blob: aaee8c21f28910072284a6ed0940694313556219 [file] [log] [blame]
//===- DemandedBits.cpp - Determine demanded bits -------------------------===//
//
// Part of the LLVM Project, under the Apache License v2.0 with LLVM Exceptions.
// See https://llvm.org/LICENSE.txt for license information.
// SPDX-License-Identifier: Apache-2.0 WITH LLVM-exception
//
//===----------------------------------------------------------------------===//
//
// This pass implements a demanded bits analysis. A demanded bit is one that
// contributes to a result; bits that are not demanded can be either zero or
// one without affecting control or data flow. For example in this sequence:
//
// %1 = add i32 %x, %y
// %2 = trunc i32 %1 to i16
//
// Only the lowest 16 bits of %1 are demanded; the rest are removed by the
// trunc.
//
//===----------------------------------------------------------------------===//
#include "llvm/Analysis/DemandedBits.h"
#include "llvm/ADT/APInt.h"
#include "llvm/ADT/SetVector.h"
#include "llvm/ADT/StringExtras.h"
#include "llvm/Analysis/AssumptionCache.h"
#include "llvm/Analysis/ValueTracking.h"
#include "llvm/IR/BasicBlock.h"
#include "llvm/IR/Constants.h"
#include "llvm/IR/DataLayout.h"
#include "llvm/IR/DerivedTypes.h"
#include "llvm/IR/Dominators.h"
#include "llvm/IR/InstIterator.h"
#include "llvm/IR/InstrTypes.h"
#include "llvm/IR/Instruction.h"
#include "llvm/IR/IntrinsicInst.h"
#include "llvm/IR/Intrinsics.h"
#include "llvm/IR/Module.h"
#include "llvm/IR/Operator.h"
#include "llvm/IR/PassManager.h"
#include "llvm/IR/PatternMatch.h"
#include "llvm/IR/Type.h"
#include "llvm/IR/Use.h"
#include "llvm/InitializePasses.h"
#include "llvm/Pass.h"
#include "llvm/Support/Casting.h"
#include "llvm/Support/Debug.h"
#include "llvm/Support/KnownBits.h"
#include "llvm/Support/raw_ostream.h"
#include <algorithm>
#include <cstdint>
using namespace llvm;
using namespace llvm::PatternMatch;
#define DEBUG_TYPE "demanded-bits"
char DemandedBitsWrapperPass::ID = 0;
INITIALIZE_PASS_BEGIN(DemandedBitsWrapperPass, "demanded-bits",
"Demanded bits analysis", false, false)
INITIALIZE_PASS_DEPENDENCY(AssumptionCacheTracker)
INITIALIZE_PASS_DEPENDENCY(DominatorTreeWrapperPass)
INITIALIZE_PASS_END(DemandedBitsWrapperPass, "demanded-bits",
"Demanded bits analysis", false, false)
DemandedBitsWrapperPass::DemandedBitsWrapperPass() : FunctionPass(ID) {
initializeDemandedBitsWrapperPassPass(*PassRegistry::getPassRegistry());
}
void DemandedBitsWrapperPass::getAnalysisUsage(AnalysisUsage &AU) const {
AU.setPreservesCFG();
AU.addRequired<AssumptionCacheTracker>();
AU.addRequired<DominatorTreeWrapperPass>();
AU.setPreservesAll();
}
void DemandedBitsWrapperPass::print(raw_ostream &OS, const Module *M) const {
DB->print(OS);
}
static bool isAlwaysLive(Instruction *I) {
return I->isTerminator() || isa<DbgInfoIntrinsic>(I) || I->isEHPad() ||
I->mayHaveSideEffects();
}
void DemandedBits::determineLiveOperandBits(
const Instruction *UserI, const Value *Val, unsigned OperandNo,
const APInt &AOut, APInt &AB, KnownBits &Known, KnownBits &Known2,
bool &KnownBitsComputed) {
unsigned BitWidth = AB.getBitWidth();
// We're called once per operand, but for some instructions, we need to
// compute known bits of both operands in order to determine the live bits of
// either (when both operands are instructions themselves). We don't,
// however, want to do this twice, so we cache the result in APInts that live
// in the caller. For the two-relevant-operands case, both operand values are
// provided here.
auto ComputeKnownBits =
[&](unsigned BitWidth, const Value *V1, const Value *V2) {
if (KnownBitsComputed)
return;
KnownBitsComputed = true;
const DataLayout &DL = UserI->getModule()->getDataLayout();
Known = KnownBits(BitWidth);
computeKnownBits(V1, Known, DL, 0, &AC, UserI, &DT);
if (V2) {
Known2 = KnownBits(BitWidth);
computeKnownBits(V2, Known2, DL, 0, &AC, UserI, &DT);
}
};
switch (UserI->getOpcode()) {
default: break;
case Instruction::Call:
case Instruction::Invoke:
if (const IntrinsicInst *II = dyn_cast<IntrinsicInst>(UserI))
switch (II->getIntrinsicID()) {
default: break;
case Intrinsic::bswap:
// The alive bits of the input are the swapped alive bits of
// the output.
AB = AOut.byteSwap();
break;
case Intrinsic::bitreverse:
// The alive bits of the input are the reversed alive bits of
// the output.
AB = AOut.reverseBits();
break;
case Intrinsic::ctlz:
if (OperandNo == 0) {
// We need some output bits, so we need all bits of the
// input to the left of, and including, the leftmost bit
// known to be one.
ComputeKnownBits(BitWidth, Val, nullptr);
AB = APInt::getHighBitsSet(BitWidth,
std::min(BitWidth, Known.countMaxLeadingZeros()+1));
}
break;
case Intrinsic::cttz:
if (OperandNo == 0) {
// We need some output bits, so we need all bits of the
// input to the right of, and including, the rightmost bit
// known to be one.
ComputeKnownBits(BitWidth, Val, nullptr);
AB = APInt::getLowBitsSet(BitWidth,
std::min(BitWidth, Known.countMaxTrailingZeros()+1));
}
break;
case Intrinsic::fshl:
case Intrinsic::fshr: {
const APInt *SA;
if (OperandNo == 2) {
// Shift amount is modulo the bitwidth. For powers of two we have
// SA % BW == SA & (BW - 1).
if (isPowerOf2_32(BitWidth))
AB = BitWidth - 1;
} else if (match(II->getOperand(2), m_APInt(SA))) {
// Normalize to funnel shift left. APInt shifts of BitWidth are well-
// defined, so no need to special-case zero shifts here.
uint64_t ShiftAmt = SA->urem(BitWidth);
if (II->getIntrinsicID() == Intrinsic::fshr)
ShiftAmt = BitWidth - ShiftAmt;
if (OperandNo == 0)
AB = AOut.lshr(ShiftAmt);
else if (OperandNo == 1)
AB = AOut.shl(BitWidth - ShiftAmt);
}
break;
}
}
break;
case Instruction::Add:
case Instruction::Sub:
case Instruction::Mul:
// Find the highest live output bit. We don't need any more input
// bits than that (adds, and thus subtracts, ripple only to the
// left).
AB = APInt::getLowBitsSet(BitWidth, AOut.getActiveBits());
break;
case Instruction::Shl:
if (OperandNo == 0) {
const APInt *ShiftAmtC;
if (match(UserI->getOperand(1), m_APInt(ShiftAmtC))) {
uint64_t ShiftAmt = ShiftAmtC->getLimitedValue(BitWidth - 1);
AB = AOut.lshr(ShiftAmt);
// If the shift is nuw/nsw, then the high bits are not dead
// (because we've promised that they *must* be zero).
const ShlOperator *S = cast<ShlOperator>(UserI);
if (S->hasNoSignedWrap())
AB |= APInt::getHighBitsSet(BitWidth, ShiftAmt+1);
else if (S->hasNoUnsignedWrap())
AB |= APInt::getHighBitsSet(BitWidth, ShiftAmt);
}
}
break;
case Instruction::LShr:
if (OperandNo == 0) {
const APInt *ShiftAmtC;
if (match(UserI->getOperand(1), m_APInt(ShiftAmtC))) {
uint64_t ShiftAmt = ShiftAmtC->getLimitedValue(BitWidth - 1);
AB = AOut.shl(ShiftAmt);
// If the shift is exact, then the low bits are not dead
// (they must be zero).
if (cast<LShrOperator>(UserI)->isExact())
AB |= APInt::getLowBitsSet(BitWidth, ShiftAmt);
}
}
break;
case Instruction::AShr:
if (OperandNo == 0) {
const APInt *ShiftAmtC;
if (match(UserI->getOperand(1), m_APInt(ShiftAmtC))) {
uint64_t ShiftAmt = ShiftAmtC->getLimitedValue(BitWidth - 1);
AB = AOut.shl(ShiftAmt);
// Because the high input bit is replicated into the
// high-order bits of the result, if we need any of those
// bits, then we must keep the highest input bit.
if ((AOut & APInt::getHighBitsSet(BitWidth, ShiftAmt))
.getBoolValue())
AB.setSignBit();
// If the shift is exact, then the low bits are not dead
// (they must be zero).
if (cast<AShrOperator>(UserI)->isExact())
AB |= APInt::getLowBitsSet(BitWidth, ShiftAmt);
}
}
break;
case Instruction::And:
AB = AOut;
// For bits that are known zero, the corresponding bits in the
// other operand are dead (unless they're both zero, in which
// case they can't both be dead, so just mark the LHS bits as
// dead).
ComputeKnownBits(BitWidth, UserI->getOperand(0), UserI->getOperand(1));
if (OperandNo == 0)
AB &= ~Known2.Zero;
else
AB &= ~(Known.Zero & ~Known2.Zero);
break;
case Instruction::Or:
AB = AOut;
// For bits that are known one, the corresponding bits in the
// other operand are dead (unless they're both one, in which
// case they can't both be dead, so just mark the LHS bits as
// dead).
ComputeKnownBits(BitWidth, UserI->getOperand(0), UserI->getOperand(1));
if (OperandNo == 0)
AB &= ~Known2.One;
else
AB &= ~(Known.One & ~Known2.One);
break;
case Instruction::Xor:
case Instruction::PHI:
AB = AOut;
break;
case Instruction::Trunc:
AB = AOut.zext(BitWidth);
break;
case Instruction::ZExt:
AB = AOut.trunc(BitWidth);
break;
case Instruction::SExt:
AB = AOut.trunc(BitWidth);
// Because the high input bit is replicated into the
// high-order bits of the result, if we need any of those
// bits, then we must keep the highest input bit.
if ((AOut & APInt::getHighBitsSet(AOut.getBitWidth(),
AOut.getBitWidth() - BitWidth))
.getBoolValue())
AB.setSignBit();
break;
case Instruction::Select:
if (OperandNo != 0)
AB = AOut;
break;
case Instruction::ExtractElement:
if (OperandNo == 0)
AB = AOut;
break;
case Instruction::InsertElement:
case Instruction::ShuffleVector:
if (OperandNo == 0 || OperandNo == 1)
AB = AOut;
break;
}
}
bool DemandedBitsWrapperPass::runOnFunction(Function &F) {
auto &AC = getAnalysis<AssumptionCacheTracker>().getAssumptionCache(F);
auto &DT = getAnalysis<DominatorTreeWrapperPass>().getDomTree();
DB.emplace(F, AC, DT);
return false;
}
void DemandedBitsWrapperPass::releaseMemory() {
DB.reset();
}
void DemandedBits::performAnalysis() {
if (Analyzed)
// Analysis already completed for this function.
return;
Analyzed = true;
Visited.clear();
AliveBits.clear();
DeadUses.clear();
SmallSetVector<Instruction*, 16> Worklist;
// Collect the set of "root" instructions that are known live.
for (Instruction &I : instructions(F)) {
if (!isAlwaysLive(&I))
continue;
LLVM_DEBUG(dbgs() << "DemandedBits: Root: " << I << "\n");
// For integer-valued instructions, set up an initial empty set of alive
// bits and add the instruction to the work list. For other instructions
// add their operands to the work list (for integer values operands, mark
// all bits as live).
Type *T = I.getType();
if (T->isIntOrIntVectorTy()) {
if (AliveBits.try_emplace(&I, T->getScalarSizeInBits(), 0).second)
Worklist.insert(&I);
continue;
}
// Non-integer-typed instructions...
for (Use &OI : I.operands()) {
if (Instruction *J = dyn_cast<Instruction>(OI)) {
Type *T = J->getType();
if (T->isIntOrIntVectorTy())
AliveBits[J] = APInt::getAllOnesValue(T->getScalarSizeInBits());
else
Visited.insert(J);
Worklist.insert(J);
}
}
// To save memory, we don't add I to the Visited set here. Instead, we
// check isAlwaysLive on every instruction when searching for dead
// instructions later (we need to check isAlwaysLive for the
// integer-typed instructions anyway).
}
// Propagate liveness backwards to operands.
while (!Worklist.empty()) {
Instruction *UserI = Worklist.pop_back_val();
LLVM_DEBUG(dbgs() << "DemandedBits: Visiting: " << *UserI);
APInt AOut;
bool InputIsKnownDead = false;
if (UserI->getType()->isIntOrIntVectorTy()) {
AOut = AliveBits[UserI];
LLVM_DEBUG(dbgs() << " Alive Out: 0x"
<< Twine::utohexstr(AOut.getLimitedValue()));
// If all bits of the output are dead, then all bits of the input
// are also dead.
InputIsKnownDead = !AOut && !isAlwaysLive(UserI);
}
LLVM_DEBUG(dbgs() << "\n");
KnownBits Known, Known2;
bool KnownBitsComputed = false;
// Compute the set of alive bits for each operand. These are anded into the
// existing set, if any, and if that changes the set of alive bits, the
// operand is added to the work-list.
for (Use &OI : UserI->operands()) {
// We also want to detect dead uses of arguments, but will only store
// demanded bits for instructions.
Instruction *I = dyn_cast<Instruction>(OI);
if (!I && !isa<Argument>(OI))
continue;
Type *T = OI->getType();
if (T->isIntOrIntVectorTy()) {
unsigned BitWidth = T->getScalarSizeInBits();
APInt AB = APInt::getAllOnesValue(BitWidth);
if (InputIsKnownDead) {
AB = APInt(BitWidth, 0);
} else {
// Bits of each operand that are used to compute alive bits of the
// output are alive, all others are dead.
determineLiveOperandBits(UserI, OI, OI.getOperandNo(), AOut, AB,
Known, Known2, KnownBitsComputed);
// Keep track of uses which have no demanded bits.
if (AB.isNullValue())
DeadUses.insert(&OI);
else
DeadUses.erase(&OI);
}
if (I) {
// If we've added to the set of alive bits (or the operand has not
// been previously visited), then re-queue the operand to be visited
// again.
auto Res = AliveBits.try_emplace(I);
if (Res.second || (AB |= Res.first->second) != Res.first->second) {
Res.first->second = std::move(AB);
Worklist.insert(I);
}
}
} else if (I && Visited.insert(I).second) {
Worklist.insert(I);
}
}
}
}
APInt DemandedBits::getDemandedBits(Instruction *I) {
performAnalysis();
auto Found = AliveBits.find(I);
if (Found != AliveBits.end())
return Found->second;
const DataLayout &DL = I->getModule()->getDataLayout();
return APInt::getAllOnesValue(
DL.getTypeSizeInBits(I->getType()->getScalarType()));
}
bool DemandedBits::isInstructionDead(Instruction *I) {
performAnalysis();
return !Visited.count(I) && AliveBits.find(I) == AliveBits.end() &&
!isAlwaysLive(I);
}
bool DemandedBits::isUseDead(Use *U) {
// We only track integer uses, everything else is assumed live.
if (!(*U)->getType()->isIntOrIntVectorTy())
return false;
// Uses by always-live instructions are never dead.
Instruction *UserI = cast<Instruction>(U->getUser());
if (isAlwaysLive(UserI))
return false;
performAnalysis();
if (DeadUses.count(U))
return true;
// If no output bits are demanded, no input bits are demanded and the use
// is dead. These uses might not be explicitly present in the DeadUses map.
if (UserI->getType()->isIntOrIntVectorTy()) {
auto Found = AliveBits.find(UserI);
if (Found != AliveBits.end() && Found->second.isNullValue())
return true;
}
return false;
}
void DemandedBits::print(raw_ostream &OS) {
performAnalysis();
for (auto &KV : AliveBits) {
OS << "DemandedBits: 0x" << Twine::utohexstr(KV.second.getLimitedValue())
<< " for " << *KV.first << '\n';
}
}
FunctionPass *llvm::createDemandedBitsWrapperPass() {
return new DemandedBitsWrapperPass();
}
AnalysisKey DemandedBitsAnalysis::Key;
DemandedBits DemandedBitsAnalysis::run(Function &F,
FunctionAnalysisManager &AM) {
auto &AC = AM.getResult<AssumptionAnalysis>(F);
auto &DT = AM.getResult<DominatorTreeAnalysis>(F);
return DemandedBits(F, AC, DT);
}
PreservedAnalyses DemandedBitsPrinterPass::run(Function &F,
FunctionAnalysisManager &AM) {
AM.getResult<DemandedBitsAnalysis>(F).print(OS);
return PreservedAnalyses::all();
}