# The following variables will likely need to be modified, depending on where
# and how you built LLVM & Clang. They can be overridden in a command-line
# invocation of make, like:
#
#   make LLVM_SRC_PATH=<path> LIBCXX_INSTALL_PATH=<path> CLANG_PATH=<path> \
#        PNACL_BIN_PATH=<path> ...
#

# LLVM_SRC_PATH is the path to the root of the checked out source code. This
# directory should contain the configure script, the include/ and lib/
# directories of LLVM, Clang in tools/clang/, etc.
# Alternatively, if you're building vs. a binary download of LLVM, then
# LLVM_SRC_PATH can point to the main untarred directory.
LLVM_SRC_PATH ?= ../llvm

# The x86-32-specific sandboxed translator directory.
# It holds sandboxed versions of libraries and binaries.
SB_LLVM_PATH ?= $(shell readlink -e \
	../../out/sandboxed_translators_work/translator-i686/llvm-sb/Release)

# NACL_ROOT is the root of the native client repository.
NACL_ROOT ?= $(shell python -c "import sys; sys.path.insert(0, 'pydir'); \
	import utils; print utils.FindBaseNaCl()")

# TOOLCHAIN_ROOT is the location of NaCl/PNaCl toolchains and other
# tools like qemu.
TOOLCHAIN_ROOT ?= $(shell readlink -e $(NACL_ROOT)/toolchain/linux_x86)

# PNACL_TOOLCHAIN_ROOT is the location of the PNaCl toolchain.
# This is used as the default root for finding binutils, libcxx, etc.
PNACL_TOOLCHAIN_ROOT ?= $(shell readlink -e $(TOOLCHAIN_ROOT)/pnacl_newlib_raw)

# The location of PNaCl tools (e.g., binutils objdump, pnacl-clang++, etc.).
PNACL_BIN_PATH ?= $(shell readlink -e $(PNACL_TOOLCHAIN_ROOT)/bin)

# Hack to auto-detect autoconf versus cmake build of LLVM.  If the LLVM tools
# were dynamically linked with something like libLLVM-3.7svn.so, it is an
# autoconf build, otherwise it is a cmake build.  AUTOCONF is set to 0 for
# cmake, nonzero for autoconf.
AUTOCONF ?= $(shell ldd $(PNACL_BIN_PATH)/opt | grep -c libLLVM-)

# CLANG_PATH is the location of the clang compiler to use for building
# the host binaries.
CLANG_PATH ?= $(shell readlink -e \
	$(NACL_ROOT)/../third_party/llvm-build/Release+Asserts/bin)

# LIBCXX_INSTALL_PATH is the directory where libc++ is located. It should
# contain header files and corresponding libraries. This is used for
# building the host binaries in conjuction with clang.
LIBCXX_INSTALL_PATH ?= $(PNACL_TOOLCHAIN_ROOT)
STDLIB_FLAGS := -stdlib=libc++ -I$(LIBCXX_INSTALL_PATH)/include/c++/v1

HOST_ARCH ?= x86_64
ifeq ($(HOST_ARCH),x86_64)
  HOST_FLAGS = -m64
else
  ifeq ($(HOST_ARCH),x86)
    HOST_FLAGS = -m32
  endif
endif

ifdef DEBUG
  OBJDIR = build/Debug
  OPTLEVEL = -O0
  LINKOPTLEVEL = -O0
else
  OBJDIR = build/Release
  OPTLEVEL = -O2 -ffunction-sections -fdata-sections
  LINKOPTLEVEL = -O2
endif

# The list of CXX defines that are dependent on build parameters.
BASE_CXX_DEFINES =
CXX_EXTRA =
LD_EXTRA =

ifdef MINIMAL
  NOASSERT = 1
  OBJDIR := $(OBJDIR)+Min
  BASE_CXX_DEFINES += -DALLOW_DUMP=0 -DALLOW_LLVM_CL=0 -DALLOW_LLVM_IR=0 \
	-DALLOW_LLVM_IR_AS_INPUT=0 -DALLOW_DISABLE_IR_GEN=0 \
    -DALLOW_MINIMAL_BUILD=1
else
  BASE_CXX_DEFINES += -DALLOW_DUMP=1 -DALLOW_LLVM_CL=1 -DALLOW_LLVM_IR=1 \
	-DALLOW_LLVM_IR_AS_INPUT=1 -DALLOW_DISABLE_IR_GEN=1 \
    -DALLOW_MINIMAL_BUILD=0
endif

SB_CXX_DEFINES := $(BASE_CXX_DEFINES) -DPNACL_BROWSER_TRANSLATOR=1
CXX_DEFINES := $(BASE_CXX_DEFINES) -DPNACL_BROWSER_TRANSLATOR=0

ifdef NOASSERT
  ASSERTIONS = -DNDEBUG
else
  ASSERTIONS =
  OBJDIR := $(OBJDIR)+Asserts
endif

ifdef UBSAN
  OBJDIR := $(OBJDIR)+UBSan
  CXX_EXTRA += -fsanitize=undefined -fno-sanitize=vptr -fno-sanitize=nonnull-attribute
  LD_EXTRA += -fsanitize=undefined
endif

ifdef UBSAN_TRAP
  OBJDIR := $(OBJDIR)+UBSan_Trap
  CXX_EXTRA += -fsanitize=undefined-trap -fsanitize-undefined-trap-on-error -fno-sanitize=vptr -fno-sanitize=nonnull-attribute
  LD_EXTRA += -fsanitize=undefined-trap
endif

ifdef TSAN
  OBJDIR := $(OBJDIR)+TSan
  CXX_EXTRA += -fsanitize=thread
  LD_EXTRA += -fsanitize=thread
endif

ifdef ASAN
  OBJDIR := $(OBJDIR)+ASan
  CXX_EXTRA += -fsanitize=address
  LD_EXTRA += -fsanitize=address
endif

ifdef MSAN
  # TODO(ascull): this has an as yet undiagnosed uninitialized memory access
  OBJDIR := $(OBJDIR)+MSan
  CXX_EXTRA += -fsanitize=memory
  LD_EXTRA += -fsanitize=memory
endif

SB_OBJDIR := $(OBJDIR)+Sandboxed

$(info -----------------------------------------------)
$(info Using LLVM_SRC_PATH = $(LLVM_SRC_PATH))
$(info Using SB_LLVM_PATH = $(SB_LLVM_PATH))
$(info Using NACL_ROOT = $(NACL_ROOT))
$(info Using TOOLCHAIN_ROOT = $(TOOLCHAIN_ROOT))
$(info Using PNACL_TOOLCHAIN_ROOT = $(PNACL_TOOLCHAIN_ROOT))
$(info Using PNACL_BIN_PATH = $(PNACL_BIN_PATH))
$(info Using CLANG_PATH = $(CLANG_PATH))
$(info Using LIBCXX_INSTALL_PATH = $(LIBCXX_INSTALL_PATH))
$(info Using HOST_ARCH     = $(HOST_ARCH))
$(info -----------------------------------------------)

LLVM_CXXFLAGS := `$(PNACL_BIN_PATH)/llvm-config --cxxflags`
SB_LLVM_CXXFLAGS := $(LLVM_CXXFLAGS)

# Listing specific libraries that are needed for pnacl-sz
# and the unittests, since we build "tools-only" for the
# sandboxed_translators (which doesn't include every library
# listed by llvm-config).

LLVM_LIBS_LIST := -lLLVMIRReader -lLLVMBitReader -lLLVMNaClBitTestUtils \
    -lLLVMNaClBitReader -lLLVMNaClBitAnalysis -lLLVMNaClBitWriter \
    -lLLVMAsmParser -lLLVMNaClAnalysis -lLLVMCore -lLLVMSupport

ifeq ($(AUTOCONF), 0)
  # LLVM cmake build
  LLVM_LIBS := $(LLVM_LIBS_LIST)
  # For the cmake build, the gtest libs end up in the same place as the LLVM
  # libs, so no "-L..." arg is needed.
  GTEST_LIB_PATH ?=
  CLANG_FORMAT_PATH ?= $(PNACL_BIN_PATH)
else
  # LLVM autoconf build
  LLVM_LIBS := -lLLVM-3.7svn
  GTEST_LIB_PATH ?= -L../../out/llvm_x86_64_linux_work/Release+Asserts/lib
  CLANG_FORMAT_PATH ?= ../../out/llvm_x86_64_linux_work/Release+Asserts/bin
endif

LLVM_LDFLAGS := $(LLVM_LIBS) \
                `$(PNACL_BIN_PATH)/llvm-config --ldflags` \
                `$(PNACL_BIN_PATH)/llvm-config --system-libs`
SB_LLVM_LDFLAGS := $(LLVM_LIBS_LIST) \
                   -L$(SB_LLVM_PATH)/lib

CCACHE := `command -v ccache`
CXX := CCACHE_CPP2=yes $(CCACHE) $(CLANG_PATH)/clang++
SB_CXX := CCACHE_CPP2=yes $(CCACHE) $(PNACL_BIN_PATH)/pnacl-clang++
SB_TRANSLATE := $(PNACL_BIN_PATH)/pnacl-translate

# Extra warnings that LLVM's build system adds in addition to -Wall.
LLVM_EXTRA_WARNINGS := -Wcovered-switch-default

BASE_CXXFLAGS := -std=gnu++11 -Wall -Wextra -Werror -fno-rtti \
	-fno-exceptions $(OPTLEVEL) $(ASSERTIONS) -g -pedantic \
	$(LLVM_EXTRA_WARNINGS) $(CXX_EXTRA)

CXXFLAGS := $(LLVM_CXXFLAGS) $(BASE_CXXFLAGS) $(CXX_DEFINES) $(HOST_FLAGS) \
	$(STDLIB_FLAGS)
SB_CXXFLAGS := $(SB_LLVM_CXXFLAGS) $(BASE_CXXFLAGS) $(SB_CXX_DEFINES)

LDFLAGS := $(HOST_FLAGS) -L$(LIBCXX_INSTALL_PATH)/lib -Wl,--gc-sections \
	$(LD_EXTRA) $(STDLIB_FLAGS)
# Not specifying -Wl,--gc-sections but instead doing bitcode linking GC w/ LTO.
SB_LDFLAGS := $(LINKOPTLEVEL) $(LD_EXTRA)

SRCS = \
	IceAssembler.cpp \
	IceBrowserCompileServer.cpp \
	IceCfg.cpp \
	IceCfgNode.cpp \
	IceClFlags.cpp \
	IceCompiler.cpp \
	IceCompileServer.cpp \
	IceELFObjectWriter.cpp \
	IceELFSection.cpp \
	IceFixups.cpp \
	IceGlobalContext.cpp \
	IceGlobalInits.cpp \
	IceInst.cpp \
	IceInstARM32.cpp \
	IceInstMIPS32.cpp \
	IceInstX8632.cpp \
	IceInstX8664.cpp \
	IceIntrinsics.cpp \
	IceLiveness.cpp \
	IceLoopAnalyzer.cpp \
	IceOperand.cpp \
	IceRegAlloc.cpp \
	IceRNG.cpp \
	IceSwitchLowering.cpp \
	IceTargetLowering.cpp \
	IceTargetLoweringARM32.cpp \
	IceTargetLoweringMIPS32.cpp \
	IceTargetLoweringX8632.cpp \
	IceTargetLoweringX8664.cpp \
	IceThreading.cpp \
	IceTimerTree.cpp \
	IceTranslator.cpp \
	IceTypes.cpp \
	main.cpp \
	PNaClTranslator.cpp

ifndef MINIMAL
  SRCS += IceConverter.cpp \
	IceTypeConverter.cpp
endif

OBJS=$(patsubst %.cpp, $(OBJDIR)/%.o, $(SRCS))
SB_OBJS=$(patsubst %.cpp, $(SB_OBJDIR)/%.o, $(SRCS))

UNITTEST_SRCS = \
	BitcodeMunge.cpp \
	IceELFSectionTest.cpp \
	IceParseInstsTest.cpp

# The X86 assembler tests take too long to compile. Given how infrequently the
# assembler will change, we disable them.
ifdef CHECK_X86_ASM
ifndef DEBUG
$(error Run check-unit with DEBUG=1 lest your machine perish)
endif
  UNITTEST_SRCS += AssemblerX8632/LowLevel.cpp \
        AssemblerX8632/DataMov.cpp \
        AssemblerX8632/Locked.cpp \
        AssemblerX8632/GPRArith.cpp \
        AssemblerX8632/XmmArith.cpp \
        AssemblerX8632/ControlFlow.cpp \
        AssemblerX8632/Other.cpp \
        AssemblerX8632/X87.cpp \
        AssemblerX8664/LowLevel.cpp \
        AssemblerX8664/DataMov.cpp \
        AssemblerX8664/Locked.cpp \
        AssemblerX8664/GPRArith.cpp \
        AssemblerX8664/XmmArith.cpp \
        AssemblerX8664/ControlFlow.cpp \
        AssemblerX8664/Other.cpp
endif

UNITTEST_OBJS = $(patsubst %.cpp, $(OBJDIR)/unittest/%.o, $(UNITTEST_SRCS))
UNITTEST_LIB_OBJS = $(filter-out $(OBJDIR)/main.o,$(OBJS))

# Keep all the first target so it's the default.
all: $(OBJDIR)/pnacl-sz make_symlink runtime

ifdef TSAN
sb:
	@echo "Skipping pnacl-sz.*.nexe: TSAN isn't supported under NaCl."
else
sb: $(SB_OBJDIR)/pnacl-sz.x86-32.nexe
endif

# SHOW_BUILD_ATTS is an executable that is run to show what build
# attributes were used to build pnacl-sz.
SHOW_BUILD_ATTS = $(OBJDIR)/pnacl-sz --build-atts

# Creates symbolic link so that testing is easier. Also runs
# pnacl-sz to verify that the defines flags have valid values,
# as well as describe the corresponding build attributes.
make_symlink: $(OBJDIR)/pnacl-sz
	rm -rf pnacl-sz
	ln -s $(OBJDIR)/pnacl-sz
	@echo "Build Attributes:"
	@$(SHOW_BUILD_ATTS)

.PHONY: all make_symlink runtime bloat sb docs

$(OBJDIR)/pnacl-sz: $(OBJS)
	$(CXX) $(LDFLAGS) -o $@ $^ $(LLVM_LDFLAGS) \
               -Wl,-rpath=$(abspath $(LIBCXX_INSTALL_PATH)/lib)

$(SB_OBJDIR)/pnacl-sz.x86-32.nexe: $(SB_OBJS)
	$(eval PNACL_SZ_BASE := $(patsubst %.nexe, %, $@))
	$(SB_CXX) $(SB_LDFLAGS) -o $(PNACL_SZ_BASE).nonfinal.pexe $^ \
		$(SB_LLVM_LDFLAGS)
	$(SB_TRANSLATE) -arch x86-32 $(PNACL_SZ_BASE).nonfinal.pexe -o $@ \
		--allow-llvm-bitcode-input

# TODO(stichnot): Be more precise than "*.h" here and elsewhere.
$(OBJS): $(OBJDIR)/%.o: src/%.cpp src/*.h src/*.def
	$(CXX) -c $(CXXFLAGS) $< -o $@

$(SB_OBJS): $(SB_OBJDIR)/%.o: src/%.cpp src/*.h src/*.def
	$(SB_CXX) -c $(SB_CXXFLAGS) $< -o $@

$(OBJDIR)/run_unittests: $(UNITTEST_OBJS) $(UNITTEST_LIB_OBJS)
	$(CXX) $(GTEST_LIB_PATH) $(LDFLAGS) -o $@ $^ $(LLVM_LDFLAGS) \
               -lgtest -lgtest_main -ldl \
               -Wl,-rpath=$(abspath $(LIBCXX_INSTALL_PATH)/lib)

$(UNITTEST_OBJS): $(OBJDIR)/unittest/%.o: unittest/%.cpp \
		unittest/*.h src/*.h src/*.def
	$(CXX) -c $(CXXFLAGS) \
		-Isrc/ \
                -Iunittest/ \
		-I$(LLVM_SRC_PATH)/utils/unittest/googletest/include \
		-I$(LLVM_SRC_PATH) \
		-DGTEST_HAS_RTTI=0 -DGTEST_USE_OWN_TR1_TUPLE \
		$< -o $@

$(OBJS): | $(OBJDIR)
$(SB_OBJS): | $(SB_OBJDIR)

$(UNITTEST_OBJS): | $(OBJDIR)/unittest $(OBJDIR)/unittest/AssemblerX8632 $(OBJDIR)/unittest/AssemblerX8664

$(OBJDIR):
	@mkdir -p $@
$(SB_OBJDIR):
	@mkdir -p $@

$(OBJDIR)/unittest: $(OBJDIR)
	@mkdir -p $@

$(OBJDIR)/unittest/AssemblerX8632: $(OBJDIR)/unittest
	@mkdir -p $@
$(OBJDIR)/unittest/AssemblerX8664: $(OBJDIR)/unittest
	@mkdir -p $@

RT_SRC := runtime/szrt.c runtime/szrt_ll.ll runtime/szrt_profiler.c
RT_OBJ := build/runtime/szrt_native_x8632.o build/runtime/szrt_sb_x8632.o \
	build/runtime/szrt_native_x8664.o build/runtime/szrt_sb_x8664.o \
	build/runtime/szrt_native_arm32.o build/runtime/szrt_sb_arm32.o

runtime: $(RT_OBJ)

# Use runtime.is.built so that build-runtime.py is invoked only once
# even in a parallel build.
.INTERMEDIATE: runtime.is.built
$(RT_OBJ): runtime.is.built
runtime.is.built: $(RT_SRC) pydir/build-runtime.py
	@echo ================ Building Subzero runtime ================
	./pydir/build-runtime.py -v --pnacl-root $(PNACL_TOOLCHAIN_ROOT)

check-lit: $(OBJDIR)/pnacl-sz make_symlink
	PNACL_BIN_PATH=$(PNACL_BIN_PATH) \
	$(LLVM_SRC_PATH)/utils/lit/lit.py -sv tests_lit

ifdef MINIMAL
check-xtest: $(OBJDIR)/pnacl-sz make_symlink runtime
	@echo "Crosstests disabled, minimal build"
else
check-xtest: $(OBJDIR)/pnacl-sz make_symlink runtime
       # Do all native/sse2 tests, but only test_vector_ops for native/sse4.1.
       # For (slow) sandboxed tests, limit to Om1/sse4.1.
       # TODO(jpp): implement x8664 sandbox, then enable xtests.
       # TODO(jpp): reenable the x86-64 tests.
	./pydir/crosstest_generator.py -v --lit \
	  --toolchain-root $(TOOLCHAIN_ROOT) \
	  -i x8632,native,sse2 \
	  -i x8632,native,sse4.1,test_vector_ops \
	  -i x8632,sandbox,sse4.1,Om1 \
	  -e x8664,native,sse2 \
	  -e x8664,native,sse4.1,test_vector_ops \
	  -e x8664,native,sse2,test_global \
	  -i arm32,native,neon \
	  -e arm32,native,neon,test_sync_atomic \
	  -e arm32,native,neon,test_vector_ops \
	  -e arm32,native,neon,test_select
	PNACL_BIN_PATH=$(PNACL_BIN_PATH) \
	$(LLVM_SRC_PATH)/utils/lit/lit.py -sv crosstest/Output
endif

check-unit: $(OBJDIR)/run_unittests
	$(OBJDIR)/run_unittests

check: check-lit check-unit check-xtest

FORMAT_BLACKLIST =
# Add one of the following lines for each source file to ignore.
FORMAT_BLACKLIST += ! -name IceParseInstsTest.cpp
FORMAT_BLACKLIST += ! -name IceParseTypesTest.cpp
format:
	$(CLANG_FORMAT_PATH)/clang-format -style=LLVM -i \
	`find . -regex '.*\.\(c\|h\|cpp\)' $(FORMAT_BLACKLIST)`

format-diff:
	git diff -U0 `git merge-base HEAD master` | \
	PATH=$(PNACL_BIN_PATH):$(PATH) \
	$(LLVM_SRC_PATH)/../clang/tools/clang-format/clang-format-diff.py \
	-p1 -style=LLVM -i

bloat: make_symlink
	nm -C -S -l pnacl-sz | \
	bloat/bloat.py --nm-output=/dev/stdin syms > build/pnacl-sz.bloat.json
	@echo See Subzero size breakdown in bloat/pnacl-sz.bloat.html

docs:
	doxygen Doxyfile
	@echo See file://`pwd`/docs/html/index.html

clean:
	rm -rf pnacl-sz *.o $(OBJDIR) $(SB_OBJDIR) build/pnacl-sz.bloat.json

clean-all: clean
	rm -rf build/ docs/