPV_ERROR_WRONG_VERSION, inst)
<< spvOpcodeString(opcode) << " requires SPIR-V version "
<< SPV_SPIRV_VERSION_MAJOR_PART(min_version) << "."
<< SPV_SPIRV_VERSION_MINOR_PART(min_version)
<< " at minimum or one of the following extensions: "
<< ExtensionSetToString(exts);
}
}
return SPV_SUCCESS;
}
// Checks that the Resuld <id> is within the valid bound.
spv_result_t LimitCheckIdBound(ValidationState_t& _, const Instruction* inst) {
if (inst->id() >= _.getIdBound()) {
return _.diag(SPV_ERROR_INVALID_BINARY, inst)
<< "Result <id> '" << inst->id()
<< "' must be less than the ID bound '" << _.getIdBound() << "'.";
}
return SPV_SUCCESS;
}
// Checks that the number of OpTypeStruct members is within the limit.
spv_result_t LimitCheckStruct(ValidationState_t& _, const Instruction* inst) {
if (spv::Op::OpTypeStruct != inst->opcode()) {
return SPV_SUCCESS;
}
// Number of members is the number of operands of the instruction minus 1.
// One operand is the result ID.
const uint16_t limit =
static_cast<uint16_t>(_.options()->universal_limits_.max_struct_members);
if (inst->operands().size() - 1 > limit) {
return _.diag(SPV_ERROR_INVALID_BINARY, inst)
<< "Number of OpTypeStruct members (" << inst->operands().size() - 1
<< ") has exceeded the limit (" << limit << ").";
}
// Section 2.17 of SPIRV Spec specifies that the "Structure Nesting Depth"
// must be less than or equal to 255.
// This is interpreted as structures including other structures as
// members. The code does not follow pointers or look into arrays to see
// if we reach a structure downstream. The nesting depth of a struct is
// 1+(largest depth of any member). Scalars are at depth 0.
uint32_t max_member_depth = 0;
// Struct members start at word 2 of OpTypeStruct instruction.
for (size_t word_i = 2; word_i < inst->words().size(); ++word_i) {
auto member = inst->word(word_i);
auto memberTypeInstr = _.FindDef(member);
if (memberTypeInstr && spv::Op::OpTypeStruct == memberTypeInstr->opcode()) {
max_member_depth = std::max(
max_member_depth, _.struct_nesting_depth(memberTypeInstr->id()));
}
}
const uint32_t depth_limit = _.options()->universal_limits_.max_struct_depth;
const uint32_t cur_depth = 1 + max_member_depth;
_.set_struct_nesting_depth(inst->id(), cur_depth);
if (cur_depth > depth_limit) {
return _.diag(SPV_ERROR_INVALID_BINARY, inst)
<< "Structure Nesting Depth may not be larger than " << depth_limit
<< ". Found " << cur_depth << ".";
}
return SPV_SUCCESS;
}
// Checks that the number of (literal, label) pairs in OpSwitch is within
// the limit.
spv_result_t LimitCheckSwitch(ValidationState_t& _, const Instruction* inst) {
if (spv::Op::OpSwitch == inst->opcode()) {
// The instruction syntax is as follows:
// OpSwitch <selector ID> <Default ID> literal label literal label ...
// literal,label pairs come after the first 2 operands.
// It is guaranteed at this point that num_operands is an even number.
size_t num_pairs = (inst->operands().size() - 2) / 2;
const unsigned int num_pairs_limit =
_.options()->universal_limits_.max_switch_branches;
if (num_pairs > num_pairs_limit) {
return _.diag(SPV_ERROR_INVALID_BINARY, inst)
<< "Number of (literal, label) pairs in OpSwitch (" << num_pairs
<< ") exceeds the limit (" << num_pairs_limit << ").";
}
}
return SPV_SUCCESS;
}
// Ensure the number of variables of the given class does not exceed the
// limit.
spv_result_t LimitCheckNumVars(ValidationState_t& _, const uint32_t var_id,
const spv::StorageClass storage_class) {
if (spv::StorageClass::Function == storage_class) {
_.registerLocalVariable(var_id);
const uint32_t num_local_vars_limit =
_.options()->universal_limits_.max_local_variables;
if (_.num_local_vars() > num_local_vars_limit) {
return _.diag(SPV_ERROR_INVALID_BINARY, nullptr)
<< "Number of local variables ('Function' Storage Class) "
"exceeded the valid limit ("
<< num_local_vars_limit << ").";
}
} else {
_.registerGlobalVariable(var_id);
const uint32_t num_global_vars_limit =
_.options()->universal_limits_.max_global_variables;
if (_.num_global_vars() > num_global_vars_limit) {
return _.diag(SPV_ERROR_INVALID_BINARY, nullptr)
<< "Number of Global Variables (Storage Class other than "
"'Function') exceeded the valid limit ("
<< num_global_vars_limit << ").";
}
}
return SPV_SUCCESS;
}
// Parses OpExtension instruction and logs warnings if unsuccessful.
spv_result_t CheckIfKnownExtension(ValidationState_t& _,
const Instruction* inst) {
const std::string extension_str = GetExtensionString(&(inst->c_inst()));
Extension extension;
if (!GetExtensionFromString(extension_str.c_str(), &extension)) {
return _.diag(SPV_WARNING, inst)
<< "Found unrecognized extension " << extension_str;
}
return SPV_SUCCESS;
}
} // namespace
spv_result_t InstructionPass(ValidationState_t& _, const Instruction* inst) {
const spv::Op opcode = inst->opcode();
if (opcode == spv::Op::OpExtension) {
CheckIfKnownExtension(_, inst);
} else if (opcode == spv::Op::OpCapability) {
_.RegisterCapability(inst->GetOperandAs<spv::Capability>(0));
} else if (opcode == spv::Op::OpMemoryModel) {
if (_.has_memory_model_specified()) {
return _.diag(SPV_ERROR_INVALID_LAYOUT, inst)
<< "OpMemoryModel should only be provided once.";
}
_.set_addressing_model(inst->GetOperandAs<spv::AddressingModel>(0));
_.set_memory_model(inst->GetOperandAs<spv::MemoryModel>(1));
} else if (opcode == spv::Op::OpExecutionMode ||
opcode == spv::Op::OpExecutionModeId) {
const uint32_t entry_point = inst->word(1);
_.RegisterExecutionModeForEntryPoint(entry_point,
spv::ExecutionMode(inst->word(2)));
} else if (opcode == spv::Op::OpVariable) {
const auto storage_class = inst->GetOperandAs<spv::StorageClass>(2);
if (auto error = LimitCheckNumVars(_, inst->id(), storage_class)) {
return error;
}
} else if (opcode == spv::Op::OpSamplerImageAddressingModeNV) {
if (!_.HasCapability(spv::Capability::BindlessTextureNV)) {
return _.diag(SPV_ERROR_MISSING_EXTENSION, inst)
<< "OpSamplerImageAddressingModeNV supported only with extension "
"SPV_NV_bindless_texture";
}
uint32_t bitwidth = inst->GetOperandAs<uint32_t>(0);
if (_.samplerimage_variable_address_mode() != 0) {
return _.diag(SPV_ERROR_INVALID_LAYOUT, inst)
<< "OpSamplerImageAddressingModeNV should only be provided once";
}
if (bitwidth != 32 && bitwidth != 64) {
return _.diag(SPV_ERROR_INVALID_DATA, inst)
<< "OpSamplerImageAddressingModeNV bitwidth should be 64 or 32";
}
_.set_samplerimage_variable_address_mode(bitwidth);
}
if (auto error = ReservedCheck(_, inst)) return error;
if (auto error = CapabilityCheck(_, inst)) return error;
if (auto error = LimitCheckIdBound(_, inst)) return error;
if (auto error = LimitCheckStruct(_, inst)) return error;
if (auto error = LimitCheckSwitch(_, inst)) return error;
if (auto error = VersionCheck(_, inst)) return error;
// All instruction checks have passed.
return SPV_SUCCESS;
}
} // namespace val
} // namespace spvtools