// Copyright (c) 2017 Google Inc.
//
// Licensed under the Apache License, Version 2.0 (the "License");
// you may not use this file except in compliance with the License.
// You may obtain a copy of the License at
//
//     http://www.apache.org/licenses/LICENSE-2.0
//
// Unless required by applicable law or agreed to in writing, software
// distributed under the License is distributed on an "AS IS" BASIS,
// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
// See the License for the specific language governing permissions and
// limitations under the License.

// Validates correctness of logical SPIR-V instructions.

#include "source/val/validate.h"

#include "source/diagnostic.h"
#include "source/opcode.h"
#include "source/val/instruction.h"
#include "source/val/validation_state.h"

namespace spvtools {
namespace val {

// Validates correctness of logical instructions.
spv_result_t LogicalsPass(ValidationState_t& _, const Instruction* inst) {
  const spv::Op opcode = inst->opcode();
  const uint32_t result_type = inst->type_id();

  switch (opcode) {
    case spv::Op::OpAny:
    case spv::Op::OpAll: {
      if (!_.IsBoolScalarType(result_type))
        return _.diag(SPV_ERROR_INVALID_DATA, inst)
               << "Expected bool scalar type as Result Type: "
               << spvOpcodeString(opcode);

      const uint32_t vector_type = _.GetOperandTypeId(inst, 2);
      if (!vector_type || !_.IsBoolVectorType(vector_type))
        return _.diag(SPV_ERROR_INVALID_DATA, inst)
               << "Expected operand to be vector bool: "
               << spvOpcodeString(opcode);

      break;
    }

    case spv::Op::OpIsNan:
    case spv::Op::OpIsInf:
    case spv::Op::OpIsFinite:
    case spv::Op::OpIsNormal:
    case spv::Op::OpSignBitSet: {
      if (!_.IsBoolScalarType(result_type) && !_.IsBoolVectorType(result_type))
        return _.diag(SPV_ERROR_INVALID_DATA, inst)
               << "Expected bool scalar or vector type as Result Type: "
               << spvOpcodeString(opcode);

      const uint32_t operand_type = _.GetOperandTypeId(inst, 2);
      if (!operand_type || (!_.IsFloatScalarType(operand_type) &&
                            !_.IsFloatVectorType(operand_type)))
        return _.diag(SPV_ERROR_INVALID_DATA, inst)
               << "Expected operand to be scalar or vector float: "
               << spvOpcodeString(opcode);

      if (_.GetDimension(result_type) != _.GetDimension(operand_type))
        return _.diag(SPV_ERROR_INVALID_DATA, inst)
               << "Expected vector sizes of Result Type and the operand to be "
                  "equal: "
               << spvOpcodeString(opcode);

      break;
    }

    case spv::Op::OpFOrdEqual:
    case spv::Op::OpFUnordEqual:
    case spv::Op::OpFOrdNotEqual:
    case spv::Op::OpFUnordNotEqual:
    case spv::Op::OpFOrdLessThan:
    case spv::Op::OpFUnordLessThan:
    case spv::Op::OpFOrdGreaterThan:
    case spv::Op::OpFUnordGreaterThan:
    case spv::Op::OpFOrdLessThanEqual:
    case spv::Op::OpFUnordLessThanEqual:
    case spv::Op::OpFOrdGreaterThanEqual:
    case spv::Op::OpFUnordGreaterThanEqual:
    case spv::Op::OpLessOrGreater:
    case spv::Op::OpOrdered:
    case spv::Op::OpUnordered: {
      if (!_.IsBoolScalarType(result_type) && !_.IsBoolVectorType(result_type))
        return _.diag(SPV_ERROR_INVALID_DATA, inst)
               << "Expected bool scalar or vector type as Result Type: "
               << spvOpcodeString(opcode);

      const uint32_t left_operand_type = _.GetOperandTypeId(inst, 2);
      if (!left_operand_type || (!_.IsFloatScalarType(left_operand_type) &&
                                 !_.IsFloatVectorType(left_operand_type)))
        return _.diag(SPV_ERROR_INVALID_DATA, inst)
               << "Expected operands to be scalar or vector float: "
               << spvOpcodeString(opcode);

      if (_.GetDimension(result_type) != _.GetDimension(left_operand_type))
        return _.diag(SPV_ERROR_INVALID_DATA, inst)
               << "Expected vector sizes of Result Type and the operands to be "
                  "equal: "
               << spvOpcodeString(opcode);

      if (left_operand_type != _.GetOperandTypeId(inst, 3))
        return _.diag(SPV_ERROR_INVALID_DATA, inst)
               << "Expected left and right operands to have the same type: "
               << spvOpcodeString(opcode);

      break;
    }

    case spv::Op::OpLogicalEqual:
    case spv::Op::OpLogicalNotEqual:
    case spv::Op::OpLogicalOr:
    case spv::Op::OpLogicalAnd: {
      if (!_.IsBoolScalarType(result_type) && !_.IsBoolVectorType(result_type))
        return _.diag(SPV_ERROR_INVALID_DATA, inst)
               << "Expected bool scalar or vector type as Result Type: "
               << spvOpcodeString(opcode);

      if (result_type != _.GetOperandTypeId(inst, 2) ||
          result_type != _.GetOperandTypeId(inst, 3))
        return _.diag(SPV_ERROR_INVALID_DATA, inst)
               << "Expected both operands to be of Result Type: "
               << spvOpcodeString(opcode);

      break;
    }

    case spv::Op::OpLogicalNot: {
      if (!_.IsBoolScalarType(result_type) && !_.IsBoolVectorType(result_type))
        return _.diag(SPV_ERROR_INVALID_DATA, inst)
               << "Expected bool scalar or vector type as Result Type: "
               << spvOpcodeString(opcode);

      if (result_type != _.GetOperandTypeId(inst, 2))
        return _.diag(SPV_ERROR_INVALID_DATA, inst)
               << "Expected operand to be of Result Type: "
               << spvOpcodeString(opcode);

      break;
    }

    case spv::Op::OpSelect: {
      uint32_t dimension = 1;
      {
        const Instruction* type_inst = _.FindDef(result_type);
        assert(type_inst);

        const auto composites = _.features().select_between_composites;
        auto fail = [&_, composites, inst, opcode]() -> spv_result_t {
          return _.diag(SPV_ERROR_INVALID_DATA, inst)
                 << "Expected scalar or "
                 << (composites ? "composite" : "vector")
                 << " type as Result Type: " << spvOpcodeString(opcode);
        };

        const spv::Op type_opcode = type_inst->opcode();
        switch (type_opcode) {
          case spv::Op::OpTypePointer: {
            if (_.addressing_model() == spv::AddressingModel::Logical &&
                !_.features().variable_pointers)
              return _.diag(SPV_ERROR_INVALID_DATA, inst)
                     << "Using pointers with OpSelect requires capability "
                     << "VariablePointers or VariablePointersStorageBuffer";
            break;
          }

          case spv::Op::OpTypeSampledImage:
          case spv::Op::OpTypeImage:
          case spv::Op::OpTypeSampler: {
            if (!_.HasCapability(spv::Capability::BindlessTextureNV))
              return _.diag(SPV_ERROR_INVALID_DATA, inst)
                     << "Using image/sampler with OpSelect requires capability "
                     << "BindlessTextureNV";
            break;
          }

          case spv::Op::OpTypeVector: {
            dimension = type_inst->word(3);
            break;
          }

          case spv::Op::OpTypeBool:
          case spv::Op::OpTypeInt:
          case spv::Op::OpTypeFloat: {
            break;
          }

          // Not RuntimeArray because of other rules.
          case spv::Op::OpTypeArray:
          case spv::Op::OpTypeMatrix:
          case spv::Op::OpTypeStruct: {
            if (!composites) return fail();
            break;
          }

          default:
            return fail();
        }

        const uint32_t condition_type = _.GetOperandTypeId(inst, 2);
        const uint32_t left_type = _.GetOperandTypeId(inst, 3);
        const uint32_t right_type = _.GetOperandTypeId(inst, 4);

        if (!condition_type || (!_.IsBoolScalarType(condition_type) &&
                                !_.IsBoolVectorType(condition_type)))
          return _.diag(SPV_ERROR_INVALID_DATA, inst)
                 << "Expected bool scalar or vector type as condition: "
                 << spvOpcodeString(opcode);

        if (_.GetDimension(condition_type) != dimension) {
          // If the condition is a vector type, then the result must also be a
          // vector with matching dimensions. In SPIR-V 1.4, a scalar condition
          // can be used to select between vector types. |composites| is a
          // proxy for SPIR-V 1.4 functionality.
          if (!composites || _.IsBoolVectorType(condition_type)) {
            return _.diag(SPV_ERROR_INVALID_DATA, inst)
                   << "Expected vector sizes of Result Type and the condition "
                      "to be equal: "
                   << spvOpcodeString(opcode);
          }
        }

        if (result_type != left_type || result_type != right_type)
          return _.diag(SPV_ERROR_INVALID_DATA, inst)
                 << "Expected both objects to be of Result Type: "
                 << spvOpcodeString(opcode);

        break;
      }
    }

    case spv::Op::OpIEqual:
    case spv::Op::OpINotEqual:
    case spv::Op::OpUGreaterThan:
    case spv::Op::OpUGreaterThanEqual:
    case spv::Op::OpULessThan:
    case spv::Op::OpULessThanEqual:
    case spv::Op::OpSGreaterThan:
    case spv::Op::OpSGreaterThanEqual:
    case spv::Op::OpSLessThan:
    case spv::Op::OpSLessThanEqual: {
      if (!_.IsBoolScalarType(result_type) && !_.IsBoolVectorType(result_type))
        return _.diag(SPV_ERROR_INVALID_DATA, inst)
               << "Expected bool scalar or vector type as Result Type: "
               << spvOpcodeString(opcode);

      const uint32_t left_type = _.GetOperandTypeId(inst, 2);
      const uint32_t right_type = _.GetOperandTypeId(inst, 3);

      if (!left_type ||
          (!_.IsIntScalarType(left_type) && !_.IsIntVectorType(left_type)))
        return _.diag(SPV_ERROR_INVALID_DATA, inst)
               << "Expected operands to be scalar or vector int: "
               << spvOpcodeString(opcode);

      if (_.GetDimension(result_type) != _.GetDimension(left_type))
        return _.diag(SPV_ERROR_INVALID_DATA, inst)
               << "Expected vector sizes of Result Type and the operands to be"
               << " equal: " << spvOpcodeString(opcode);

      if (!right_type ||
          (!_.IsIntScalarType(right_type) && !_.IsIntVectorType(right_type)))
        return _.diag(SPV_ERROR_INVALID_DATA, inst)
               << "Expected operands to be scalar or vector int: "
               << spvOpcodeString(opcode);

      if (_.GetDimension(result_type) != _.GetDimension(right_type))
        return _.diag(SPV_ERROR_INVALID_DATA, inst)
               << "Expected vector sizes of Result Type and the operands to be"
               << " equal: " << spvOpcodeString(opcode);

      if (_.GetBitWidth(left_type) != _.GetBitWidth(right_type))
        return _.diag(SPV_ERROR_INVALID_DATA, inst)
               << "Expected both operands to have the same component bit "
                  "width: "
               << spvOpcodeString(opcode);

      break;
    }

    default:
      break;
  }

  return SPV_SUCCESS;
}

}  // namespace val
}  // namespace spvtools